Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759242Ab2JKTD5 (ORCPT ); Thu, 11 Oct 2012 15:03:57 -0400 Received: from mail-ie0-f174.google.com ([209.85.223.174]:36138 "EHLO mail-ie0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759212Ab2JKTDw (ORCPT ); Thu, 11 Oct 2012 15:03:52 -0400 From: Matt Porter To: Tony Lindgren , Sekhar Nori , Grant Likely , Mark Brown , Benoit Cousson , Russell King , Vinod Koul , Rob Landley , Chris Ball Cc: Devicetree Discuss , Linux OMAP List , Linux ARM Kernel List , Linux DaVinci Kernel List , Linux Kernel Mailing List , Linux Documentation List , Linux MMC List , Linux SPI Devel List , Arnd Bergmann , Dan Williams , Rob Herring Subject: [RFC PATCH v2 01/16] dmaengine: edma: fix slave config dependency on direction Date: Thu, 11 Oct 2012 15:04:26 -0400 Message-Id: <1349982281-10785-2-git-send-email-mporter@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1349982281-10785-1-git-send-email-mporter@ti.com> References: <1349982281-10785-1-git-send-email-mporter@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4563 Lines: 147 The edma_slave_config() implementation depends on the direction field such that it will not properly configure a slave channel when called without direction set. This fixes the implementation so that the slave config is copied as is and prep_slave_sg() handles the direction dependent handling. spi-omap2-mcspi and omap_hsmmc both expose this bug as they configure the slave channel config from a common path with an unconfigured direction field. Signed-off-by: Matt Porter --- drivers/dma/edma.c | 55 ++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 28 deletions(-) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 05aea3c..fdcf079 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -69,9 +69,7 @@ struct edma_chan { int ch_num; bool alloced; int slot[EDMA_MAX_SLOTS]; - dma_addr_t addr; - int addr_width; - int maxburst; + struct dma_slave_config cfg; }; struct edma_cc { @@ -178,29 +176,14 @@ static int edma_terminate_all(struct edma_chan *echan) return 0; } - static int edma_slave_config(struct edma_chan *echan, - struct dma_slave_config *config) + struct dma_slave_config *cfg) { - if ((config->src_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) || - (config->dst_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)) + if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) return -EINVAL; - if (config->direction == DMA_MEM_TO_DEV) { - if (config->dst_addr) - echan->addr = config->dst_addr; - if (config->dst_addr_width) - echan->addr_width = config->dst_addr_width; - if (config->dst_maxburst) - echan->maxburst = config->dst_maxburst; - } else if (config->direction == DMA_DEV_TO_MEM) { - if (config->src_addr) - echan->addr = config->src_addr; - if (config->src_addr_width) - echan->addr_width = config->src_addr_width; - if (config->src_maxburst) - echan->maxburst = config->src_maxburst; - } + memcpy(&echan->cfg, cfg, sizeof(echan->cfg)); return 0; } @@ -235,6 +218,9 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( struct edma_chan *echan = to_edma_chan(chan); struct device *dev = chan->device->dev; struct edma_desc *edesc; + dma_addr_t dev_addr; + enum dma_slave_buswidth dev_width; + u32 burst; struct scatterlist *sg; int i; int acnt, bcnt, ccnt, src, dst, cidx; @@ -243,7 +229,20 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( if (unlikely(!echan || !sgl || !sg_len)) return NULL; - if (echan->addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) { + if (direction == DMA_DEV_TO_MEM) { + dev_addr = echan->cfg.src_addr; + dev_width = echan->cfg.src_addr_width; + burst = echan->cfg.src_maxburst; + } else if (direction == DMA_MEM_TO_DEV) { + dev_addr = echan->cfg.dst_addr; + dev_width = echan->cfg.dst_addr_width; + burst = echan->cfg.dst_maxburst; + } else { + dev_err(dev, "%s: bad direction?\n", __func__); + return NULL; + } + + if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) { dev_err(dev, "Undefined slave buswidth\n"); return NULL; } @@ -275,14 +274,14 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( } } - acnt = echan->addr_width; + acnt = dev_width; /* * If the maxburst is equal to the fifo width, use * A-synced transfers. This allows for large contiguous * buffer transfers using only one PaRAM set. */ - if (echan->maxburst == 1) { + if (burst == 1) { edesc->absync = false; ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1); bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1); @@ -302,7 +301,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( */ } else { edesc->absync = true; - bcnt = echan->maxburst; + bcnt = burst; ccnt = sg_dma_len(sg) / (acnt * bcnt); if (ccnt > (SZ_64K - 1)) { dev_err(dev, "Exceeded max SG segment size\n"); @@ -313,13 +312,13 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( if (direction == DMA_MEM_TO_DEV) { src = sg_dma_address(sg); - dst = echan->addr; + dst = dev_addr; src_bidx = acnt; src_cidx = cidx; dst_bidx = 0; dst_cidx = 0; } else { - src = echan->addr; + src = dev_addr; dst = sg_dma_address(sg); src_bidx = 0; src_cidx = 0; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/