Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752617Ab2JFFxN (ORCPT ); Sat, 6 Oct 2012 01:53:13 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:34629 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752490Ab2JFFxI (ORCPT ); Sat, 6 Oct 2012 01:53:08 -0400 From: YAMANE Toshiaki To: Greg Kroah-Hartman Cc: Ian Abbott , Frank Mori Hess , linux-kernel@vger.kernel.org, YAMANE Toshiaki Subject: [PATCH] staging/comedi: Use dev_ printks in rtd520.c Date: Sat, 6 Oct 2012 14:53:02 +0900 Message-Id: <1349502782-8809-1-git-send-email-yamanetoshi@gmail.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3613 Lines: 98 fixed below checkpatch warning. -Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... Signed-off-by: YAMANE Toshiaki --- drivers/staging/comedi/drivers/rtd520.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 41d24b0..d7ed26a 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -507,15 +507,14 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev) } } if (i == limit) { - printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", - DRV_NAME); + dev_info(dev->class_dev, "failed to probe fifo size.\n"); return -EIO; } writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR); if (fifo_size != 0x400 && fifo_size != 0x2000) { - printk - (KERN_INFO "\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n", - DRV_NAME, fifo_size); + dev_info(dev->class_dev, + "unexpected fifo size of %i, expected 1024 or 8192.\n", + fifo_size); return -EIO; } return fifo_size; @@ -1600,7 +1599,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) int index; #endif - printk(KERN_INFO "comedi%d: rtd520 attaching.\n", dev->minor); + dev_info(dev->class_dev, "rtd520 attaching.\n"); #if defined(CONFIG_COMEDI_DEBUG) && defined(USE_DMA) /* You can set this a load time: modprobe comedi comedi_debug=1 */ @@ -1626,7 +1625,8 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) ret = comedi_pci_enable(pcidev, DRV_NAME); if (ret < 0) { - printk(KERN_INFO "Failed to enable PCI device and request regions.\n"); + dev_info(dev->class_dev, + "Failed to enable PCI device and request regions.\n"); return ret; } dev->iobase = 1; /* the "detach" needs this */ @@ -1653,8 +1653,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) pci_read_config_byte(pcidev, PCI_LATENCY_TIMER, &pci_latency); if (pci_latency < 32) { - printk(KERN_INFO "%s: PCI latency changed from %d to %d\n", - dev->board_name, pci_latency, 32); + dev_info(dev->class_dev, + "PCI latency changed from %d to %d\n", + pci_latency, 32); pci_write_config_byte(pcidev, PCI_LATENCY_TIMER, 32); } else { @@ -1675,7 +1676,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) } /* Show board configuration */ - printk(KERN_INFO "%s:", dev->board_name); + dev_info(dev->class_dev, "%s:", dev->board_name); ret = comedi_alloc_subdevices(dev, 4); if (ret) @@ -1767,7 +1768,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) return ret; } dev->irq = pcidev->irq; - printk(KERN_INFO "( irq=%u )", dev->irq); + dev_info(dev->class_dev, "( irq=%u )", dev->irq); ret = rtd520_probe_fifo_depth(dev); if (ret < 0) @@ -1844,7 +1845,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* set DMA trigger source */ writel(DMAS_ADFIFO_HALF_FULL, devpriv->las0 + LAS0_DMA0_SRC); } else { - printk(KERN_INFO "( no IRQ->no DMA )"); + dev_info(dev->class_dev, "( no IRQ->no DMA )"); } #endif /* USE_DMA */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/