Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754359Ab2JKIV6 (ORCPT ); Thu, 11 Oct 2012 04:21:58 -0400 Received: from co202.xi-lite.net ([149.6.83.202]:36765 "EHLO co202.xi-lite.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751237Ab2JKIVv (ORCPT ); Thu, 11 Oct 2012 04:21:51 -0400 Date: Thu, 11 Oct 2012 10:21:49 +0200 From: Ivan Djelic To: "Philip, Avinash" , , CC: "dwmw2@infradead.org" , "artem.bityutskiy@linux.intel.com" , "linux-mtd@lists.infradead.org" , "linux-kernel@vger.kernel.org" , "linux-omap@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" Subject: Re: [PATCH 4/4] mtd: nand: omap2: Add data correction support Message-ID: <20121011082149.GA15609@parrot.com> References: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> <1349274589-11389-5-git-send-email-avinashphilip@ti.com> <20121003192044.GB27502@parrot.com> <518397C60809E147AF5323E0420B992E3E9B8A65@DBDE01.ent.ti.com> <20121005142338.GA7199@parrot.com> <518397C60809E147AF5323E0420B992E3E9CA829@DBDE01.ent.ti.com> <20121010170806.GB13585@parrot.com> <518397C60809E147AF5323E0420B992E3E9CB751@DBDE01.ent.ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <518397C60809E147AF5323E0420B992E3E9CB751@DBDE01.ent.ti.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2347 Lines: 46 On Thu, Oct 11, 2012 at 06:27:13AM +0100, Philip, Avinash wrote: (...) > > Another simple strategy could use the fact that you add a 14th zero byte to > > the 13 BCH bytes for RBL compatibility: > > RBL compatibility (14th byte) is applicable only for BCH8 ecc scheme. > > So I am planning adding an extra byte (0) for BCH4 ecc scheme. So with this > we can go for same approaches in BCH4 & BCH8 ecc scheme. > > If I understood correctly, software BCH ecc scheme is modifying calculated > ecc data to handle bit flips in erased pages. > > If that is the only reason, whether same logic can go for same ECC calculation > (remove modification of calculated ecc in case of software ecc correction) > by adding an extra byte (0) in spare area to handle erased pages. > > So can you share if I am missing something? Yes, the only reason why a constant polynomial is added to hw-generated ECC bytes is to transparently handle bitflips in erased pages. Handling erased pages this way has several benefits over the zero byte hack: - cleaner code, no checking of the zero byte - no expensive scan of data+spare area when reading an erased block: this step can significantly slow down the initial UBI scan (lots of erased pages to read) - no need to worry about the (very unlikely) possibility of having more than 4 bitflips in the zero byte OTOH, having the same ECC codes for both ELM and non-ELM chips with RBL compatibility sounds nice and would also simplify things. Note: on platforms where we use SW BCH correction, we also use the MLC OMAP boot mode, which is more robust and not compatible with 8-bit/4-bit BCH layouts. I don't know which way is better for the OMAP community: 1. Unifying ECC modes = loosing the constant polynomial benefits, but gaining RBL compat and simplifying code 2. Keeping separate ECC modes = code bloat Tony, do you have an opinion on this ? BTW, Afzal is submitting a series of patches [1] which are not compatible with your series; is there any plan to merge your patches ? BR, -- Ivan [1] http://lists.infradead.org/pipermail/linux-mtd/2012-October/044374.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/