Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754008Ab2H0R4W (ORCPT ); Mon, 27 Aug 2012 13:56:22 -0400 Received: from mail-lpp01m010-f46.google.com ([209.85.215.46]:48445 "EHLO mail-lpp01m010-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751567Ab2H0R4T (ORCPT ); Mon, 27 Aug 2012 13:56:19 -0400 Message-ID: <503BB4BB.4080307@gmail.com> Date: Mon, 27 Aug 2012 19:56:11 +0200 From: Arvydas Sidorenko User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:14.0) Gecko/20120713 Thunderbird/14.0 MIME-Version: 1.0 To: Jeff Garzik CC: linux-kernel@vger.kernel.org, IDE/ATA development list Subject: Re: Storage related regression in linux-next 20120824 References: <503BA2DB.9080704@gmail.com> In-Reply-To: <503BA2DB.9080704@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 80082 Lines: 1530 On 08/27/2012 06:39 PM, Arvydas Sidorenko wrote: >> Can you pastebin 'dmesg' and 'lspci'? Did this occur only once, or is >> it reproducible? >> >> Jeff > It does happen every time when booting into -next 20120824. > > #lspci > 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor > Family DRAM Controller (rev 09) > 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core > Processor Family PCI Express Root Port (rev 09) > 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core > Processor Family PCI Express Root Port (rev 09) > 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation > Core Processor Family Integrated Graphics Controller (rev 09) > 00:16.0 Communication controller: Intel Corporation 6 Series/C200 > Series Chipset Family MEI Controller #1 (rev 04) > 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset > Family USB Universal Host Controller #5 (rev 05) > 00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset > Family USB Enhanced Host Controller #2 (rev 05) > 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset > Family High Definition Audio Controller (rev 05) > 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 1 (rev b5) > 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 2 (rev b5) > 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset > Family PCI Express Root Port 3 (rev b5) > 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset > Family USB Universal Host Controller #1 (rev 05) > 00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset > Family USB Enhanced Host Controller #1 (rev 05) > 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC > Controller (rev 05) > 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset > Family 4 port SATA IDE Controller (rev 05) > 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family > SMBus Controller (rev 05) > 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 > Gigabit Ethernet PCIe (rev 10) > 02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 > Memory Card Reader (rev 10) > 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n > (rev 02) > 04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express > to PCI Bridge [Cheetah Express] (rev 01) > 05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221 > IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) > > > #dmesg > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.6.0-rc3-next-20120824 (asido@slacker) > (gcc version 4.6.3 (Gentoo 4.6.3 p1.5, pie-0.5.2) ) #9 SMP Sun Aug 26 > 15:54:31 CEST 2012 > [ 0.000000] Command line: root=/dev/sda4 > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] > usable > [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] > usable > [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000008ad33fff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000008ad34000-0x000000008ad5efff] > ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000008ad5f000-0x000000008afa1fff] > ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000008afa2000-0x000000008affefff] > reserved > [ 0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] > ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fdfffff] > usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.4 present. > [ 0.000000] DMI: Apple Inc. Macmini5,1/Mac-8ED6AF5B48C039E1, BIOS > MM51.88Z.0077.B0F.1110201309 10/20/2011 > [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> > reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x26fe00 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: write-back > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-DFFFF write-protect > [ 0.000000] E0000-FFFFF uncachable > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable > [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable > [ 0.000000] 2 base 090000000 mask FF0000000 uncachable > [ 0.000000] 3 base 08C000000 mask FFC000000 uncachable > [ 0.000000] 4 base 08B800000 mask FFF800000 uncachable > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] 8 disabled > [ 0.000000] 9 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] e820: last_pfn = 0x8ad34 max_arch_pfn = 0x400000000 > [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] > [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size > 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x8ad33fff] > [ 0.000000] [mem 0x00000000-0x8abfffff] page 2M > [ 0.000000] [mem 0x8ac00000-0x8ad33fff] page 4k > [ 0.000000] kernel direct mapping tables up to 0x8ad33fff @ [mem > 0x1fba5000-0x1fffffff] > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x26fdfffff] > [ 0.000000] [mem 0x100000000-0x26fdfffff] page 2M > [ 0.000000] kernel direct mapping tables up to 0x26fdfffff @ [mem > 0x8ad29000-0x8ad33fff] > [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE ) > [ 0.000000] ACPI: XSDT 000000008ad8e1c0 000B4 (v01 APPLE Apple00 > 00000060 01000013) > [ 0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 > 00000060 Loki 0000005F) > [ 0.000000] ACPI: DSDT 000000008ad81000 0500C (v01 APPLE Macmini > 00050001 INTL 20100915) > [ 0.000000] ACPI: FACS 000000008ad3e000 00040 > [ 0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 > 00000001 Loki 0000005F) > [ 0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 > 00000001 Loki 0000005F) > [ 0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 > 00000001 Loki 0000005F) > [ 0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 > 00000001 Loki 0000005F) > [ 0.000000] ACPI: SSDT 000000008ad7d000 00024 (v01 APPLE SmcDppt > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad7a000 00643 (v01 APPLE UsbNoRmh > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad78000 0013F (v01 APPLE SataPrt1 > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad73000 01580 (v02 APPLE SsdtIGPU > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad72000 0060E (v01 PmRef Cpu0Ist > 00003000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad71000 009B1 (v01 PmRef CpuPm > 00003000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad70000 00315 (v01 PmRef Cpu0Tst > 00003000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad6f000 0037A (v01 PmRef ApTst > 00003000 INTL 20100915) > [ 0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 > 00000001 Loki 0000005F) > [ 0.000000] ACPI: SSDT 000000008ad80000 000FA (v01 SataRe SataPri > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad7f000 000FA (v01 SataRe SataSec > 00001000 INTL 20100915) > [ 0.000000] ACPI: SSDT 000000008ad7e000 00032 (v01 Apple SsdtS3 > 00001000 INTL 20100915) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem > 0x0000000000000000-0x000000026fdfffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x26fdfffff] > [ 0.000000] NODE_DATA [mem 0x26fdfc000-0x26fdfffff] > [ 0.000000] [ffffea0000000000-ffffea0009bfffff] PMD -> > [ffff880267400000-ffff88026f3fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00010000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x26fdfffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00010000-0x0008efff] > [ 0.000000] node 0: [mem 0x00090000-0x0009efff] > [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] > [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] > [ 0.000000] node 0: [mem 0x40200000-0x8ad33fff] > [ 0.000000] node 0: [mem 0x100000000-0x26fdfffff] > [ 0.000000] On node 0 totalpages: 2074306 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 6 pages reserved > [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 16320 pages used for memmap > [ 0.000000] DMA32 zone: 547188 pages, LIFO batch:31 > [ 0.000000] Normal zone: 23544 pages used for memmap > [ 0.000000] Normal zone: 1483272 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, > GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4 > [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000008f000 - > 0000000000090000 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 0000000020000000 - > 0000000020200000 > [ 0.000000] PM: Registered nosave memory: 0000000040000000 - > 0000000040200000 > [ 0.000000] PM: Registered nosave memory: 000000008ad34000 - > 000000008ad5f000 > [ 0.000000] PM: Registered nosave memory: 000000008ad5f000 - > 000000008afa2000 > [ 0.000000] PM: Registered nosave memory: 000000008afa2000 - > 000000008afff000 > [ 0.000000] PM: Registered nosave memory: 000000008afff000 - > 000000008b000000 > [ 0.000000] PM: Registered nosave memory: 000000008b000000 - > 000000008fa00000 > [ 0.000000] PM: Registered nosave memory: 000000008fa00000 - > 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - > 00000000f0000000 > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - > 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - > 00000000fec01000 > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - > 00000000fed00000 > [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - > 00000000fed04000 > [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - > 00000000fed10000 > [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - > 00000000fed14000 > [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - > 00000000fed18000 > [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - > 00000000fed1a000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - > 00000000fed1c000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - > 00000000fed20000 > [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - > 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - > 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - > 00000000ff800000 > [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - > 0000000100000000 > [ 0.000000] e820: [mem 0x8fa00000-0xdfffffff] available for PCI > devices > [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88026fa00000 s78272 > r8192 d24128 u524288 > [ 0.000000] pcpu-alloc: s78272 r8192 d24128 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 2034372 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: root=/dev/sda4 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] __ex_table already sorted, skipping sort > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - > bailing! > [ 0.000000] Memory: 8084852k/10221568k available (7059k kernel > code, 1924344k absent, 212372k reserved, 5915k data, 600k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, > CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.001000] tsc: Detected 2294.757 MHz processor > [ 0.000001] Calibrating delay loop (skipped), value calculated > using timer frequency.. 4589.51 BogoMIPS (lpj=2294757) > [ 0.000152] pid_max: default: 32768 minimum: 301 > [ 0.000246] Security Framework initialized > [ 0.000319] SELinux: Initializing. > [ 0.000396] SELinux: Starting in permissive mode > [ 0.000848] Dentry cache hash table entries: 1048576 (order: 11, > 8388608 bytes) > [ 0.002653] Inode-cache hash table entries: 524288 (order: 10, > 4194304 bytes) > [ 0.003478] Mount-cache hash table entries: 256 > [ 0.003706] Initializing cgroup subsys cpuacct > [ 0.003780] Initializing cgroup subsys freezer > [ 0.003871] CPU: Physical Processor ID: 0 > [ 0.003944] CPU: Processor Core ID: 0 > [ 0.004020] mce: CPU supports 7 MCE banks > [ 0.004102] CPU0: Thermal monitoring enabled (TM1) > [ 0.004180] process: using mwait in idle threads > [ 0.004266] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 > [ 0.004266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 > [ 0.004266] tlb_flushall_shift: 5 > [ 0.004526] Freeing SMP alternatives: 24k freed > [ 0.004606] ACPI: Core revision 20120711 > [ 0.010917] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.021489] smpboot: CPU0: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz > stepping 07 > [ 0.123160] Performance Events: PEBS fmt1+, 16-deep LBR, > SandyBridge events, Intel PMU driver. > [ 0.123429] perf_event_intel: PEBS disabled due to CPU errata, > please upgrade microcode > [ 0.123535] ... version: 3 > [ 0.123607] ... bit width: 48 > [ 0.123680] ... generic registers: 4 > [ 0.123752] ... value mask: 0000ffffffffffff > [ 0.123827] ... max period: 000000007fffffff > [ 0.123902] ... fixed-purpose events: 3 > [ 0.123975] ... event mask: 000000070000000f > [ 0.124217] smpboot: Booting Node 0, Processors #1 #2 #3 OK > [ 0.164119] Brought up 4 CPUs > [ 0.164196] smpboot: Total of 4 processors activated (18358.05 > BogoMIPS) > [ 0.167186] devtmpfs: initialized > [ 0.167382] PM: Registering ACPI NVS region [mem > 0x8ad34000-0x8ad5efff] (176128 bytes) > [ 0.167533] RTC time: 16:13:27, date: 08/27/12 > [ 0.167640] NET: Registered protocol family 16 > [ 0.167774] kworker/u:0 (28) used greatest stack depth: 6536 bytes > left > [ 0.167856] kworker/u:0 (29) used greatest stack depth: 5544 bytes > left > [ 0.168081] ACPI: bus type pci registered > [ 0.168236] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem > 0xe0000000-0xe9cfffff] (base 0xe0000000) > [ 0.168345] PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved > in E820 > [ 0.184749] PCI: Using configuration type 1 for base access > [ 0.190640] bio: create slab at 0 > [ 0.190938] ACPI: Added _OSI(Module Device) > [ 0.191013] ACPI: Added _OSI(Processor Device) > [ 0.191087] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.191165] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.192359] ACPI: EC: EC description table is found, configuring > boot EC > [ 0.196071] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > [ 2.195270] ACPI: SSDT 000000008ad39190 00781 (v01 PmRef Cpu0Cst > 00003001 INTL 20100915) > [ 2.195742] ACPI: Dynamic OEM Table Load: > [ 2.195897] ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst > 00003001 INTL 20100915) > [ 2.201116] ACPI: SSDT 000000008ad3a710 003A4 (v01 PmRef ApIst > 00003000 INTL 20100915) > [ 2.201625] ACPI: Dynamic OEM Table Load: > [ 2.201776] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst > 00003000 INTL 20100915) > [ 2.205988] ACPI: SSDT 000000008ad38d90 00119 (v01 PmRef ApCst > 00003000 INTL 20100915) > [ 2.206454] ACPI: Dynamic OEM Table Load: > [ 2.206606] ACPI: SSDT (null) 00119 (v01 PmRef ApCst > 00003000 INTL 20100915) > [ 2.211315] ACPI: Interpreter enabled > [ 2.211390] ACPI: (supports S0 S3 S4 S5) > [ 2.211635] ACPI: Using IOAPIC for interrupt routing > [ 2.219475] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data > = 0x62 > [ 2.219707] ACPI: No dock devices found. > [ 2.219781] PCI: Using host bridge windows from ACPI; if necessary, > use "pci=nocrs" and report a bug > [ 2.220163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 2.220678] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for > domain 0000 [bus 00-9c] only partially covers this bridge > [ 2.220829] PCI host bridge to bus 0000:00 > [ 2.220905] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted > under domain [bus 00-ff] > [ 2.220907] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 2.220983] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 2.221061] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 2.221138] pci_bus 0000:00: root bus resource [mem > 0x000a0000-0x000bffff] > [ 2.221216] pci_bus 0000:00: root bus resource [mem > 0x8fa00000-0xfeafffff] > [ 2.221294] pci_bus 0000:00: root bus resource [mem > 0xfed40000-0xfed44fff] > [ 2.221379] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 > [ 2.221416] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 > [ 2.221447] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 2.221459] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400 > [ 2.221488] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold > [ 2.221505] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 > [ 2.221515] pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff > 64bit] > [ 2.221521] pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff > 64bit pref] > [ 2.221525] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f] > [ 2.221579] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 > [ 2.221601] pci 0000:00:16.0: reg 10: [mem 0xa0907100-0xa090710f > 64bit] > [ 2.221680] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 2.221708] pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300 > [ 2.221751] pci 0000:00:1a.0: reg 20: [io 0x2120-0x213f] > [ 2.221817] pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320 > [ 2.221837] pci 0000:00:1a.7: reg 10: [mem 0xa0906c00-0xa0906fff] > [ 2.221928] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 2.221956] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 > [ 2.221970] pci 0000:00:1b.0: reg 10: [mem 0xa0900000-0xa0903fff > 64bit] > [ 2.222041] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 2.222064] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 > [ 2.222144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 2.222169] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 > [ 2.222249] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 2.222273] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 > [ 2.222353] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 2.222383] pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300 > [ 2.222430] pci 0000:00:1d.0: reg 20: [io 0x20c0-0x20df] > [ 2.222504] pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320 > [ 2.222525] pci 0000:00:1d.7: reg 10: [mem 0xa0906800-0xa0906bff] > [ 2.222617] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 2.222643] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 > [ 2.222765] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f > [ 2.222780] pci 0000:00:1f.2: reg 10: [io 0x2148-0x214f] > [ 2.222788] pci 0000:00:1f.2: reg 14: [io 0x215c-0x215f] > [ 2.222796] pci 0000:00:1f.2: reg 18: [io 0x2140-0x2147] > [ 2.222808] pci 0000:00:1f.2: reg 1c: [io 0x2158-0x215b] > [ 2.222816] pci 0000:00:1f.2: reg 20: [io 0x2060-0x206f] > [ 2.222824] pci 0000:00:1f.2: reg 24: [io 0xffe0-0xffef] > [ 2.222872] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 > [ 2.222888] pci 0000:00:1f.3: reg 10: [mem 0xa0907000-0xa09070ff > 64bit] > [ 2.222909] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] > [ 2.222959] pci_bus 0000:01: busn_res: [bus 01] is inserted under > [bus 00-ff] > [ 2.222961] pci 0000:00:01.0: PCI bridge to [bus 01] > [ 2.223040] pci 0000:00:01.0: bridge window [mem > 0xa0800000-0xa08fffff] > [ 2.223062] pci_bus 0000:06: busn_res: [bus 06-9c] is inserted > under [bus 00-ff] > [ 2.223065] pci 0000:00:01.1: PCI bridge to [bus 06-9c] > [ 2.223140] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff] > [ 2.223142] pci 0000:00:01.1: bridge window [mem > 0xa0a00000-0xa4efffff] > [ 2.223145] pci 0000:00:01.1: bridge window [mem > 0xa4f00000-0xa8efffff 64bit pref] > [ 2.223188] pci_bus 0000:02: busn_res: [bus 02] is inserted under > [bus 00-ff] > [ 2.223255] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000 > [ 2.223288] pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa040ffff > 64bit pref] > [ 2.223316] pci 0000:02:00.0: reg 18: [mem 0xa0410000-0xa041ffff > 64bit pref] > [ 2.223468] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > [ 2.223540] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 > [ 2.223573] pci 0000:02:00.1: reg 10: [mem 0xa0420000-0xa042ffff > 64bit pref] > [ 2.223753] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold > [ 2.225875] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 2.225980] pci 0000:00:1c.0: bridge window [mem > 0xa0700000-0xa07fffff] > [ 2.225986] pci 0000:00:1c.0: bridge window [mem > 0xa0400000-0xa04fffff 64bit pref] > [ 2.226034] pci_bus 0000:03: busn_res: [bus 03] is inserted under > [bus 00-ff] > [ 2.226103] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000 > [ 2.226149] pci 0000:03:00.0: reg 10: [mem 0xa0600000-0xa0603fff > 64bit] > [ 2.226417] pci 0000:03:00.0: supports D1 D2 > [ 2.226419] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > [ 2.227841] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 2.227953] pci 0000:00:1c.1: bridge window [mem > 0xa0600000-0xa06fffff] > [ 2.228002] pci_bus 0000:04: busn_res: [bus 04-05] is inserted > under [bus 00-ff] > [ 2.228039] pci 0000:04:00.0: [104c:823e] type 01 class 0x060400 > [ 2.228223] pci 0000:04:00.0: supports D1 D2 > [ 2.229828] pci 0000:00:1c.2: PCI bridge to [bus 04-05] > [ 2.229945] pci 0000:00:1c.2: bridge window [mem > 0xa0500000-0xa05fffff] > [ 2.230062] pci_bus 0000:05: busn_res: [bus 05] is inserted under > [bus 04-05] > [ 2.230086] pci 0000:05:00.0: [104c:823f] type 00 class 0x0c0010 > [ 2.230119] pci 0000:05:00.0: reg 10: [mem 0xa0504000-0xa05047ff] > [ 2.230140] pci 0000:05:00.0: reg 14: [mem 0xa0500000-0xa0503fff] > [ 2.230297] pci 0000:05:00.0: supports D1 D2 > [ 2.230299] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot > [ 2.230399] pci 0000:04:00.0: PCI bridge to [bus 05] > [ 2.230490] pci 0000:04:00.0: bridge window [mem > 0xa0500000-0xa05fffff] > [ 2.230532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 2.230614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] > [ 2.230646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] > [ 2.230684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 2.230714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 2.230740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > [ 2.230830] pci0000:00: Requesting ACPI _OSC control (0x1d) > [ 2.230974] pci0000:00: ACPI _OSC control (0x1d) granted > [ 2.234433] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *11 > [ 2.235086] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 > 12 14 15) > [ 2.235673] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *11 > [ 2.236332] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 > 12 14 15) > [ 2.236920] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *0, disabled. > [ 2.237613] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 > 14 15) *10 > [ 2.238263] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *11 > [ 2.238914] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 > 12 14 15) > [ 2.239591] vgaarb: device added: > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 2.239702] vgaarb: loaded > [ 2.239773] vgaarb: bridge control possible 0000:00:02.0 > [ 2.239950] SCSI subsystem initialized > [ 2.240026] ACPI: bus type scsi registered > [ 2.240170] libata version 3.00 loaded. > [ 2.240255] ACPI: bus type usb registered > [ 2.240375] usbcore: registered new interface driver usbfs > [ 2.240477] usbcore: registered new interface driver hub > [ 2.240583] usbcore: registered new device driver usb > [ 2.240827] Advanced Linux Sound Architecture Driver Version 1.0.25. > [ 2.240905] PCI: Using ACPI for IRQ routing > [ 2.242412] PCI: pci_cache_line_size set to 64 bytes > [ 2.242581] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] > [ 2.242582] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] > [ 2.242584] e820: reserve RAM buffer [mem 0x8ad34000-0x8bffffff] > [ 2.242586] e820: reserve RAM buffer [mem 0x26fe00000-0x26fffffff] > [ 2.242804] cfg80211: Calling CRDA to update world regulatory domain > [ 2.242916] NetLabel: Initializing > [ 2.242991] NetLabel: domain hash size = 128 > [ 2.243065] NetLabel: protocols = UNLABELED CIPSOv4 > [ 2.243156] NetLabel: unlabeled traffic allowed by default > [ 2.243308] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > [ 2.243744] hpet0: 8 comparators, 64-bit 14.318180 MHz counter > [ 2.245835] Switching to clocksource hpet > [ 2.248152] pnp: PnP ACPI init > [ 2.248232] ACPI: bus type pnp registered > [ 2.248570] pnp 00:00: [bus 00-ff] > [ 2.248573] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 2.248574] pnp 00:00: [io 0x0cf8-0x0cff] > [ 2.248576] pnp 00:00: [io 0x0d00-0xffff window] > [ 2.248578] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 2.248580] pnp 00:00: [mem 0x000c0000-0x000c3fff window] > [ 2.248581] pnp 00:00: [mem 0x000c4000-0x000c7fff window] > [ 2.248583] pnp 00:00: [mem 0x000c8000-0x000cbfff window] > [ 2.248584] pnp 00:00: [mem 0x000cc000-0x000cffff window] > [ 2.248586] pnp 00:00: [mem 0x000d0000-0x000d3fff window] > [ 2.248587] pnp 00:00: [mem 0x000d4000-0x000d7fff window] > [ 2.248589] pnp 00:00: [mem 0x000d8000-0x000dbfff window] > [ 2.248591] pnp 00:00: [mem 0x000dc000-0x000dffff window] > [ 2.248592] pnp 00:00: [mem 0x000e0000-0x000e3fff window] > [ 2.248594] pnp 00:00: [mem 0x000e4000-0x000e7fff window] > [ 2.248595] pnp 00:00: [mem 0x000e8000-0x000ebfff window] > [ 2.248597] pnp 00:00: [mem 0x000ec000-0x000effff window] > [ 2.248598] pnp 00:00: [mem 0x000f0000-0x000fffff window] > [ 2.248600] pnp 00:00: [mem 0x8fa00000-0xfeafffff window] > [ 2.248602] pnp 00:00: [mem 0xfed40000-0xfed44fff window] > [ 2.248683] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 > PNP0a03 (active) > [ 2.248754] pnp 00:01: [io 0x0000-0x001f] > [ 2.248756] pnp 00:01: [io 0x0081-0x0091] > [ 2.248757] pnp 00:01: [io 0x0093-0x009f] > [ 2.248758] pnp 00:01: [io 0x00c0-0x00df] > [ 2.248760] pnp 00:01: [dma 4] > [ 2.248811] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) > [ 2.248819] pnp 00:02: [mem 0xff000000-0xffffffff] > [ 2.248864] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) > [ 2.248929] pnp 00:03: [irq 0 disabled] > [ 2.248938] pnp 00:03: [irq 8] > [ 2.248939] pnp 00:03: [mem 0xfed00000-0xfed003ff] > [ 2.249002] system 00:03: [mem 0xfed00000-0xfed003ff] has been > reserved > [ 2.249081] system 00:03: Plug and Play ACPI device, IDs PNP0103 > PNP0c01 (active) > [ 2.249090] pnp 00:04: [io 0x00f0] > [ 2.249095] pnp 00:04: [irq 13] > [ 2.249144] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 2.249152] pnp 00:05: [io 0x002e-0x002f] > [ 2.249154] pnp 00:05: [io 0x004e-0x004f] > [ 2.249155] pnp 00:05: [io 0x0061] > [ 2.249157] pnp 00:05: [io 0x0063] > [ 2.249158] pnp 00:05: [io 0x0065] > [ 2.249160] pnp 00:05: [io 0x0067] > [ 2.249161] pnp 00:05: [io 0x0080] > [ 2.249162] pnp 00:05: [io 0x0092] > [ 2.249165] pnp 00:05: [io 0x00b2-0x00b3] > [ 2.249167] pnp 00:05: [io 0x1000-0x100f] > [ 2.249168] pnp 00:05: [io 0x0400-0x047f] > [ 2.249170] pnp 00:05: [io 0x0500-0x057f] > [ 2.249228] system 00:05: [io 0x1000-0x100f] has been reserved > [ 2.249314] system 00:05: [io 0x0400-0x047f] has been reserved > [ 2.249391] system 00:05: [io 0x0500-0x057f] has been reserved > [ 2.249469] system 00:05: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 2.249476] pnp 00:06: [io 0x0070-0x0077] > [ 2.249522] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 2.249531] pnp 00:07: [io 0x0300-0x031f] > [ 2.249537] pnp 00:07: [irq 6] > [ 2.249583] pnp 00:07: Plug and Play ACPI device, IDs APP0001 (active) > [ 2.249593] pnp 00:08: [io 0x0700-0x07fe] > [ 2.249644] pnp 00:08: Plug and Play ACPI device, IDs APP000b (active) > [ 2.249763] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] > [ 2.249765] pnp 00:09: [mem 0xfed10000-0xfed17fff] > [ 2.249767] pnp 00:09: [mem 0xfed18000-0xfed18fff] > [ 2.249768] pnp 00:09: [mem 0xfed19000-0xfed19fff] > [ 2.249770] pnp 00:09: [mem 0xe0000000-0xefffffff] > [ 2.249771] pnp 00:09: [mem 0xfed20000-0xfed3ffff] > [ 2.249773] pnp 00:09: [mem 0xfed90000-0xfed93fff] > [ 2.249774] pnp 00:09: [mem 0xfed45000-0xfed8ffff] > [ 2.249775] pnp 00:09: [mem 0xff000000-0xffffffff] > [ 2.249777] pnp 00:09: [mem 0xfee00000-0xfeefffff] > [ 2.249779] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] > [ 2.249843] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been > reserved > [ 2.249921] system 00:09: [mem 0xfed10000-0xfed17fff] could not be > reserved > [ 2.249999] system 00:09: [mem 0xfed18000-0xfed18fff] has been > reserved > [ 2.250077] system 00:09: [mem 0xfed19000-0xfed19fff] has been > reserved > [ 2.250155] system 00:09: [mem 0xe0000000-0xefffffff] has been > reserved > [ 2.250232] system 00:09: [mem 0xfed20000-0xfed3ffff] has been > reserved > [ 2.250318] system 00:09: [mem 0xfed90000-0xfed93fff] has been > reserved > [ 2.250395] system 00:09: [mem 0xfed45000-0xfed8ffff] has been > reserved > [ 2.250473] system 00:09: [mem 0xff000000-0xffffffff] could not be > reserved > [ 2.250552] system 00:09: [mem 0xfee00000-0xfeefffff] could not be > reserved > [ 2.250630] system 00:09: Plug and Play ACPI device, IDs PNP0c02 > (active) > [ 2.250755] pnp 00:0a: [mem 0x20000000-0x201fffff] > [ 2.250757] pnp 00:0a: [mem 0x40000000-0x401fffff] > [ 2.250825] system 00:0a: [mem 0x20000000-0x201fffff] has been > reserved > [ 2.250903] system 00:0a: [mem 0x40000000-0x401fffff] has been > reserved > [ 2.250981] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 > (active) > [ 2.250988] pnp: PnP ACPI: found 11 devices > [ 2.251061] ACPI: ACPI bus type pnp unregistered > [ 2.259213] pci 0000:00:01.0: PCI bridge to [bus 01] > [ 2.259301] pci 0000:00:01.0: bridge window [mem > 0xa0800000-0xa08fffff] > [ 2.259381] pci 0000:00:01.1: PCI bridge to [bus 06-9c] > [ 2.259457] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff] > [ 2.259534] pci 0000:00:01.1: bridge window [mem > 0xa0a00000-0xa4efffff] > [ 2.259614] pci 0000:00:01.1: bridge window [mem > 0xa4f00000-0xa8efffff 64bit pref] > [ 2.259721] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 2.259799] pci 0000:00:1c.0: bridge window [mem > 0xa0700000-0xa07fffff] > [ 2.259878] pci 0000:00:1c.0: bridge window [mem > 0xa0400000-0xa04fffff 64bit pref] > [ 2.259987] pci 0000:00:1c.1: PCI bridge to [bus 03] > [ 2.260065] pci 0000:00:1c.1: bridge window [mem > 0xa0600000-0xa06fffff] > [ 2.260151] pci 0000:04:00.0: PCI bridge to [bus 05] > [ 2.260233] pci 0000:04:00.0: bridge window [mem > 0xa0500000-0xa05fffff] > [ 2.260332] pci 0000:00:1c.2: PCI bridge to [bus 04-05] > [ 2.260410] pci 0000:00:1c.2: bridge window [mem > 0xa0500000-0xa05fffff] > [ 2.260496] pci 0000:00:01.0: enabling device (0000 -> 0002) > [ 2.260607] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 2.260609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 2.260611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 2.260613] pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff] > [ 2.260614] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] > [ 2.260616] pci_bus 0000:01: resource 1 [mem 0xa0800000-0xa08fffff] > [ 2.260618] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] > [ 2.260619] pci_bus 0000:06: resource 1 [mem 0xa0a00000-0xa4efffff] > [ 2.260621] pci_bus 0000:06: resource 2 [mem 0xa4f00000-0xa8efffff > 64bit pref] > [ 2.260623] pci_bus 0000:02: resource 1 [mem 0xa0700000-0xa07fffff] > [ 2.260625] pci_bus 0000:02: resource 2 [mem 0xa0400000-0xa04fffff > 64bit pref] > [ 2.260627] pci_bus 0000:03: resource 1 [mem 0xa0600000-0xa06fffff] > [ 2.260629] pci_bus 0000:04: resource 1 [mem 0xa0500000-0xa05fffff] > [ 2.260630] pci_bus 0000:05: resource 1 [mem 0xa0500000-0xa05fffff] > [ 2.260655] NET: Registered protocol family 2 > [ 2.261300] TCP established hash table entries: 524288 (order: 11, > 8388608 bytes) > [ 2.262626] TCP bind hash table entries: 65536 (order: 8, 1048576 > bytes) > [ 2.262833] TCP: Hash tables configured (established 524288 bind > 65536) > [ 2.262923] TCP: reno registered > [ 2.263003] UDP hash table entries: 4096 (order: 5, 131072 bytes) > [ 2.263109] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > [ 2.263273] NET: Registered protocol family 1 > [ 2.263418] RPC: Registered named UNIX socket transport module. > [ 2.263495] RPC: Registered udp transport module. > [ 2.263569] RPC: Registered tcp transport module. > [ 2.263643] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 2.263736] pci 0000:00:02.0: Boot video device > [ 2.263760] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 > [ 2.263761] pci 0000:00:1a.0: Performing full reset > [ 2.263935] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 > [ 2.263936] pci 0000:00:1d.0: Performing full reset > [ 2.264160] PCI: CLS mismatch (256 != 64), using 64 bytes > [ 2.264200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 2.264294] software IO TLB [mem 0x86d29000-0x8ad28fff] (64MB) > mapped at [ffff880086d29000-ffff88008ad28fff] > [ 2.265018] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a > [ 2.265098] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a > [ 2.265179] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a > [ 2.265265] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a > [ 2.265396] microcode: Microcode Update Driver: v2.00 > , Peter Oruba > [ 2.265714] audit: initializing netlink socket (disabled) > [ 2.265795] type=2000 audit(1346084009.161:1): initialized > [ 2.286766] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 2.289578] VFS: Disk quotas dquot_6.5.2 > [ 2.289713] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 2.290644] NFS: Registering the id_resolver key type > [ 2.290727] Key type id_resolver registered > [ 2.290800] Key type id_legacy registered > [ 2.290937] msgmni has been set to 15790 > [ 2.291083] SELinux: Registering netfilter hooks > [ 2.291459] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 2.291565] io scheduler noop registered > [ 2.292133] io scheduler deadline registered > [ 2.292263] io scheduler cfq registered (default) > [ 2.292437] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X > [ 2.292547] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X > [ 2.292681] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X > [ 2.292803] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X > [ 2.292929] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X > [ 2.293077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 2.293344] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 2.293453] ACPI: Power Button [PWRB] > [ 2.293578] input: Sleep Button as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 > [ 2.293686] ACPI: Sleep Button [SLPB] > [ 2.293808] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 2.293914] ACPI: Power Button [PWRF] > [ 2.294084] ACPI: Requesting acpi_cpufreq > [ 2.296175] Monitor-Mwait will be used to enter C-1 state > [ 2.296203] Monitor-Mwait will be used to enter C-2 state > [ 2.296234] Monitor-Mwait will be used to enter C-3 state > [ 2.296249] ACPI: acpi_idle registered with cpuidle > [ 2.300198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 2.300895] Non-volatile memory driver v1.3 > [ 2.300971] Linux agpgart interface v0.103 > [ 2.301174] [drm] Initialized drm 1.1.0 20060810 > [ 2.302841] brd: module loaded > [ 2.303781] loop: module loaded > [ 2.304078] ata_piix 0000:00:1f.2: version 2.13 > [ 2.304092] ata_piix 0000:00:1f.2: MAP [ > [ 2.304165] P0 P2 P1 P3 ] > [ 2.455212] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 2.455616] scsi0 : ata_piix > [ 2.455862] scsi1 : ata_piix > [ 2.456073] ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x215c bmdma > 0x2060 irq 19 > [ 2.456164] ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x2158 bmdma > 0x2068 irq 19 > [ 2.456433] tg3.c:v3.124 (March 21, 2012) > [ 2.475283] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM957765) rev > 57785100] (PCI Express) MAC address 3c:07:54:6f:0e:4c > [ 2.475396] tg3 0000:02:00.0: eth0: attached PHY is 57765 > (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) > [ 2.475506] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] > MIirq[0] ASF[0] TSOcap[1] > [ 2.475612] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] > dma_mask[64-bit] > [ 2.475844] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > [ 2.475920] e100: Copyright(c) 1999-2006 Intel Corporation > [ 2.476031] e1000: Intel(R) PRO/1000 Network Driver - version > 7.3.21-k8-NAPI > [ 2.476109] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 2.476230] sky2: driver version 1.30 > [ 2.476537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.476615] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 > [ 2.476639] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 2.476642] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 2.476773] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned > bus number 1 > [ 2.476883] ehci_hcd 0000:00:1a.7: reset hcs_params 0x203206 dbg=2 > cc=3 pcc=2 ordered !ppc ports=6 > [ 2.476886] ehci_hcd 0000:00:1a.7: reset hcc_params 36881 caching > frame 1024 64 bit addr > [ 2.476896] ehci_hcd 0000:00:1a.7: support lpm > [ 2.476903] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 > ithresh=8 Periodic period=1024 Reset HALT > [ 2.480779] ehci_hcd 0000:00:1a.7: debug port 2 > [ 2.480859] ehci_hcd 0000:00:1a.7: cache line size of 64 is not > supported > [ 2.480860] ehci_hcd 0000:00:1a.7: supports USB remote wakeup > [ 2.480876] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xa0906c00 > [ 2.480954] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 > ithresh=1 period=1024 RUN > [ 2.486147] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > [ 2.486276] usb usb1: default language 0x0409 > [ 2.486281] usb usb1: udev 1, busnum 1, minor = 0 > [ 2.486283] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.486361] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.486466] usb usb1: Product: EHCI Host Controller > [ 2.486541] usb usb1: Manufacturer: Linux 3.6.0-rc3-next-20120824 > ehci_hcd > [ 2.486619] usb usb1: SerialNumber: 0000:00:1a.7 > [ 2.486781] usb usb1: usb_probe_device > [ 2.486784] usb usb1: configuration #1 chosen from 1 choice > [ 2.486790] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 2.486831] hub 1-0:1.0: usb_probe_interface > [ 2.486833] hub 1-0:1.0: usb_probe_interface - got id > [ 2.486835] hub 1-0:1.0: USB hub found > [ 2.486909] hub 1-0:1.0: 6 ports detected > [ 2.486983] hub 1-0:1.0: standalone hub > [ 2.486985] hub 1-0:1.0: no power switching (usb 1.0) > [ 2.486986] hub 1-0:1.0: individual port over-current protection > [ 2.486987] hub 1-0:1.0: power on to power good time: 20ms > [ 2.486990] hub 1-0:1.0: local power source is good > [ 2.486992] hub 1-0:1.0: trying to enable port power on > non-switchable hub > [ 2.487048] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.487051] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.487189] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 2 > [ 2.487299] ehci_hcd 0000:00:1d.7: reset hcs_params 0x204208 dbg=2 > cc=4 pcc=2 ordered !ppc ports=8 > [ 2.487302] ehci_hcd 0000:00:1d.7: reset hcc_params 36881 caching > frame 1024 64 bit addr > [ 2.487311] ehci_hcd 0000:00:1d.7: support lpm > [ 2.487316] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 > ithresh=8 Periodic period=1024 Reset HALT > [ 2.491211] ehci_hcd 0000:00:1d.7: debug port 2 > [ 2.491291] ehci_hcd 0000:00:1d.7: cache line size of 64 is not > supported > [ 2.491293] ehci_hcd 0000:00:1d.7: supports USB remote wakeup > [ 2.491304] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa0906800 > [ 2.491383] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 > ithresh=1 period=1024 RUN > [ 2.497144] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 2.497272] usb usb2: default language 0x0409 > [ 2.497277] usb usb2: udev 1, busnum 2, minor = 128 > [ 2.497279] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.497357] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.497461] usb usb2: Product: EHCI Host Controller > [ 2.497536] usb usb2: Manufacturer: Linux 3.6.0-rc3-next-20120824 > ehci_hcd > [ 2.497614] usb usb2: SerialNumber: 0000:00:1d.7 > [ 2.497769] usb usb2: usb_probe_device > [ 2.497771] usb usb2: configuration #1 chosen from 1 choice > [ 2.497777] usb usb2: adding 2-0:1.0 (config #1, interface 0) > [ 2.497816] hub 2-0:1.0: usb_probe_interface > [ 2.497817] hub 2-0:1.0: usb_probe_interface - got id > [ 2.497818] hub 2-0:1.0: USB hub found > [ 2.497893] hub 2-0:1.0: 8 ports detected > [ 2.497967] hub 2-0:1.0: standalone hub > [ 2.497968] hub 2-0:1.0: no power switching (usb 1.0) > [ 2.497969] hub 2-0:1.0: individual port over-current protection > [ 2.497970] hub 2-0:1.0: power on to power good time: 20ms > [ 2.497973] hub 2-0:1.0: local power source is good > [ 2.497975] hub 2-0:1.0: trying to enable port power on > non-switchable hub > [ 2.498049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.498136] ohci_hcd: block sizes: ed 80 td 96 > [ 2.498173] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.498271] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 2.498274] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 2.498402] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > bus number 3 > [ 2.498512] uhci_hcd 0000:00:1a.0: detected 2 ports > [ 2.498589] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = > 0x0000 > [ 2.498590] uhci_hcd 0000:00:1a.0: Performing full reset > [ 2.498616] uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002120 > [ 2.498714] usb usb3: default language 0x0409 > [ 2.498719] usb usb3: udev 1, busnum 3, minor = 256 > [ 2.498721] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 2.498799] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.498903] usb usb3: Product: UHCI Host Controller > [ 2.498978] usb usb3: Manufacturer: Linux 3.6.0-rc3-next-20120824 > uhci_hcd > [ 2.499056] usb usb3: SerialNumber: 0000:00:1a.0 > [ 2.499208] usb usb3: usb_probe_device > [ 2.499210] usb usb3: configuration #1 chosen from 1 choice > [ 2.499215] usb usb3: adding 3-0:1.0 (config #1, interface 0) > [ 2.499254] hub 3-0:1.0: usb_probe_interface > [ 2.499256] hub 3-0:1.0: usb_probe_interface - got id > [ 2.499257] hub 3-0:1.0: USB hub found > [ 2.499332] hub 3-0:1.0: 2 ports detected > [ 2.499406] hub 3-0:1.0: standalone hub > [ 2.499407] hub 3-0:1.0: no power switching (usb 1.0) > [ 2.499408] hub 3-0:1.0: individual port over-current protection > [ 2.499410] hub 3-0:1.0: power on to power good time: 2ms > [ 2.499412] hub 3-0:1.0: local power source is good > [ 2.499414] hub 3-0:1.0: trying to enable port power on > non-switchable hub > [ 2.499437] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 > [ 2.499454] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.499457] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.499582] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 4 > [ 2.499692] uhci_hcd 0000:00:1d.0: detected 2 ports > [ 2.499769] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = > 0x0000 > [ 2.499770] uhci_hcd 0000:00:1d.0: Performing full reset > [ 2.499787] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0 > [ 2.499883] usb usb4: default language 0x0409 > [ 2.499887] usb usb4: udev 1, busnum 4, minor = 384 > [ 2.499889] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 2.499967] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.500072] usb usb4: Product: UHCI Host Controller > [ 2.500166] usb usb4: Manufacturer: Linux 3.6.0-rc3-next-20120824 > uhci_hcd > [ 2.500245] usb usb4: SerialNumber: 0000:00:1d.0 > [ 2.500388] usb usb4: usb_probe_device > [ 2.500390] usb usb4: configuration #1 chosen from 1 choice > [ 2.500394] usb usb4: adding 4-0:1.0 (config #1, interface 0) > [ 2.500432] hub 4-0:1.0: usb_probe_interface > [ 2.500433] hub 4-0:1.0: usb_probe_interface - got id > [ 2.500435] hub 4-0:1.0: USB hub found > [ 2.500510] hub 4-0:1.0: 2 ports detected > [ 2.500583] hub 4-0:1.0: standalone hub > [ 2.500584] hub 4-0:1.0: no power switching (usb 1.0) > [ 2.500586] hub 4-0:1.0: individual port over-current protection > [ 2.500587] hub 4-0:1.0: power on to power good time: 2ms > [ 2.500590] hub 4-0:1.0: local power source is good > [ 2.500591] hub 4-0:1.0: trying to enable port power on > non-switchable hub > [ 2.500616] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 > [ 2.500653] Initializing USB Mass Storage driver... > [ 2.500772] usbcore: registered new interface driver usb-storage > [ 2.500848] USB Mass Storage support registered. > [ 2.500966] usbcore: registered new interface driver libusual > [ 2.501178] i8042: PNP: No PS/2 controller found. Probing ports > directly. > [ 2.502142] i8042: No controller found > [ 2.502267] mousedev: PS/2 mouse device common for all mice > [ 2.502588] rtc_cmos 00:06: RTC can wake from S4 > [ 2.502798] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 2.502901] rtc0: alarms up to one month, y3k, 242 bytes nvram, > hpet irqs > [ 2.503124] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) > initialised: dm-devel@redhat.com > [ 2.503331] cpuidle: using governor ladder > [ 2.503470] cpuidle: using governor menu > [ 2.503544] EFI Variables Facility v0.08 2004-May-17 > [ 2.504494] usbcore: registered new interface driver usbhid > [ 2.504570] usbhid: USB HID core driver > [ 2.505257] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X > [ 2.586181] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 > 0 ACK POWER sig=j CSC CONNECT > [ 2.586198] hub 1-0:1.0: port 1: status 0501 change 0001 > [ 2.597173] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 > 0 ACK POWER sig=j CSC CONNECT > [ 2.597189] hub 2-0:1.0: port 1: status 0501 change 0001 > [ 2.599139] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 > [ 2.600131] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 > [ 2.686150] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 > [ 2.686187] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > [ 2.737352] ehci_hcd 0000:00:1a.7: port 1 reset complete, port enabled > [ 2.737358] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 > 0 ACK POWER sig=se0 PE CONNECT > [ 2.788081] usb 1-1: new high-speed USB device number 2 using ehci_hcd > [ 2.839297] ehci_hcd 0000:00:1a.7: port 1 reset complete, port enabled > [ 2.839304] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 > 0 ACK POWER sig=se0 PE CONNECT > [ 2.902223] ehci_hcd 0000:00:1a.7: set dev address 2 for port 1 > [ 2.902235] ehci_hcd 0000:00:1a.7: LPM: no device attached > [ 2.902596] usb 1-1: udev 2, busnum 1, minor = 1 > [ 2.902606] usb 1-1: New USB device found, idVendor=0424, > idProduct=2513 > [ 2.902710] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 2.903108] usb 1-1: usb_probe_device > [ 2.903112] usb 1-1: configuration #1 chosen from 1 choice > [ 2.903374] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > [ 2.903623] hub 1-1:1.0: usb_probe_interface > [ 2.903626] hub 1-1:1.0: usb_probe_interface - got id > [ 2.903628] hub 1-1:1.0: USB hub found > [ 2.903834] hub 1-1:1.0: 3 ports detected > [ 2.903953] hub 1-1:1.0: compound device; port removable status: FRR > [ 2.903955] hub 1-1:1.0: individual port power switching > [ 2.903956] hub 1-1:1.0: individual port over-current protection > [ 2.904125] hub 1-1:1.0: TT per port > [ 2.904128] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) > [ 2.904130] hub 1-1:1.0: power on to power good time: 100ms > [ 2.904424] hub 1-1:1.0: local power source is good > [ 2.904430] hub 1-1:1.0: enabling power on all ports > [ 2.904805] hub 2-0:1.0: state 7 ports 8 chg 0002 evt 0000 > [ 2.904818] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > [ 2.955112] ehci_hcd 0000:00:1d.7: port 1 reset complete, port enabled > [ 2.955119] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 > 0 ACK POWER sig=se0 PE CONNECT > [ 3.004169] hub 1-1:1.0: port 1: status 0101 change 0001 > [ 3.005952] usb 2-1: new high-speed USB device number 2 using ehci_hcd > [ 3.026624] Netfilter messages via NETLINK v0.30. > [ 3.026711] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 3.026941] ctnetlink v0.93: registering with nfnetlink. > [ 3.027111] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 3.027211] TCP: cubic registered > [ 3.027283] Initializing XFRM netlink socket > [ 3.027555] NET: Registered protocol family 10 > [ 3.027765] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 3.027874] sit: IPv6 over IPv4 tunneling driver > [ 3.028140] NET: Registered protocol family 17 > [ 3.028230] Key type dns_resolver registered > [ 3.028744] PM: Hibernation image not present or could not be loaded. > [ 3.028753] registered taskstats version 1 > [ 3.029428] Magic number: 8:905:237 > [ 3.029546] console [netcon0] enabled > [ 3.029618] netconsole: network logging started > [ 3.030266] ALSA device list: > [ 3.030338] #0: HDA Intel PCH at 0xa0900000 irq 45 > [ 3.057058] ehci_hcd 0000:00:1d.7: port 1 reset complete, port enabled > [ 3.057063] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 > 0 ACK POWER sig=se0 PE CONNECT > [ 3.103927] usb 1-1: link qh256-0001/ffff8802650cf600 start 1 [1/0 us] > [ 3.120112] ehci_hcd 0000:00:1d.7: set dev address 2 for port 1 > [ 3.120124] ehci_hcd 0000:00:1d.7: LPM: no device attached > [ 3.120439] usb 2-1: udev 2, busnum 2, minor = 129 > [ 3.120448] usb 2-1: New USB device found, idVendor=0424, > idProduct=2513 > [ 3.120543] usb 2-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 3.120919] usb 2-1: usb_probe_device > [ 3.120923] usb 2-1: configuration #1 chosen from 1 choice > [ 3.121120] usb 2-1: adding 2-1:1.0 (config #1, interface 0) > [ 3.121351] hub 2-1:1.0: usb_probe_interface > [ 3.121354] hub 2-1:1.0: usb_probe_interface - got id > [ 3.121356] hub 2-1:1.0: USB hub found > [ 3.121596] hub 2-1:1.0: 3 ports detected > [ 3.121704] hub 2-1:1.0: compound device; port removable status: FRR > [ 3.121705] hub 2-1:1.0: individual port power switching > [ 3.121707] hub 2-1:1.0: individual port over-current protection > [ 3.121895] hub 2-1:1.0: TT per port > [ 3.121898] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) > [ 3.121900] hub 2-1:1.0: power on to power good time: 100ms > [ 3.122221] hub 2-1:1.0: local power source is good > [ 3.122231] hub 2-1:1.0: enabling power on all ports > [ 3.122639] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 3.122648] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 3.122655] hub 1-1:1.0: state 7 ports 3 chg 0002 evt 0000 > [ 3.122850] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s > [ 3.134100] hub 1-1:1.0: port 1 not reset yet, waiting 10ms > [ 3.196073] usb 1-1.1: new full-speed USB device number 3 using > ehci_hcd > [ 3.207064] hub 1-1:1.0: port 1 not reset yet, waiting 10ms > [ 3.222056] hub 2-1:1.0: port 1: status 0301 change 0001 > [ 3.222295] hub 2-1:1.0: port 2: status 0301 change 0001 > [ 3.222545] hub 2-1:1.0: port 3: status 0101 change 0001 > [ 3.266842] tsc: Refined TSC clocksource calibration: 2294.786 MHz > [ 3.266946] Switching to clocksource tsc > [ 3.280798] usb 1-1.1: ep0 maxpacket = 8 > [ 3.282521] usb 1-1.1: default language 0x0409 > [ 3.283021] usb 1-1.1: udev 3, busnum 1, minor = 2 > [ 3.283031] usb 1-1.1: New USB device found, idVendor=0a5c, > idProduct=4500 > [ 3.283144] usb 1-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.283248] usb 1-1.1: Product: BRCM20702 Hub > [ 3.283318] usb 1-1.1: Manufacturer: Apple Inc. > [ 3.283673] usb 1-1.1: usb_probe_device > [ 3.283677] usb 1-1.1: configuration #1 chosen from 1 choice > [ 3.283907] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) > [ 3.284113] hub 1-1.1:1.0: usb_probe_interface > [ 3.284116] hub 1-1.1:1.0: usb_probe_interface - got id > [ 3.284118] hub 1-1.1:1.0: USB hub found > [ 3.284384] hub 1-1.1:1.0: 3 ports detected > [ 3.284494] hub 1-1.1:1.0: compound device; port removable status: FFF > [ 3.284495] hub 1-1.1:1.0: ganged power switching > [ 3.284496] hub 1-1.1:1.0: global over-current protection > [ 3.284498] hub 1-1.1:1.0: power on to power good time: 100ms > [ 3.285035] hub 1-1.1:1.0: local power source is good > [ 3.285043] hub 1-1.1:1.0: no over-current condition exists > [ 3.285049] hub 1-1.1:1.0: enabling power on all ports > [ 3.285530] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0002 > [ 3.321803] usb 2-1: link qh256-0001/ffff8802650cf780 start 1 [1/0 us] > [ 3.321869] hub 2-1:1.0: state 7 ports 3 chg 000e evt 0000 > [ 3.322000] hub 2-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s > [ 3.332994] hub 2-1:1.0: port 1 not reset yet, waiting 10ms > [ 3.384967] hub 1-1.1:1.0: port 1: status 0101 change 0001 > [ 3.385468] hub 1-1.1:1.0: port 2: status 0101 change 0001 > [ 3.385969] hub 1-1.1:1.0: port 3: status 0101 change 0001 > [ 3.394976] usb 2-1.1: new low-speed USB device number 3 using > ehci_hcd > [ 3.406958] hub 2-1:1.0: port 1 not reset yet, waiting 10ms > [ 3.484225] usb 2-1.1: skipped 1 descriptor after interface > [ 3.484672] usb 2-1.1: default language 0x0409 > [ 3.485688] usb 1-1.1: link qh128-0601/ffff8802650cf880 start 2 > [1/2 us] > [ 3.487212] usb 2-1.1: udev 3, busnum 2, minor = 130 > [ 3.487223] usb 2-1.1: New USB device found, idVendor=05ac, > idProduct=8242 > [ 3.487325] usb 2-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.487428] usb 2-1.1: Product: IR Receiver > [ 3.487502] usb 2-1.1: Manufacturer: Apple Computer, Inc. > [ 3.487833] usb 2-1.1: usb_probe_device > [ 3.487836] usb 2-1.1: configuration #1 chosen from 1 choice > [ 3.489715] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0) > [ 3.489964] usbhid 2-1.1:1.0: usb_probe_interface > [ 3.489968] usbhid 2-1.1:1.0: usb_probe_interface - got id > [ 3.494139] usbhid 2-1.1:1.0: looking for a minor, starting at 96 > [ 3.494495] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID > v1.11 Device [Apple Computer, Inc. IR Receiver] on > usb-0000:00:1d.7-1.1/input0 > [ 3.494729] hub 2-1:1.0: port 2, status 0301, change 0000, 1.5 Mb/s > [ 3.505776] hub 2-1:1.0: port 2 not reset yet, waiting 10ms > [ 3.567714] usb 2-1.2: new low-speed USB device number 4 using > ehci_hcd > [ 3.580865] hub 2-1:1.0: port 2 not reset yet, waiting 10ms > [ 3.666301] usb 2-1.2: skipped 1 descriptor after interface > [ 3.666312] usb 2-1.2: skipped 1 descriptor after interface > [ 3.667199] usb 2-1.2: default language 0x0409 > [ 3.676757] usb 2-1.2: udev 4, busnum 2, minor = 131 > [ 3.676768] usb 2-1.2: New USB device found, idVendor=045e, > idProduct=00db > [ 3.676868] usb 2-1.2: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.676972] usb 2-1.2: Product: Natural® Ergonomic Keyboard 4000 > [ 3.677049] usb 2-1.2: Manufacturer: Microsoft > [ 3.677422] usb 2-1.2: usb_probe_device > [ 3.677426] usb 2-1.2: configuration #1 chosen from 1 choice > [ 3.678110] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0) > [ 3.678334] usbhid 2-1.2:1.0: usb_probe_interface > [ 3.678337] usbhid 2-1.2:1.0: usb_probe_interface - got id > [ 3.685822] input: Microsoft Natural® Ergonomic Keyboard 4000 as > /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 > [ 3.685943] usb 2-1.2: link qh8-0601/ffff8802650cfb80 start 2 [1/2 us] > [ 3.686145] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID > v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on > usb-0000:00:1d.7-1.2/input0 > [ 3.686274] usb 2-1.2: adding 2-1.2:1.1 (config #1, interface 1) > [ 3.686334] usbhid 2-1.2:1.1: usb_probe_interface > [ 3.686336] usbhid 2-1.2:1.1: usb_probe_interface - got id > [ 3.697654] input: Microsoft Natural® Ergonomic Keyboard 4000 as > /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.1/input/input4 > [ 3.697778] usb 2-1.2: link qh8-0601/ffff8802650cfc80 start 3 [1/2 us] > [ 3.698205] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID > v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on > usb-0000:00:1d.7-1.2/input1 > [ 3.698519] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s > [ 3.709798] hub 2-1:1.0: port 3 not reset yet, waiting 10ms > [ 3.767546] ata2.01: failed to resume link (SControl 0) > [ 3.779208] ata2.00: SATA link down (SStatus 0 SControl 300) > [ 3.779291] ata2.01: SATA link down (SStatus 0 SControl 0) > [ 3.779376] usb 2-1.3: new full-speed USB device number 5 using > ehci_hcd > [ 3.779396] ata1.01: failed to resume link (SControl 0) > [ 3.790757] hub 2-1:1.0: port 3 not reset yet, waiting 10ms > [ 3.806519] usb usb3: suspend_rh (auto-stop) > [ 3.806556] usb usb4: suspend_rh (auto-stop) > [ 3.864502] usb 2-1.3: ep0 maxpacket = 8 > [ 3.866873] usb 2-1.3: skipped 1 descriptor after interface > [ 3.866884] usb 2-1.3: skipped 1 descriptor after interface > [ 3.867084] usb 2-1.3: default language 0x0409 > [ 3.867992] usb 2-1.3: udev 5, busnum 2, minor = 132 > [ 3.868002] usb 2-1.3: New USB device found, idVendor=046d, > idProduct=c245 > [ 3.868111] usb 2-1.3: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.868214] usb 2-1.3: Product: Gaming Mouse G400 > [ 3.868792] usb 2-1.3: Manufacturer: Logitech > [ 3.869109] usb 2-1.3: usb_probe_device > [ 3.869112] usb 2-1.3: configuration #1 chosen from 1 choice > [ 3.869780] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0) > [ 3.869954] usbhid 2-1.3:1.0: usb_probe_interface > [ 3.869955] usbhid 2-1.3:1.0: usb_probe_interface - got id > [ 3.871376] input: Logitech Gaming Mouse G400 as > /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input5 > [ 3.871920] hid-generic 0003:046D:C245.0004: input,hidraw3: USB HID > v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1d.7-1.3/input0 > [ 3.872047] usb 2-1.3: adding 2-1.3:1.1 (config #1, interface 1) > [ 3.872101] usbhid 2-1.3:1.1: usb_probe_interface > [ 3.872103] usbhid 2-1.3:1.1: usb_probe_interface - got id > [ 3.873705] usbhid 2-1.3:1.1: looking for a minor, starting at 96 > [ 3.874106] hid-generic 0003:046D:C245.0005: hiddev0,hidraw4: USB > HID v1.10 Device [Logitech Gaming Mouse G400] on > usb-0000:00:1d.7-1.3/input1 > [ 3.874239] hub 1-1.1:1.0: state 7 ports 3 chg 000e evt 0000 > [ 3.874403] hub 1-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s > [ 3.930629] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 3.930723] ata1.01: SATA link down (SStatus 0 SControl 0) > [ 3.934157] ata1.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133 > [ 3.934266] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth > 0/32) > [ 3.936547] usb 1-1.1.1: new full-speed USB device number 4 using > ehci_hcd > [ 3.954145] ata1.00: configured for UDMA/133 > [ 3.954441] scsi 0:0:0:0: Direct-Access ATA INTEL > SSDSC2CT12 300i PQ: 0 ANSI: 5 > [ 3.955233] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: > (120 GB/111 GiB) > [ 3.955381] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 3.955396] sd 0:0:0:0: [sda] Write Protect is off > [ 3.955397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10 > [ 3.955409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, supports DPO and FUA > [ 3.957034] sda: sda1 sda2 sda3 sda4 > [ 3.957520] sd 0:0:0:0: [sda] Attached SCSI disk > [ 3.957647] md: Waiting for all devices to be available before > autodetect > [ 3.957766] md: If you don't use raid, use raid=noautodetect > [ 3.958021] md: Autodetecting RAID arrays. > [ 3.958133] md: Scanned 0 and added 0 devices. > [ 3.958244] md: autorun ... > [ 3.958353] md: ... autorun DONE. > [ 3.958829] EXT4-fs (sda4): couldn't mount as ext3 due to feature > incompatibilities > [ 3.959174] EXT4-fs (sda4): couldn't mount as ext2 due to feature > incompatibilities > [ 3.962387] EXT4-fs (sda4): mounted filesystem with ordered data > mode. Opts: (null) > [ 3.962539] VFS: Mounted root (ext4 filesystem) readonly on device > 8:4. > [ 3.963506] Freeing unused kernel memory: 600k freed > [ 3.963687] Write protecting the kernel read-only data: 12288k > [ 3.966849] Freeing unused kernel memory: 1120k freed > [ 3.971946] Freeing unused kernel memory: 1908k freed > [ 4.010363] usb 1-1.1.1: ep0 maxpacket = 8 > [ 4.013335] usb 1-1.1.1: skipped 1 descriptor after interface > [ 4.013412] usb 1-1.1.1: udev 4, busnum 1, minor = 3 > [ 4.013462] usb 1-1.1.1: New USB device found, idVendor=05ac, > idProduct=820a > [ 4.013575] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 4.013902] usb 1-1.1.1: usb_probe_device > [ 4.013950] usb 1-1.1.1: configuration #1 chosen from 1 choice > [ 4.014102] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0) > [ 4.014297] usbhid 1-1.1.1:1.0: usb_probe_interface > [ 4.014404] usbhid 1-1.1.1:1.0: usb_probe_interface - got id > [ 4.015734] input: HID 05ac:820a as > /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6 > [ 4.015890] usb 1-1.1.1: link qh8-0601/ffff8802650cfb00 start 3 > [1/2 us] > [ 4.016064] hid-generic 0003:05AC:820A.0006: input,hidraw5: USB HID > v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0 > [ 4.016606] hub 1-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s > [ 4.030312] kbd_mode (1031) used greatest stack depth: 5280 bytes left > [ 4.036584] loadkeys (1032) used greatest stack depth: 5120 bytes left > [ 4.036878] init-early.sh (1024) used greatest stack depth: 4728 > bytes left > [ 4.078435] usb 1-1.1.2: new full-speed USB device number 5 using > ehci_hcd > [ 4.152281] usb 1-1.1.2: ep0 maxpacket = 8 > [ 4.154884] usb 1-1.1.2: skipped 1 descriptor after interface > [ 4.154945] usb 1-1.1.2: udev 5, busnum 1, minor = 4 > [ 4.155003] usb 1-1.1.2: New USB device found, idVendor=05ac, > idProduct=820b > [ 4.155119] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 4.155414] usb 1-1.1.2: usb_probe_device > [ 4.155455] usb 1-1.1.2: configuration #1 chosen from 1 choice > [ 4.155643] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0) > [ 4.155829] usbhid 1-1.1.2:1.0: usb_probe_interface > [ 4.155870] usbhid 1-1.1.2:1.0: usb_probe_interface - got id > [ 4.157461] input: HID 05ac:820b as > /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7 > [ 4.157851] hid-generic 0003:05AC:820B.0007: input,hidraw6: USB HID > v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0 > [ 4.158256] hub 1-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s > [ 4.220347] usb 1-1.1.3: new full-speed USB device number 6 using > ehci_hcd > [ 4.269619] systemd-udevd[1139]: starting version 189 > [ 4.269915] start-stop-daem (1137) used greatest stack depth: 4328 > bytes left > [ 4.296678] usb 1-1.1.3: skipped 1 descriptor after interface > [ 4.296922] usb 1-1.1.3: default language 0x0409 > [ 4.297434] usb 1-1.1.3: udev 6, busnum 1, minor = 5 > [ 4.297439] usb 1-1.1.3: New USB device found, idVendor=05ac, > idProduct=8281 > [ 4.297442] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 4.297445] usb 1-1.1.3: Product: Bluetooth USB Host Controller > [ 4.297448] usb 1-1.1.3: Manufacturer: Apple Inc. > [ 4.297593] usb 1-1.1.3: usb_probe_device > [ 4.297597] usb 1-1.1.3: configuration #1 chosen from 1 choice > [ 4.297691] usb 1-1.1.3: adding 1-1.1.3:1.0 (config #1, interface 0) > [ 4.297750] usb 1-1.1.3: adding 1-1.1.3:1.1 (config #1, interface 1) > [ 4.297779] usb 1-1.1.3: adding 1-1.1.3:1.2 (config #1, interface 2) > [ 4.297806] usb 1-1.1.3: adding 1-1.1.3:1.3 (config #1, interface 3) > [ 4.297833] hub 2-1:1.0: state 7 ports 3 chg 0000 evt 0008 > [ 4.297926] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0008 > [ 4.314332] bcma: bus0: Found chip with id 0x4331, rev 0x02 and > package 0x09 > [ 4.314367] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id > 0x800, rev 0x25, class 0x0) > [ 4.314393] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id > 0x812, rev 0x1D, class 0x0) > [ 4.314442] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, > rev 0x13, class 0x0) > [ 4.316581] pci 0000:00:00.0: Intel Sandybridge Chipset > [ 4.316689] pci 0000:00:00.0: detected gtt size: 2097152K total, > 262144K mappable > [ 4.317734] pci 0000:00:00.0: detected 65536K stolen memory > [ 4.317796] i915 0000:00:02.0: setting latency timer to 64 > [ 4.364945] bcma: bus0: Bus registered > [ 4.396878] i915 0000:00:02.0: irq 46 for MSI/MSI-X > [ 4.396890] [drm] Supports vblank timestamp caching Rev 1 > (10.10.2010). > [ 4.396891] [drm] Driver supports precise vblank timestamp query. > [ 4.396975] vgaarb: device changed decodes: > PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 4.401954] b43-phy0: Broadcom 4331 WLAN found (core revision 29) > [ 4.402409] b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1 > [ 4.402745] Broadcom 43xx driver loaded [ Features: PNL ] > [ 4.444000] ieee80211 phy0: Selected rate control algorithm > 'minstrel_ht' > [ 4.444475] Registered led device: b43-phy0::tx > [ 4.444583] Registered led device: b43-phy0::rx > [ 4.444687] Registered led device: b43-phy0::radio > [ 4.452710] Bluetooth: Core ver 2.16 > [ 4.452726] NET: Registered protocol family 31 > [ 4.452727] Bluetooth: HCI device and connection manager initialized > [ 4.452735] Bluetooth: HCI socket layer initialized > [ 4.452739] Bluetooth: L2CAP socket layer initialized > [ 4.452746] Bluetooth: SCO socket layer initialized > [ 4.453955] btusb 1-1.1.3:1.0: usb_probe_interface > [ 4.453960] btusb 1-1.1.3:1.0: usb_probe_interface - got id > [ 4.454152] btusb 1-1.1.3:1.2: usb_probe_interface > [ 4.454155] btusb 1-1.1.3:1.2: usb_probe_interface - got id > [ 4.454164] btusb 1-1.1.3:1.3: usb_probe_interface > [ 4.454167] btusb 1-1.1.3:1.3: usb_probe_interface - got id > [ 4.454185] usbcore: registered new interface driver btusb > [ 4.454373] usb 1-1.1.3: link qh1-3008/ffff88026362e500 start 0 > [1/2 us] > [ 4.475260] usb 1-1.1.1: unlink qh8-0601/ffff8802650cfb00 start 3 > [1/2 us] > [ 4.488133] ehci_hcd 0000:00:1a.7: reused qh ffff8802650cfb00 schedule > [ 4.488145] usb 1-1.1.1: link qh8-0601/ffff8802650cfb00 start 3 > [1/2 us] > [ 4.489146] [drm:intel_disable_transcoder] *ERROR* failed to > disable transcoder 1 > [ 4.507214] usb 1-1.1.1: unlink qh8-0601/ffff8802650cfb00 start 3 > [1/2 us] > [ 4.522768] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off > [ 4.530220] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0006 > [ 4.530751] hub 1-1.1:1.0: port 1, status 0100, change 0001, 12 Mb/s > [ 4.530761] usb 1-1.1.1: USB disconnect, device number 4 > [ 4.530766] usb 1-1.1.1: unregistering device > [ 4.530771] usb 1-1.1.1: unregistering interface 1-1.1.1:1.0 > [ 4.556329] usb 1-1.1.1: usb_disable_device nuking all URBs > [ 4.614105] [drm] GMBUS [i915 gmbus vga] timed out, falling back to > bit banging on pin 2 > [ 4.669136] hub 1-1.1:1.0: debounce: port 1: total 100ms stable > 100ms status 0x100 > [ 4.669384] hub 1-1.1:1.0: port 2, status 0100, change 0001, 12 Mb/s > [ 4.669388] usb 1-1.1.2: USB disconnect, device number 5 > [ 4.669389] usb 1-1.1.2: unregistering device > [ 4.669392] usb 1-1.1.2: unregistering interface 1-1.1.2:1.0 > [ 4.713270] usb 1-1.1.2: usb_disable_device nuking all URBs > [ 4.815542] fbcon: inteldrmfb (fb0) is primary device > [ 4.817230] hub 1-1.1:1.0: debounce: port 2: total 100ms stable > 100ms status 0x100 > [ 4.817237] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0000 > [ 3.955741] ACPI: Invalid Power Resource to register! > [ 5.138954] Console: switching to colour frame buffer device 240x67 > [ 5.143838] fb0: inteldrmfb frame buffer device > [ 5.143839] drm: registered panic notifier > [ 5.144679] ACPI: Video Device [IGPU] (multi-head: yes rom: no > post: no) > [ 5.144721] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 > [ 5.144821] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 > on minor 0 > [ 5.144853] ACPI Warning: 0x000000000000efa0-0x000000000000efbf > SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 > (20120711/utaddress-251) > [ 5.144859] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > [ 5.150594] systemd-udevd (1150) used greatest stack depth: 3296 > bytes left > [ 5.777001] vboxdrv: Found 4 processor cores. > [ 5.777182] vboxdrv: fAsync=0 offMin=0x20f offMax=0x126b > [ 5.777227] vboxdrv: TSC mode is 'synchronous', kernel timer mode > is 'normal'. > [ 5.777229] vboxdrv: Successfully loaded version 4.1.20 (interface > 0x00190000). > [ 5.838256] EXT4-fs (sda4): re-mounted. Opts: discard > [ 6.468583] usb 2-1.3: link qh1-0601/ffff880265c25e80 start 0 [1/2 us] > [ 6.498242] tg3 0000:02:00.0: irq 47 for MSI/MSI-X > [ 6.498248] tg3 0000:02:00.0: irq 48 for MSI/MSI-X > [ 6.498253] tg3 0000:02:00.0: irq 49 for MSI/MSI-X > [ 6.498258] tg3 0000:02:00.0: irq 50 for MSI/MSI-X > [ 6.498263] tg3 0000:02:00.0: irq 51 for MSI/MSI-X > [ 6.793668] usb 1-1.1.3: unlink qh1-3008/ffff88026362e500 start 0 > [1/2 us] > [ 6.793689] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 6.895972] usb 1-1: clear tt buffer port 1, a6 ep2 t04048d82 > [ 6.945967] b43-phy0: Loading firmware version 666.2 (2011-02-23 > 01:15:07) > [ 6.985379] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 10.213293] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full > duplex > [ 10.213297] tg3 0000:02:00.0: eth0: Flow control is off for TX and > off for RX > [ 10.213298] tg3 0000:02:00.0: eth0: EEE is disabled > [ 10.214309] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 11.035530] sd 0:0:0:0: [sda] > [ 11.035533] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE > [ 11.035535] sd 0:0:0:0: [sda] > [ 11.035536] Sense Key : Illegal Request [current] > [ 11.035539] sd 0:0:0:0: [sda] > [ 11.035541] Add. Sense: Invalid field in cdb > [ 11.035543] sd 0:0:0:0: [sda] CDB: > [ 11.035544] Write(10): 2a 08 0b ad d1 78 00 00 08 00 > [ 11.035550] end_request: critical target error, dev sda, sector > 195940728 > [ 11.035552] end_request: critical target error, dev sda, sector > 195940728 > [ 11.035557] Aborting journal on device sda4-8. > [ 11.046413] EXT4-fs error (device sda4): ext4_journal_start_sb:348: > Detected aborted journal > [ 11.046418] EXT4-fs (sda4): Remounting filesystem read-only > [ 18.737844] tty_init_dev: 26 callbacks suppressed > I believe the problem is in SCSI. Mode sense command catches my attention: [ 3.955397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10 All logs from older kernels has different mode page code: 00 3a 00 00 sg_modes from broken kernel shows DPOFUA set, which is 0x10th bit. Anyone knowing SCSI better could tell if that might cause the problems? # From broken kernel: $ sudo sg_modes --all /dev/sda ATA INTEL SSDSC2CT12 300i peripheral_type: disk [0x0] Mode parameter header from MODE SENSE(10): Mode data length=60, medium type=0x00, WP=0, DpoFua=1, longlba=0 Block descriptor length=8 > Direct access device block descriptors: Density code=0x0 00 00 00 00 00 00 00 02 00 >> Read-Write error recovery, page_control: current 00 01 0a 80 00 00 00 00 00 00 00 00 00 >> Caching, page_control: current 00 08 12 04 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 >> Control, page_control: current 00 0a 0a 02 00 00 00 00 00 ff ff 00 1e # From good kernel: $ sudo sg_modes --all /dev/sda ATA INTEL SSDSC2CT12 300i peripheral_type: disk [0x0] Mode parameter header from MODE SENSE(10): Mode data length=60, medium type=0x00, WP=0, DpoFua=0, longlba=0 Block descriptor length=8 > Direct access device block descriptors: Density code=0x0 00 00 00 00 00 00 00 02 00 >> Read-Write error recovery, page_control: current 00 01 0a 80 00 00 00 00 00 00 00 00 00 >> Caching, page_control: current 00 08 12 04 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 >> Control, page_control: current 00 0a 0a 02 00 00 00 00 00 ff ff 00 1e -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/