Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752197Ab2H3TmH (ORCPT ); Thu, 30 Aug 2012 15:42:07 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:35714 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751105Ab2H3TmE (ORCPT ); Thu, 30 Aug 2012 15:42:04 -0400 Message-ID: <503FC209.8010802@kernel.org> Date: Thu, 30 Aug 2012 20:42:01 +0100 From: Jonathan Cameron User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:14.0) Gecko/20120717 Thunderbird/14.0 MIME-Version: 1.0 To: "Patil, Rachna" CC: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, Dmitry Torokhov , Dmitry Torokhov , Jonathan Cameron , Samuel Ortiz Subject: Re: [PATCH v2 4/5] IIO : ADC: tiadc: Add support of TI's ADC driver References: <1346312306-21082-1-git-send-email-rachna@ti.com> <1346312306-21082-5-git-send-email-rachna@ti.com> In-Reply-To: <1346312306-21082-5-git-send-email-rachna@ti.com> X-Enigmail-Version: 1.4.3 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12330 Lines: 416 On 08/30/2012 08:38 AM, Patil, Rachna wrote: > This patch adds support for TI's ADC driver. > This is a multifunctional device. > Analog input lines are provided on which > voltage measurements can be carried out. > You can have upto 8 input lines. > Nice concise driver. A few comments and questions inline. Nothing significant really though... Half of them are me wanting to improve my understanding of what is going on (and not have to remember it in the future ;) > Signed-off-by: Patil, Rachna > --- > Changes in v2: > Addressed review comments from Matthias Kaehlcke > > drivers/iio/adc/Kconfig | 7 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/ti_adc.c | 216 ++++++++++++++++++++++++++++++++++ > drivers/mfd/ti_tscadc.c | 18 +++- > include/linux/mfd/ti_tscadc.h | 9 ++- > include/linux/platform_data/ti_adc.h | 14 ++ > 6 files changed, 263 insertions(+), 2 deletions(-) > create mode 100644 drivers/iio/adc/ti_adc.c > create mode 100644 include/linux/platform_data/ti_adc.h > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 8a78b4f..ad32df8 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -22,4 +22,11 @@ config AT91_ADC > help > Say yes here to build support for Atmel AT91 ADC. > > +config TI_ADC > + tristate "TI's ADC driver" > + depends on ARCH_OMAP2PLUS > + help > + Say yes here to build support for Texas Instruments ADC > + driver which is also a MFD client. > + > endmenu > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 52eec25..a930cee 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -4,3 +4,4 @@ > > obj-$(CONFIG_AD7266) += ad7266.o > obj-$(CONFIG_AT91_ADC) += at91_adc.o > +obj-$(CONFIG_TI_ADC) += ti_adc.o > diff --git a/drivers/iio/adc/ti_adc.c b/drivers/iio/adc/ti_adc.c > new file mode 100644 > index 0000000..d2e621c > --- /dev/null > +++ b/drivers/iio/adc/ti_adc.c > @@ -0,0 +1,216 @@ > +/* > + * TI ADC MFD driver > + * > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > + > +struct adc_device { > + struct ti_tscadc_dev *mfd_tscadc; > + struct iio_dev *idev; > + int channels; > +}; > + > +static unsigned int adc_readl(struct adc_device *adc, unsigned int reg) > +{ > + return readl(adc->mfd_tscadc->tscadc_base + reg); > +} > + > +static void adc_writel(struct adc_device *adc, unsigned int reg, > + unsigned int val) > +{ > + writel(val, adc->mfd_tscadc->tscadc_base + reg); > +} > + > +static void adc_step_config(struct adc_device *adc_dev) > +{ > + unsigned int stepconfig; > + int i, channels = 0, steps; > + > + /* Don't suppose you could tell us what the steps actually are? It's not a term I've come across before and right now I can't seem to find the relevant datasheet (and am inherently lazy ;) > + * There are 16 configurable steps and 8 analog input > + * lines available which are shared between Touchscreen and ADC. > + * > + * Steps backwards i.e. from 16 towards 0 are used by ADC > + * depending on number of input lines needed. > + * Channel would represent which analog input > + * needs to be given to ADC to digitalize data. > + */ > + > + steps = TOTAL_STEPS - adc_dev->channels; > + channels = TOTAL_CHANNELS - adc_dev->channels; > + > + stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1; > + > + for (i = (steps + 1); i <= TOTAL_STEPS; i++) { > + adc_writel(adc_dev, REG_STEPCONFIG(i), > + stepconfig | STEPCONFIG_INP(channels)); > + adc_writel(adc_dev, REG_STEPDELAY(i), > + STEPCONFIG_OPENDLY); > + channels++; > + } > + adc_writel(adc_dev, REG_SE, STPENB_STEPENB); > +} > + > +static int tiadc_channel_init(struct iio_dev *idev, struct adc_device *adc_dev) > +{ > + struct iio_chan_spec *chan_array; > + int i; > + > + idev->num_channels = adc_dev->channels; Given adc_dev is just used for this why not just pass in the number of channels? > + chan_array = kcalloc(idev->num_channels, sizeof(struct iio_chan_spec), > + GFP_KERNEL); > + > + if (chan_array == NULL) > + return -ENOMEM; > + > + for (i = 0; i < (idev->num_channels); i++) { > + struct iio_chan_spec *chan = chan_array + i; > + chan->type = IIO_VOLTAGE; > + chan->indexed = 1; > + chan->channel = i; You don't use the buffered interfaces so don't need anything below here. > + chan->scan_type.sign = 'u'; > + chan->scan_type.realbits = 12; > + chan->scan_type.storagebits = 32; > + chan->scan_type.shift = 0; > + } > + > + idev->channels = chan_array; whilst not critical it's a nice convention to drop in a blank line before return statements.. Just makes it slightly easier to parse. > + return idev->num_channels; > +} > + channels would be slightly more acurate I think... > +static void tiadc_channel_remove(struct iio_dev *idev) > +{ > + kfree(idev->channels); > +} > + > +static int tiadc_read_raw(struct iio_dev *idev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct adc_device *adc_dev = iio_priv(idev); > + int i; > + unsigned int fifo1count, readx1; > + Given adc_dev is only passed directly to adc_readl and adc_writel you could make those functions take the iio_dev instead.. > + fifo1count = adc_readl(adc_dev, REG_FIFO1CNT); What are the semantics of this? Is the channel guaranteed to be there? Is this just about ensuring we always get the latest reading? This is definitely a case where a little commenting would help the reader :) > + for (i = 0; i < fifo1count; i++) { > + readx1 = adc_readl(adc_dev, REG_FIFO1); > + if (i == chan->channel) { > + readx1 = readx1 & 0xfff; > + *val = readx1; might as well combine the two lines above... > + } > + } > + adc_writel(adc_dev, REG_SE, STPENB_STEPENB); > + return IIO_VAL_INT; > +} > + > +static const struct iio_info tiadc_info = { > + .read_raw = &tiadc_read_raw, > +}; > + > +static int __devinit tiadc_probe(struct platform_device *pdev) > +{ > + struct iio_dev *idev; > + int err; > + struct adc_device *adc_dev = NULL; I don't think there is any reason to initialize adc_dev... > + struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; > + struct mfd_tscadc_board *pdata; > + > + pdata = (struct mfd_tscadc_board *)tscadc_dev->dev->platform_data; > + if (!pdata || !pdata->adc_init) { > + dev_err(tscadc_dev->dev, "Could not find platform data\n"); > + return -EINVAL; > + } > + > + idev = iio_device_alloc(sizeof(struct adc_device)); > + if (idev == NULL) { > + dev_err(&pdev->dev, "failed to allocate iio device.\n"); > + err = -ENOMEM; > + goto err_allocate; > + } > + adc_dev = iio_priv(idev); > + > + tscadc_dev->adc = adc_dev; > + adc_dev->mfd_tscadc = tscadc_dev; > + adc_dev->idev = idev; hmm.. this is getting a bit circular... You could store the iio_dev pointer in tscadc_dev intead of the adc_dev one thus I think avoiding the need for this.. Still I guess it may be best to leave it as it currently is for consistency with the input driver. > + adc_dev->channels = pdata->adc_init->adc_channels; > + > + idev->dev.parent = &pdev->dev; > + idev->name = dev_name(&pdev->dev); > + idev->modes = INDIO_DIRECT_MODE; > + idev->info = &tiadc_info; > + > + adc_step_config(adc_dev); > + > + err = tiadc_channel_init(idev, adc_dev); > + if (err < 0) > + goto err_cleanup_channels; > + > + err = iio_device_register(idev); > + if (err) > + goto err_unregister; > + > + dev_info(&pdev->dev, "attached adc driver\n"); > + platform_set_drvdata(pdev, idev); > + > + return 0; > + > +err_unregister: > + tiadc_channel_remove(idev); > +err_cleanup_channels: > + iio_device_unregister(idev); > + iio_device_free(idev); > +err_allocate: > + return err; > +} > + > +static int __devexit tiadc_remove(struct platform_device *pdev) > +{ > + struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; > + struct adc_device *adc_dev = tscadc_dev->adc; > + struct iio_dev *idev = adc_dev->idev; > + > + iio_device_unregister(idev); > + tiadc_channel_remove(idev); > + > + tscadc_dev->adc = NULL; > + > + iio_device_free(idev); > + return 0; > +} > + > +static struct platform_driver tiadc_driver = { > + .driver = { > + .name = "tiadc", > + .owner = THIS_MODULE, > + }, > + .probe = tiadc_probe, > + .remove = __devexit_p(tiadc_remove), > +}; > + > +module_platform_driver(tiadc_driver); > + > +MODULE_DESCRIPTION("TI ADC controller driver"); > +MODULE_AUTHOR("Rachna Patil "); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/mfd/ti_tscadc.c b/drivers/mfd/ti_tscadc.c > index f26e53b..9dbd6d0 100644 > --- a/drivers/mfd/ti_tscadc.c > +++ b/drivers/mfd/ti_tscadc.c > @@ -23,6 +23,7 @@ > #include > #include > #include > +#include > > static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg) > { > @@ -55,14 +56,23 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev) > int irq; > int err, ctrl; > int clk_value, clock_rate; > - int tsc_wires; > + int tsc_wires, adc_channels = 0, total_channels; > > if (!pdata) { > dev_err(&pdev->dev, "Could not find platform data\n"); > return -EINVAL; > } > > + if (pdata->adc_init) > + adc_channels = pdata->adc_init->adc_channels; > + > tsc_wires = pdata->tsc_init->wires; > + total_channels = tsc_wires + adc_channels; > + > + if (total_channels > 8) { > + dev_err(&pdev->dev, "Number of i/p channels more than 8\n"); > + return -EINVAL; > + } > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > if (!res) { > @@ -149,6 +159,12 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev) > cell->platform_data = tscadc; > cell->pdata_size = sizeof(*tscadc); > > + /* ADC Cell */ > + cell = &tscadc->cells[ADC_CELL]; > + cell->name = "tiadc"; > + cell->platform_data = tscadc; > + cell->pdata_size = sizeof(*tscadc); > + > err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells, > TSCADC_CELLS, NULL, 0); > if (err < 0) > diff --git a/include/linux/mfd/ti_tscadc.h b/include/linux/mfd/ti_tscadc.h > index de314a6..3414883 100644 > --- a/include/linux/mfd/ti_tscadc.h > +++ b/include/linux/mfd/ti_tscadc.h > @@ -117,15 +117,19 @@ > > #define ADC_CLK 3000000 > #define MAX_CLK_DIV 7 > +#define TOTAL_STEPS 16 > +#define TOTAL_CHANNELS 8 > > -#define TSCADC_CELLS 1 > +#define TSCADC_CELLS 2 > > enum tscadc_cells { > TSC_CELL, > + ADC_CELL, > }; > > struct mfd_tscadc_board { > struct tsc_data *tsc_init; > + struct adc_data *adc_init; > }; > > struct ti_tscadc_dev { > @@ -136,6 +140,9 @@ struct ti_tscadc_dev { > > /* tsc device */ > struct tscadc *tsc; > + > + /* adc device */ > + struct adc_device *adc; > }; > > #endif > diff --git a/include/linux/platform_data/ti_adc.h b/include/linux/platform_data/ti_adc.h > new file mode 100644 > index 0000000..5a89f1d > --- /dev/null > +++ b/include/linux/platform_data/ti_adc.h > @@ -0,0 +1,14 @@ > +#ifndef __LINUX_TI_ADC_H > +#define __LINUX_TI_ADC_H > + > +/** > + * struct adc_data ADC Input information > + * @adc_channels: Number of analog inputs > + * available for ADC. > + */ > + > +struct adc_data { > + int adc_channels; > +}; > + > +#endif > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/