Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752267Ab2JFELW (ORCPT ); Sat, 6 Oct 2012 00:11:22 -0400 Received: from [12.239.217.82] ([12.239.217.82]:13639 "EHLO brontomerus.synaptics.com" rhost-flags-FAIL-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751296Ab2JFELQ (ORCPT ); Sat, 6 Oct 2012 00:11:16 -0400 From: Christopher Heiny To: Dmitry Torokhov Cc: Jean Delvare , Linux Kernel , Linux Input , Christopher Heiny , Allie Xiong , Vivian Ly , Daniel Rosenberg , Alexandra Chen , Joerie de Gram , Wolfram Sang , Mathieu Poirier , Linus Walleij , Naveen Kumar Gaddipati Subject: =?UTF-8?q?=5BRFC=20PATCH=2005/06=5D=20input/rmi4=3A=20F01=20-=20device=20control?= Date: Fri, 5 Oct 2012 21:10:02 -0700 Message-Id: <1349496603-20775-6-git-send-email-cheiny@synaptics.com> X-Mailer: git-send-email 1.7.7.6 In-Reply-To: <1349496603-20775-1-git-send-email-cheiny@synaptics.com> References: <1349496603-20775-1-git-send-email-cheiny@synaptics.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 48695 Lines: 1642 RMI Function 01 implements basic device control and power management behaviors for the RMI4 sensor. Since the last patch, we've decoupled rmi_f01.c implementation from rmi_driver.c, so rmi_f01.c acts as a standard driver module to handle F01 devices on the RMI bus. Like other modules, a number of attributes have been moved from sysfs to debugfs, depending on their expected use. rmi_f01.h exports definitions that we expect to be used by other functionality in the future (such as firmware reflash). Signed-off-by: Christopher Heiny Cc: Dmitry Torokhov Cc: Linus Walleij Cc: Naveen Kumar Gaddipati Cc: Joeri de Gram --- drivers/input/rmi4/rmi_f01.c | 1463 ++++++++++++++++++++++++++++++++++++++++++ drivers/input/rmi4/rmi_f01.h | 136 ++++ 2 files changed, 1599 insertions(+), 0 deletions(-) diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c new file mode 100644 index 0000000..d734f46 --- /dev/null +++ b/drivers/input/rmi4/rmi_f01.c @@ -0,0 +1,1463 @@ +/* + * Copyright (c) 2011-2012 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include "rmi_driver.h" +#include "rmi_f01.h" + +/** + * @reset - set this bit to force a firmware reset of the sensor. + */ +union f01_device_commands { + struct { + bool reset:1; + u8 reserved:7; + } __attribute__((__packed__)); + u8 reg; +}; + +/** + * @ctrl0 - see documentation in rmi_f01.h. + * @interrupt_enable - A mask of per-function interrupts on the touch sensor. + * @doze_interval - controls the interval between checks for finger presence + * when the touch sensor is in doze mode, in units of 10ms. + * @wakeup_threshold - controls the capacitance threshold at which the touch + * sensor will decide to wake up from that low power state. + * @doze_holdoff - controls how long the touch sensor waits after the last + * finger lifts before entering the doze state, in units of 100ms. + */ +struct f01_device_control { + union f01_device_control_0 ctrl0; + u8 *interrupt_enable; + u8 doze_interval; + u8 wakeup_threshold; + u8 doze_holdoff; +}; + +/** + * @has_ds4_queries - if true, the query registers relating to Design Studio 4 + * features are present. + * @has_multi_phy - if true, multiple physical communications interfaces are + * supported. + * @has_guest - if true, a "guest" device is supported. + */ +union f01_query_42 { + struct { + bool has_ds4_queries:1; + bool has_multi_phy:1; + bool has_guest:1; + u8 reserved:5; + } __attribute__((__packed__)); + u8 regs[1]; +}; + +/** + * @length - the length of the remaining Query43.* register block, not + * including the first register. + * @has_package_id_query - the package ID query data will be accessible from + * inside the ProductID query registers. + * @has_packrat_query - the packrat query data will be accessible from inside + * the ProductID query registers. + * @has_reset_query - the reset pin related registers are valid. + * @has_maskrev_query - the silicon mask revision number will be reported. + * @has_i2c_control - the register F01_RMI_Ctrl6 will exist. + * @has_spi_control - the register F01_RMI_Ctrl7 will exist. + * @has_attn_control - the register F01_RMI_Ctrl8 will exist. + * @reset_enabled - the hardware reset pin functionality has been enabled + * for this device. + * @reset_polarity - If this bit reports as ‘0’, it means that the reset state + * is active low. A ‘1’ means that the reset state is active high. + * @pullup_enabled - If set, it indicates that a built-in weak pull up has + * been enabled on the Reset pin; clear means that no pull-up is present. + * @reset_pin_number - This field represents which GPIO pin number has been + * assigned the reset functionality. + */ +union f01_ds4_queries { + struct { + u8 length:4; + u8 reserved_1:4; + + bool has_package_id_query:1; + bool has_packrat_query:1; + bool has_reset_query:1; + bool has_maskrev_query:1; + u8 reserved_2:4; + + bool has_i2c_control:1; + bool has_spi_control:1; + bool has_attn_control:1; + u8 reserved_3:5; + + bool reset_enabled:1; + bool reset_polarity:1; + bool pullup_enabled:1; + u8 reserved_4:1; + u8 reset_pin_number:4; + } __attribute__((__packed__)); + u8 regs[4]; +}; + +struct f01_data { + struct f01_device_control device_control; + union f01_basic_queries basic_queries; + union f01_device_status device_status; + u8 product_id[RMI_PRODUCT_ID_LENGTH+1]; + + u16 interrupt_enable_addr; + u16 doze_interval_addr; + u16 wakeup_threshold_addr; + u16 doze_holdoff_addr; + + int irq_count; + int num_of_irq_regs; + +#ifdef CONFIG_PM + bool suspended; + bool old_nosleep; +#endif + +#ifdef CONFIG_RMI4_DEBUG + struct dentry *debugfs_interrupt_enable; +#endif +}; + +#ifdef CONFIG_RMI4_DEBUG +struct f01_debugfs_data { + bool done; + struct rmi_function_container *fc; +}; + +static int f01_debug_open(struct inode *inodep, struct file *filp) +{ + struct f01_debugfs_data *data; + struct rmi_function_container *fc = inodep->i_private; + + data = devm_kzalloc(&fc->dev, sizeof(struct f01_debugfs_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->fc = fc; + filp->private_data = data; + return 0; +} + +static ssize_t interrupt_enable_read(struct file *filp, char __user *buffer, + size_t size, loff_t *offset) { + int i; + int len; + int total_len = 0; + char local_buf[size]; + char *current_buf = local_buf; + struct f01_debugfs_data *data = filp->private_data; + struct f01_data *f01 = data->fc->data; + + if (data->done) + return 0; + + data->done = 1; + + /* loop through each irq value and copy its + * string representation into buf */ + for (i = 0; i < f01->irq_count; i++) { + int irq_reg; + int irq_shift; + int interrupt_enable; + + irq_reg = i / 8; + irq_shift = i % 8; + interrupt_enable = + ((f01->device_control.interrupt_enable[irq_reg] + >> irq_shift) & 0x01); + + /* get next irq value and write it to buf */ + len = snprintf(current_buf, size - total_len, + "%u ", interrupt_enable); + /* bump up ptr to next location in buf if the + * snprintf was valid. Otherwise issue an error + * and return. */ + if (len > 0) { + current_buf += len; + total_len += len; + } else { + dev_err(&data->fc->dev, "Failed to build interrupt_enable buffer, code = %d.\n", + len); + return snprintf(local_buf, size, "unknown\n"); + } + } + len = snprintf(current_buf, size - total_len, "\n"); + if (len > 0) + total_len += len; + else + dev_warn(&data->fc->dev, "%s: Failed to append carriage return.\n", + __func__); + + if (copy_to_user(buffer, local_buf, total_len)) + return -EFAULT; + + return total_len; +} + +static ssize_t interrupt_enable_write(struct file *filp, + const char __user *buffer, size_t size, loff_t *offset) { + int retval; + char buf[size]; + char *local_buf = buf; + int i; + int irq_count = 0; + int irq_reg = 0; + struct f01_debugfs_data *data = filp->private_data; + struct f01_data *f01 = data->fc->data; + + retval = copy_from_user(buf, buffer, size); + if (retval) + return -EFAULT; + + for (i = 0; i < f01->irq_count && *local_buf != 0; + i++, local_buf += 2) { + int irq_shift; + int interrupt_enable; + int result; + + irq_reg = i / 8; + irq_shift = i % 8; + + /* get next interrupt mapping value and store and bump up to + * point to next item in local_buf */ + result = sscanf(local_buf, "%u", &interrupt_enable); + if ((result != 1) || + (interrupt_enable != 0 && interrupt_enable != 1)) { + dev_err(&data->fc->dev, "Interrupt enable[%d] is not a valid value 0x%x.\n", + i, interrupt_enable); + return -EINVAL; + } + if (interrupt_enable == 0) { + f01->device_control.interrupt_enable[irq_reg] &= + (1 << irq_shift) ^ 0xFF; + } else + f01->device_control.interrupt_enable[irq_reg] |= + (1 << irq_shift); + irq_count++; + } + + /* Make sure the irq count matches */ + if (irq_count != f01->irq_count) { + dev_err(&data->fc->dev, "Interrupt enable count of %d doesn't match device count of %d.\n", + irq_count, f01->irq_count); + return -EINVAL; + } + + /* write back to the control register */ + retval = rmi_write_block(data->fc->rmi_dev, f01->interrupt_enable_addr, + f01->device_control.interrupt_enable, + f01->num_of_irq_regs); + if (retval < 0) { + dev_err(&data->fc->dev, "Could not write interrupt_enable mask to %#06x\n", + f01->interrupt_enable_addr); + return retval; + } + + return size; +} + +static const struct file_operations interrupt_enable_fops = { + .owner = THIS_MODULE, + .open = f01_debug_open, + .read = interrupt_enable_read, + .write = interrupt_enable_write, +}; + +static int setup_debugfs(struct rmi_function_container *fc) +{ + struct f01_data *data = fc->data; + + if (!fc->debugfs_root) + return -ENODEV; + + data->debugfs_interrupt_enable = debugfs_create_file("interrupt_enable", + RMI_RW_ATTR, fc->debugfs_root, fc, &interrupt_enable_fops); + if (!data->debugfs_interrupt_enable) + dev_warn(&fc->dev, + "Failed to create debugfs interrupt_enable.\n"); + + return 0; +} + +static void teardown_debugfs(struct f01_data *f01) +{ + if (f01->debugfs_interrupt_enable) + debugfs_remove(f01->debugfs_interrupt_enable); +} +#endif + + +static ssize_t rmi_fn_01_productinfo_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_productid_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_manufacturer_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_datecode_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_reportrate_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_reportrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_interrupt_enable_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_doze_interval_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_doze_interval_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_wakeup_threshold_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_wakeup_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_doze_holdoff_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_doze_holdoff_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_reset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_sleepmode_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_sleepmode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_nosleep_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_nosleep_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_chargerinput_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_chargerinput_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +static ssize_t rmi_fn_01_configured_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_unconfigured_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_flashprog_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static ssize_t rmi_fn_01_statuscode_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static int rmi_f01_alloc_memory(struct rmi_function_container *fc, + int num_of_irq_regs); + +static int rmi_f01_initialize(struct rmi_function_container *fc); + +static int rmi_f01_create_sysfs(struct rmi_function_container *fc); + +static int rmi_f01_config(struct rmi_function_container *fc); + + +static struct device_attribute fn_01_attrs[] = { + __ATTR(productinfo, RMI_RO_ATTR, + rmi_fn_01_productinfo_show, rmi_store_error), + __ATTR(productid, RMI_RO_ATTR, + rmi_fn_01_productid_show, rmi_store_error), + __ATTR(manufacturer, RMI_RO_ATTR, + rmi_fn_01_manufacturer_show, rmi_store_error), + __ATTR(datecode, RMI_RO_ATTR, + rmi_fn_01_datecode_show, rmi_store_error), + + /* control register access */ + __ATTR(sleepmode, RMI_RW_ATTR, + rmi_fn_01_sleepmode_show, rmi_fn_01_sleepmode_store), + __ATTR(nosleep, RMI_RW_ATTR, + rmi_fn_01_nosleep_show, rmi_fn_01_nosleep_store), + __ATTR(chargerinput, RMI_RW_ATTR, + rmi_fn_01_chargerinput_show, rmi_fn_01_chargerinput_store), + __ATTR(reportrate, RMI_RW_ATTR, + rmi_fn_01_reportrate_show, rmi_fn_01_reportrate_store), + /* We don't want arbitrary callers changing the interrupt enable mask, + * so it's read only. + */ + __ATTR(interrupt_enable, RMI_RO_ATTR, + rmi_fn_01_interrupt_enable_show, rmi_store_error), + __ATTR(doze_interval, RMI_RW_ATTR, + rmi_fn_01_doze_interval_show, rmi_fn_01_doze_interval_store), + __ATTR(wakeup_threshold, RMI_RW_ATTR, + rmi_fn_01_wakeup_threshold_show, + rmi_fn_01_wakeup_threshold_store), + __ATTR(doze_holdoff, RMI_RW_ATTR, + rmi_fn_01_doze_holdoff_show, rmi_fn_01_doze_holdoff_store), + + /* We make report rate RO, since the driver uses that to look for + * resets. We don't want someone faking us out by changing that + * bit. + */ + __ATTR(configured, RMI_RO_ATTR, + rmi_fn_01_configured_show, rmi_store_error), + + /* Command register access. */ + __ATTR(reset, RMI_WO_ATTR, + rmi_show_error, rmi_fn_01_reset_store), + + /* STatus register access. */ + __ATTR(unconfigured, RMI_RO_ATTR, + rmi_fn_01_unconfigured_show, rmi_store_error), + __ATTR(flashprog, RMI_RO_ATTR, + rmi_fn_01_flashprog_show, rmi_store_error), + __ATTR(statuscode, RMI_RO_ATTR, + rmi_fn_01_statuscode_show, rmi_store_error), +}; + +/* Utility routine to set the value of a bit field in a register. */ +int rmi_mask_and_set(struct rmi_device *rmi_dev, + u16 address, + u8 mask, + u8 set) +{ + u8 reg_contents; + int retval; + + retval = rmi_read(rmi_dev, address, ®_contents); + if (retval < 0) + return retval; + reg_contents = (reg_contents & ~mask) | set; + retval = rmi_write(rmi_dev, address, reg_contents); + if (retval == 1) + return 0; + else if (retval == 0) + return -EIO; + return retval; +} + +static ssize_t rmi_fn_01_productinfo_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "0x%02x 0x%02x\n", + data->basic_queries.productinfo_1, + data->basic_queries.productinfo_2); +} + +static ssize_t rmi_fn_01_productid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%s\n", data->product_id); +} + +static ssize_t rmi_fn_01_manufacturer_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "0x%02x\n", + data->basic_queries.manufacturer_id); +} + +static ssize_t rmi_fn_01_datecode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "20%02u-%02u-%02u\n", + data->basic_queries.year, + data->basic_queries.month, + data->basic_queries.day); +} + +static ssize_t rmi_fn_01_reset_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct rmi_function_container *fc = NULL; + unsigned int reset; + int retval = 0; + /* Command register always reads as 0, so we can just use a local. */ + union f01_device_commands commands = {}; + + fc = to_rmi_function_container(dev); + + if (sscanf(buf, "%u", &reset) != 1) + return -EINVAL; + if (reset < 0 || reset > 1) + return -EINVAL; + + /* Per spec, 0 has no effect, so we skip it entirely. */ + if (reset) { + commands.reset = 1; + retval = rmi_write_block(fc->rmi_dev, fc->fd.command_base_addr, + &commands.reg, sizeof(commands.reg)); + if (retval < 0) { + dev_err(dev, "Failed to issue reset command, code = %d.", + retval); + return retval; + } + } + + return count; +} + +static ssize_t rmi_fn_01_sleepmode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, + "%d\n", data->device_control.ctrl0.sleep_mode); +} + +static ssize_t rmi_fn_01_sleepmode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || !RMI_IS_VALID_SLEEPMODE(new_value)) { + dev_err(dev, "%s: Invalid sleep mode %s.", __func__, buf); + return -EINVAL; + } + + dev_dbg(dev, "Setting sleep mode to %ld.", new_value); + data->device_control.ctrl0.sleep_mode = new_value; + retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write sleep mode, code %d.\n", retval); + return retval; +} + +static ssize_t rmi_fn_01_nosleep_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.ctrl0.nosleep); +} + +static ssize_t rmi_fn_01_nosleep_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 1) { + dev_err(dev, "%s: Invalid nosleep bit %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.ctrl0.nosleep = new_value; + retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write nosleep bit.\n"); + return retval; +} + +static ssize_t rmi_fn_01_chargerinput_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.ctrl0.charger_input); +} + +static ssize_t rmi_fn_01_chargerinput_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 1) { + dev_err(dev, "%s: Invalid chargerinput bit %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.ctrl0.charger_input = new_value; + retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write chargerinput bit.\n"); + return retval; +} + +static ssize_t rmi_fn_01_reportrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.ctrl0.report_rate); +} + +static ssize_t rmi_fn_01_reportrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 1) { + dev_err(dev, "%s: Invalid reportrate bit %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.ctrl0.report_rate = new_value; + retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write reportrate bit.\n"); + return retval; +} + +static ssize_t rmi_fn_01_interrupt_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rmi_function_container *fc; + struct f01_data *data; + int i, len, total_len = 0; + char *current_buf = buf; + + fc = to_rmi_function_container(dev); + data = fc->data; + /* loop through each irq value and copy its + * string representation into buf */ + for (i = 0; i < data->irq_count; i++) { + int irq_reg; + int irq_shift; + int interrupt_enable; + + irq_reg = i / 8; + irq_shift = i % 8; + interrupt_enable = + ((data->device_control.interrupt_enable[irq_reg] + >> irq_shift) & 0x01); + + /* get next irq value and write it to buf */ + len = snprintf(current_buf, PAGE_SIZE - total_len, + "%u ", interrupt_enable); + /* bump up ptr to next location in buf if the + * snprintf was valid. Otherwise issue an error + * and return. */ + if (len > 0) { + current_buf += len; + total_len += len; + } else { + dev_err(dev, "Failed to build interrupt_enable buffer, code = %d.\n", + len); + return snprintf(buf, PAGE_SIZE, "unknown\n"); + } + } + len = snprintf(current_buf, PAGE_SIZE - total_len, "\n"); + if (len > 0) + total_len += len; + else + dev_warn(dev, "%s: Failed to append carriage return.\n", + __func__); + return total_len; + +} + +static ssize_t rmi_fn_01_doze_interval_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.doze_interval); + +} + +static ssize_t rmi_fn_01_doze_interval_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + u16 ctrl_base_addr; + + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 255) { + dev_err(dev, "%s: Invalid doze interval %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.doze_interval = new_value; + ctrl_base_addr = fc->fd.control_base_addr + sizeof(u8) + + (sizeof(u8)*(data->num_of_irq_regs)); + dev_dbg(dev, "doze_interval store address %x, value %d", + ctrl_base_addr, data->device_control.doze_interval); + + retval = rmi_write_block(fc->rmi_dev, data->doze_interval_addr, + &data->device_control.doze_interval, + sizeof(u8)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write doze interval.\n"); + return retval; + +} + +static ssize_t rmi_fn_01_wakeup_threshold_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.wakeup_threshold); +} + +static ssize_t rmi_fn_01_wakeup_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 255) { + dev_err(dev, "%s: Invalid wakeup threshold %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.doze_interval = new_value; + retval = rmi_write_block(fc->rmi_dev, data->wakeup_threshold_addr, + &data->device_control.wakeup_threshold, + sizeof(u8)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write wakeup threshold.\n"); + return retval; + +} + +static ssize_t rmi_fn_01_doze_holdoff_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.doze_holdoff); + +} + + +static ssize_t rmi_fn_01_doze_holdoff_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct f01_data *data = NULL; + unsigned long new_value; + int retval; + + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + retval = strict_strtoul(buf, 10, &new_value); + if (retval < 0 || new_value < 0 || new_value > 255) { + dev_err(dev, "%s: Invalid doze holdoff %s.", __func__, buf); + return -EINVAL; + } + + data->device_control.doze_interval = new_value; + retval = rmi_write_block(fc->rmi_dev, data->doze_holdoff_addr, + &data->device_control.doze_holdoff, + sizeof(u8)); + if (retval >= 0) + retval = count; + else + dev_err(dev, "Failed to write doze holdoff.\n"); + return retval; + +} + +static ssize_t rmi_fn_01_configured_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_control.ctrl0.configured); +} + +static ssize_t rmi_fn_01_unconfigured_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_status.unconfigured); +} + +static ssize_t rmi_fn_01_flashprog_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->device_status.flash_prog); +} + +static ssize_t rmi_fn_01_statuscode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct f01_data *data = NULL; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + data = fc->data; + + return snprintf(buf, PAGE_SIZE, "0x%02x\n", + data->device_status.status_code); +} + +static int f01_device_init(struct rmi_function_container *fc) +{ + struct rmi_driver_data *driver_data = + dev_get_drvdata(&fc->rmi_dev->dev); + int error; + + error = rmi_f01_alloc_memory(fc, driver_data->num_of_irq_regs); + if (error < 0) + return error; + + error = rmi_f01_initialize(fc); + if (error < 0) + return error; + + error = rmi_f01_create_sysfs(fc); + if (error < 0) + return error; + + return 0; +} + +static int rmi_f01_alloc_memory(struct rmi_function_container *fc, + int num_of_irq_regs) +{ + struct f01_data *f01; + + f01 = devm_kzalloc(&fc->dev, sizeof(struct f01_data), GFP_KERNEL); + if (!f01) { + dev_err(&fc->dev, "Failed to allocate fn_01_data.\n"); + return -ENOMEM; + } + + f01->device_control.interrupt_enable = devm_kzalloc(&fc->dev, + sizeof(u8)*(num_of_irq_regs), + GFP_KERNEL); + if (!f01->device_control.interrupt_enable) { + dev_err(&fc->dev, "Failed to allocate interrupt enable.\n"); + return -ENOMEM; + } + fc->data = f01; + + return 0; +} + +static int rmi_f01_initialize(struct rmi_function_container *fc) +{ + u8 temp; + int retval; + u16 ctrl_base_addr; + struct rmi_device *rmi_dev = fc->rmi_dev; + struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev); + struct f01_data *data = fc->data; + struct rmi_device_platform_data *pdata = to_rmi_platform_data(rmi_dev); + + /* Set the configured bit and (optionally) other important stuff + * in the device control register. */ + ctrl_base_addr = fc->fd.control_base_addr; + retval = rmi_read_block(rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read F01 control.\n"); + return retval; + } + switch (pdata->power_management.nosleep) { + case RMI_F01_NOSLEEP_DEFAULT: + break; + case RMI_F01_NOSLEEP_OFF: + data->device_control.ctrl0.nosleep = 0; + break; + case RMI_F01_NOSLEEP_ON: + data->device_control.ctrl0.nosleep = 1; + break; + } + /* Sleep mode might be set as a hangover from a system crash or + * reboot without power cycle. If so, clear it so the sensor + * is certain to function. + */ + if (data->device_control.ctrl0.sleep_mode != RMI_SLEEP_MODE_NORMAL) { + dev_warn(&fc->dev, + "WARNING: Non-zero sleep mode found. Clearing...\n"); + data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL; + } + + data->device_control.ctrl0.configured = 1; + retval = rmi_write_block(rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write F01 control.\n"); + return retval; + } + + data->irq_count = driver_data->irq_count; + data->num_of_irq_regs = driver_data->num_of_irq_regs; + ctrl_base_addr += sizeof(union f01_device_control_0); + + data->interrupt_enable_addr = ctrl_base_addr; + retval = rmi_read_block(rmi_dev, ctrl_base_addr, + data->device_control.interrupt_enable, + sizeof(u8)*(driver_data->num_of_irq_regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read F01 control interrupt enable register.\n"); + goto error_exit; + } + ctrl_base_addr += driver_data->num_of_irq_regs; + + /* dummy read in order to clear irqs */ + retval = rmi_read(rmi_dev, fc->fd.data_base_addr + 1, &temp); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read Interrupt Status.\n"); + return retval; + } + + retval = rmi_read_block(rmi_dev, fc->fd.query_base_addr, + data->basic_queries.regs, + sizeof(data->basic_queries.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read device query registers.\n"); + return retval; + } + + retval = rmi_read_block(rmi_dev, + fc->fd.query_base_addr + sizeof(data->basic_queries.regs), + data->product_id, RMI_PRODUCT_ID_LENGTH); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read product ID.\n"); + return retval; + } + data->product_id[RMI_PRODUCT_ID_LENGTH] = '\0'; + dev_info(&fc->dev, "found RMI device, manufacturer: %s, product: %s\n", + data->basic_queries.manufacturer_id == 1 ? + "synaptics" : "unknown", + data->product_id); + + /* read control register */ + if (data->basic_queries.has_adjustable_doze) { + data->doze_interval_addr = ctrl_base_addr; + ctrl_base_addr++; + + if (pdata->power_management.doze_interval) { + data->device_control.doze_interval = + pdata->power_management.doze_interval; + retval = rmi_write(rmi_dev, data->doze_interval_addr, + data->device_control.doze_interval); + if (retval < 0) { + dev_err(&fc->dev, "Failed to configure F01 doze interval register.\n"); + goto error_exit; + } + } else { + retval = rmi_read(rmi_dev, data->doze_interval_addr, + &data->device_control.doze_interval); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read F01 doze interval register.\n"); + goto error_exit; + } + } + + data->wakeup_threshold_addr = ctrl_base_addr; + ctrl_base_addr++; + + if (pdata->power_management.wakeup_threshold) { + data->device_control.wakeup_threshold = + pdata->power_management.wakeup_threshold; + retval = rmi_write(rmi_dev, data->wakeup_threshold_addr, + data->device_control.wakeup_threshold); + if (retval < 0) { + dev_err(&fc->dev, "Failed to configure F01 wakeup threshold register.\n"); + goto error_exit; + } + } else { + retval = rmi_read(rmi_dev, data->wakeup_threshold_addr, + &data->device_control.wakeup_threshold); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read F01 wakeup threshold register.\n"); + goto error_exit; + } + } + } + + if (data->basic_queries.has_adjustable_doze_holdoff) { + data->doze_holdoff_addr = ctrl_base_addr; + ctrl_base_addr++; + + if (pdata->power_management.doze_holdoff) { + data->device_control.doze_holdoff = + pdata->power_management.doze_holdoff; + retval = rmi_write(rmi_dev, data->doze_holdoff_addr, + data->device_control.doze_holdoff); + if (retval < 0) { + dev_err(&fc->dev, "Failed to configure F01 doze holdoff register.\n"); + goto error_exit; + } + } else { + retval = rmi_read(rmi_dev, data->doze_holdoff_addr, + &data->device_control.doze_holdoff); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read F01 doze holdoff register.\n"); + goto error_exit; + } + } + } + + retval = rmi_read_block(rmi_dev, fc->fd.data_base_addr, + data->device_status.regs, ARRAY_SIZE(data->device_status.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read device status.\n"); + goto error_exit; + } + + if (data->device_status.unconfigured) { + dev_err(&fc->dev, "Device reset during configuration process, status: %#02x!\n", + data->device_status.status_code); + retval = -EINVAL; + goto error_exit; + } + + if (IS_ENABLED(CONFIG_RMI4_DEBUG)) { + retval = setup_debugfs(fc); + if (retval < 0) + dev_warn(&fc->dev, "Failed to setup debugfs. Code: %d.\n", + retval); + } + + return retval; + + error_exit: + kfree(data); + return retval; +} + +static int rmi_f01_create_sysfs(struct rmi_function_container *fc) +{ + int attr_count = 0; + int retval = 0; + struct f01_data *data = fc->data; + + dev_dbg(&fc->dev, "Creating sysfs files."); + for (attr_count = 0; attr_count < ARRAY_SIZE(fn_01_attrs); + attr_count++) { + if (!strcmp("doze_interval", fn_01_attrs[attr_count].attr.name) + && !data->basic_queries.has_lts) { + continue; + } + if (!strcmp("wakeup_threshold", + fn_01_attrs[attr_count].attr.name) + && !data->basic_queries.has_adjustable_doze) { + continue; + } + if (!strcmp("doze_holdoff", fn_01_attrs[attr_count].attr.name) + && !data->basic_queries.has_adjustable_doze_holdoff) { + continue; + } + retval = sysfs_create_file(&fc->dev.kobj, + &fn_01_attrs[attr_count].attr); + if (retval < 0) { + dev_err(&fc->dev, "Failed to create sysfs file for %s.", + fn_01_attrs[attr_count].attr.name); + goto err_remove_sysfs; + } + } + + return 0; + +err_remove_sysfs: + for (attr_count--; attr_count >= 0; attr_count--) + sysfs_remove_file(&fc->dev.kobj, + &fn_01_attrs[attr_count].attr); + + return retval; +} + +static int rmi_f01_config(struct rmi_function_container *fc) +{ + struct f01_data *data = fc->data; + int retval; + + retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write device_control.reg.\n"); + return retval; + } + + retval = rmi_write_block(fc->rmi_dev, data->interrupt_enable_addr, + data->device_control.interrupt_enable, + sizeof(u8)*(data->num_of_irq_regs)); + + if (retval < 0) { + dev_err(&fc->dev, "Failed to write interrupt enable.\n"); + return retval; + } + if (data->basic_queries.has_lts) { + retval = rmi_write_block(fc->rmi_dev, data->doze_interval_addr, + &data->device_control.doze_interval, + sizeof(u8)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write doze interval.\n"); + return retval; + } + } + + if (data->basic_queries.has_adjustable_doze) { + retval = rmi_write_block( + fc->rmi_dev, data->wakeup_threshold_addr, + &data->device_control.wakeup_threshold, + sizeof(u8)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write wakeup threshold.\n"); + return retval; + } + } + + if (data->basic_queries.has_adjustable_doze_holdoff) { + retval = rmi_write_block(fc->rmi_dev, data->doze_holdoff_addr, + &data->device_control.doze_holdoff, + sizeof(u8)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write doze holdoff.\n"); + return retval; + } + } + return 0; +} + +#ifdef CONFIG_PM +static int rmi_f01_suspend(struct rmi_function_container *fc) +{ + struct rmi_device *rmi_dev = fc->rmi_dev; + struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev); + struct f01_data *data = driver_data->f01_container->data; + int retval = 0; + + if (data->suspended) + return 0; + + data->old_nosleep = data->device_control.ctrl0.nosleep; + data->device_control.ctrl0.nosleep = 0; + data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_SENSOR_SLEEP; + + retval = rmi_write_block(rmi_dev, + driver_data->f01_container->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to write sleep mode. Code: %d.\n", + retval); + data->device_control.ctrl0.nosleep = data->old_nosleep; + data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL; + } else { + data->suspended = true; + retval = 0; + } + + return retval; +} + +static int rmi_f01_resume(struct rmi_function_container *fc) +{ + struct rmi_device *rmi_dev = fc->rmi_dev; + struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev); + struct f01_data *data = driver_data->f01_container->data; + int retval = 0; + + if (!data->suspended) + return 0; + + data->device_control.ctrl0.nosleep = data->old_nosleep; + data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL; + + retval = rmi_write_block(rmi_dev, + driver_data->f01_container->fd.control_base_addr, + data->device_control.ctrl0.regs, + ARRAY_SIZE(data->device_control.ctrl0.regs)); + if (retval < 0) + dev_err(&fc->dev, + "Failed to restore normal operation. Code: %d.\n", + retval); + else { + data->suspended = false; + retval = 0; + } + + return retval; +} +#endif /* CONFIG_PM */ + +static int f01_remove_device(struct device *dev) +{ + int attr_count; + struct rmi_function_container *fc = to_rmi_function_container(dev); + + if (IS_ENABLED(CONFIG_RMI4_DEBUG)) + teardown_debugfs(fc->data); + + for (attr_count = 0; attr_count < ARRAY_SIZE(fn_01_attrs); + attr_count++) { + sysfs_remove_file(&fc->dev.kobj, &fn_01_attrs[attr_count].attr); + } + return 0; +} + +static int rmi_f01_attention(struct rmi_function_container *fc, u8 *irq_bits) +{ + struct rmi_device *rmi_dev = fc->rmi_dev; + struct f01_data *data = fc->data; + int retval; + + retval = rmi_read_block(rmi_dev, fc->fd.data_base_addr, + data->device_status.regs, ARRAY_SIZE(data->device_status.regs)); + if (retval < 0) { + dev_err(&fc->dev, "Failed to read device status, code: %d.\n", + retval); + return retval; + } + if (data->device_status.unconfigured) { + dev_warn(&fc->dev, "Device reset detected.\n"); + retval = rmi_dev->driver->reset_handler(rmi_dev); + if (retval < 0) + return retval; + } + return 0; +} + +static int f01_probe(struct device *dev); + +static struct rmi_function_handler function_handler = { + .driver = { + .owner = THIS_MODULE, + .name = "rmi_f01", + .bus = &rmi_bus_type, + .probe = f01_probe, + .remove = f01_remove_device, + }, + .func = 0x01, + .config = rmi_f01_config, + .attention = rmi_f01_attention, + +#ifdef CONFIG_PM + .suspend = rmi_f01_suspend, + .resume = rmi_f01_resume, +#endif /* CONFIG_PM */ +}; + +static __devinit int f01_probe(struct device *dev) +{ + struct rmi_function_container *fc; + + if (dev->type != &rmi_function_type) { + dev_dbg(dev, "Not a function device.\n"); + return 1; + } + fc = to_rmi_function_container(dev); + if (fc->fd.function_number != function_handler.func) { + dev_dbg(dev, "Device is F%02X, not F%02X.\n", + fc->fd.function_number, function_handler.func); + return 1; + } + + dev_dbg(dev, "Yay! It is F01!\n"); + return f01_device_init(fc); +} + +static int __init rmi_f01_module_init(void) +{ + int error; + + error = driver_register(&function_handler.driver); + if (error < 0) { + pr_err("%s: register failed!\n", __func__); + return error; + } + + return 0; +} + +static void __exit rmi_f01_module_exit(void) +{ + driver_unregister(&function_handler.driver); +} + +module_init(rmi_f01_module_init); +module_exit(rmi_f01_module_exit); + +MODULE_AUTHOR("Christopher Heiny "); +MODULE_DESCRIPTION("RMI F01 module"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(RMI_DRIVER_VERSION); diff --git a/drivers/input/rmi4/rmi_f01.h b/drivers/input/rmi4/rmi_f01.h new file mode 100644 index 0000000..34db09f --- /dev/null +++ b/drivers/input/rmi4/rmi_f01.h @@ -0,0 +1,136 @@ +/* + * Copyright (c) 2012 Synaptics Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef _RMI_F01_H +#define _RMI_F01_H + +#define RMI_PRODUCT_ID_LENGTH 10 + +/** + * @manufacturer_id - reports the identity of the manufacturer of the RMI + * device. Synaptics RMI devices report a Manufacturer ID of $01. + * @custom_map - at least one custom, non + * RMI-compatible register exists in the register address map for this device. + * @non-compliant - the device implements a register map that is not compliant + * with the RMI specification. + * @has_lts - the device uses Synaptics' LTS hardware architecture. + * @has_sensor_id - the SensorID query register (F01_RMI_Query22) exists. + * @has_charger_input - the ChargerConnected bit (F01_RMI_Ctrl0, bit 5) is + * meaningful. + * @has_adjustable_doze - the doze (power management) control registers exist. + * @has_adjustable_doze_holdoff - the doze holdoff register exists. + * @has_product_properties - indicates the presence of F01_RMI_Query42, + * ProductProperties2. + * @productinfo_1 - meaning varies from product to product, consult your + * product spec sheet. + * @productinfo_2 - meaning varies from product to product, consult your + * product spec sheet. + * @year - year of manufacture MOD 2000. + * @month - month of manufacture + * @day - day of manufacture + * @wafer_id1_lsb - The wafer-lot ID registers record the lot number of the + * wafer from which the module’s touch controller was produced. + * @wafer_id1_msb - The wafer-lot ID registers record the lot number of the + * wafer from which the module’s touch controller was produced. + * @wafer_id2_lsb - The wafer-lot ID registers record the lot number of the + * wafer from which the module’s touch controller was produced. + * @wafer_id2_msb - The wafer-lot ID registers record the lot number of the + * wafer from which the module’s touch controller was produced. + * @wafer_id3_lsb - The wafer-lot ID registers record the lot number of the + * wafer from which the module’s touch controller was produced. + */ +union f01_basic_queries { + struct { + u8 manufacturer_id:8; + + bool custom_map:1; + bool non_compliant:1; + bool has_lts:1; + bool has_sensor_id:1; + bool has_charger_input:1; + bool has_adjustable_doze:1; + bool has_adjustable_doze_holdoff:1; + bool has_product_properties_2:1; + + u8 productinfo_1:7; + bool q2_bit_7:1; + u8 productinfo_2:7; + bool q3_bit_7:1; + + u8 year:5; + u8 month:4; + u8 day:5; + bool cp1:1; + bool cp2:1; + u8 wafer_id1_lsb:8; + u8 wafer_id1_msb:8; + u8 wafer_id2_lsb:8; + u8 wafer_id2_msb:8; + u8 wafer_id3_lsb:8; + } __attribute__((__packed__)); + u8 regs[11]; +}; + +union f01_device_status { + struct { + u8 status_code:4; + u8 reserved:2; + bool flash_prog:1; + bool unconfigured:1; + } __attribute__((__packed__)); + u8 regs[1]; +}; + +/* control register bits */ +#define RMI_SLEEP_MODE_NORMAL (0x00) +#define RMI_SLEEP_MODE_SENSOR_SLEEP (0x01) +#define RMI_SLEEP_MODE_RESERVED0 (0x02) +#define RMI_SLEEP_MODE_RESERVED1 (0x03) + +#define RMI_IS_VALID_SLEEPMODE(mode) \ + (mode >= RMI_SLEEP_MODE_NORMAL && mode <= RMI_SLEEP_MODE_RESERVED1) + +/** + * @sleep_mode - This field controls power management on the device. This + * field affects all functions of the device together. + * @nosleep - When set to ‘1’, this bit disables whatever sleep mode may be + * selected by the sleep_mode field,and forces the device to run at full power + * without sleeping. + * @charger_input - When this bit is set to ‘1’, the touch controller employs + * a noise-filtering algorithm designed for use with a connected battery + * charger. + * @report_rate - sets the report rate for the device. The effect of this + * setting is highly product dependent. Check the spec sheet for your + * particular touch sensor. + * @configured - written by the host as an indicator that the device has been + * successfuly configured. + */ +union f01_device_control_0 { + struct { + u8 sleep_mode:2; + bool nosleep:1; + u8 reserved:2; + bool charger_input:1; + bool report_rate:1; + bool configured:1; + } __attribute__((__packed__)); + u8 regs[1]; +}; + +#endif -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/