Return-Path: <linux-kernel-owner+willy=40w.ods.org@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id <S319338AbSH2UmY>; Thu, 29 Aug 2002 16:42:24 -0400
Received: (majordomo@vger.kernel.org) by vger.kernel.org
	id <S319339AbSH2UmX>; Thu, 29 Aug 2002 16:42:23 -0400
Received: from twilight.ucw.cz ([195.39.74.230]:55949 "EHLO twilight.ucw.cz")
	by vger.kernel.org with ESMTP id <S319338AbSH2UmW>;
	Thu, 29 Aug 2002 16:42:22 -0400
Date: Thu, 29 Aug 2002 22:46:21 +0200
From: Vojtech Pavlik <vojtech@suse.cz>
To: Andre Hedrick <andre@linux-ide.org>
Cc: Meelis Roos <mroos@tartu.cyber.ee>, linux-kernel@vger.kernel.org
Subject: Re: Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?)
Message-ID: <20020829224621.A4175@ucw.cz>
References: <Pine.LNX.4.44.0208292051520.25834-100000@ondatra.tartu-labor> <Pine.LNX.4.10.10208291235060.24156-100000@master.linux-ide.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <Pine.LNX.4.10.10208291235060.24156-100000@master.linux-ide.org>; from andre@linux-ide.org on Thu, Aug 29, 2002 at 12:37:19PM -0700
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2018
Lines: 44

On Thu, Aug 29, 2002 at 12:37:19PM -0700, Andre Hedrick wrote:

> On Thu, 29 Aug 2002, Meelis Roos wrote:
> 
> > pcibus = 33333
> > 00:07.1 vendor=8086 device=7111 class=0101 irq=0 base4=f001
> > ----------PIIX BusMastering IDE Configuration---------------
> > Driver Version:                     1.3
> > South Bridge:                       28945
> > Revision:                           IDE 0x1
> > Highest DMA rate:                   UDMA33
> > BM-DMA base:                        0xf000
> > PCI clock:                          33.3MHz
> > -----------------------Primary IDE-------Secondary IDE------
> > Enabled:                      yes                 yes
> > Simplex only:                  no                  no
> > Cable Type:                   40w                 40w
> > -------------------drive0----drive1----drive2----drive3-----
> > Prefetch+Post:        yes       yes       yes       yes
> > Transfer Mode:        PIO       PIO       PIO       PIO
> > Address Setup:       90ns      90ns      90ns      90ns
> > Cmd Active:         360ns     360ns     360ns     360ns
> > Cmd Recovery:       540ns     540ns     540ns     540ns
> > Data Active:         90ns      90ns      90ns      90ns
> > Data Recovery:       30ns      30ns      90ns      30ns
> > Cycle Time:         120ns     120ns     180ns     120ns
> > Transfer Rate:   16.6MB/s  16.6MB/s  11.1MB/s  16.6MB/s
> 
> That is not my work and you are on your own for that mess.
> That looks straight out of 2.5.30.

Don't be so quick with shooing people away - this is the output of the
'atapci' userspace program. It only reads the PCI config registers and
decodes them into a human readable form. The driver in 2.4.19 Meelis
Roos is using and the crash are both still yours.

-- 
Vojtech Pavlik
SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/