From: Jaegeuk Kim <jaegeuk.kim@samsung.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
        gregkh@linuxfoundation.org, viro@zeniv.linux.org.uk, arnd@arndb.de,
        tytso@mit.edu, chur.lee@samsung.com, cm224.lee@samsung.com,
        jooyoung.hwang@samsung.com
References: <001001cdb0c5$2ac96520$805c2f60$%kim@samsung.com>
In-reply-to: <001001cdb0c5$2ac96520$805c2f60$%kim@samsung.com>
Subject: [PATCH 01/16 v2] f2fs: add document
Date: Tue, 23 Oct 2012 11:25:11 +0900
Message-id: <001101cdb0c5$a1052fd0$e30f8f70$%kim@samsung.com>
MIME-version: 1.0
Content-type: text/plain; charset=UTF-8
Content-transfer-encoding: 8BIT
Thread-index: Ac2wxSqFSBGNbwToQsqWze4D+LI2xQAAFr0Q
Content-language: ko
DLP-Filter: Pass
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 20570
Lines: 450

This adds a document describing the mount options, proc entries, usage, and
design of Flash-Friendly File System, namely F2FS.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
---
 Documentation/filesystems/00-INDEX |    2 +
 Documentation/filesystems/f2fs.txt |  404 ++++++++++++++++++++++++++++++++++++
 2 files changed, 406 insertions(+)
 create mode 100644 Documentation/filesystems/f2fs.txt

diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 8c624a1..ce5fd46 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -48,6 +48,8 @@ ext4.txt
 	- info, mount options and specifications for the Ext4 filesystem.
 files.txt
 	- info on file management in the Linux kernel.
+f2fs.txt
+	- info and mount options for the F2FS filesystem.
 fuse.txt
 	- info on the Filesystem in User SpacE including mount options.
 gfs2.txt
diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt
new file mode 100644
index 0000000..f2b4fde
--- /dev/null
+++ b/Documentation/filesystems/f2fs.txt
@@ -0,0 +1,404 @@
+================================================================================
+WHAT IS Flash-Friendly File System (F2FS)?
+================================================================================
+
+NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have
+been widely being used for storage ranging from mobile to server systems. Since
+they are known to have different characteristics from the conventional rotating
+disks, a file system, an upper layer to the storage device, should adapt to the
+changes from the sketch in the design level.
+
+F2FS is a file system exploiting NAND flash memory-based storage devices, which
+is based on Log-structured File System (LFS). The design has been focused on
+addressing the fundamental issues in LFS, which are snowball effect of wandering
+tree and high cleaning overhead.
+
+Since a NAND flash memory-based storage device shows different characteristic
+according to its internal geometry or flash memory management scheme, namely FTL,
+F2FS and its tools support various parameters not only for configuring on-disk
+layout, but also for selecting allocation and cleaning algorithms.
+
+The file system formatting tool, "mkfs.f2fs", is available from the following
+download page:		http://sourceforge.net/projects/f2fs-tools/
+
+================================================================================
+BACKGROUND AND DESIGN ISSUES
+================================================================================
+
+Log-structured File System (LFS)
+--------------------------------
+"A log-structured file system writes all modifications to disk sequentially in
+a log-like structure, thereby speeding up  both file writing and crash recovery.
+The log is the only structure on disk; it contains indexing information so that
+files can be read back from the log efficiently. In order to maintain large free
+areas on disk for fast writing, we divide  the log into segments and use a
+segment cleaner to compress the live information from heavily fragmented
+segments." from Rosenblum, M. and Ousterhout, J. K., 1992, "The design and
+implementation of a log-structured file system", ACM Trans. Computer Systems
+10, 1, 26–52.
+
+Wandering Tree Problem
+----------------------
+In LFS, when a file data is updated and written to the end of log, its direct
+pointer block is updated due to the changed location. Then the indirect pointer
+block is also updated due to the direct pointer block update. In this manner,
+the upper index structures such as inode, inode map, and checkpoint block are
+also updated recursively. This problem is called as wandering tree problem [1],
+and in order to enhance the performance, it should eliminate or relax the update
+propagation as much as possible.
+
+[1] Bityutskiy, A. 2005. JFFS3 design issues. http://www.linux-mtd.infradead.org/
+
+Cleaning Overhead
+-----------------
+Since LFS is based on out-of-place writes, it produces so many obsolete blocks
+scattered across the whole storage. In order to serve new empty log space, it
+needs to reclaim these obsolete blocks seamlessly to users. This job is called
+as a cleaning process.
+
+The process consists of three operations as follows.
+1. A victim segment is selected through referencing segment usage table.
+2. It loads parent index structures of all the data in the victim identified by
+   segment summary blocks.
+3. It checks the cross-reference between the data and its parent index structure.
+4. It moves valid data selectively.
+
+This cleaning job may cause unexpected long delays, so the most important goal
+is to hide the latencies to users. And also definitely, it should reduce the
+amount of valid data to be moved, and move them quickly as well.
+
+================================================================================
+KEY FEATURES
+================================================================================
+
+Flash Awareness
+---------------
+- Enlarge the random write area for better performance, but provide the high
+  spatial locality
+- Align FS data structures to the operational units in FTL as best efforts
+
+Wandering Tree Problem
+----------------------
+- Use a term, “node”, that represents inodes as well as various pointer blocks
+- Introduce Node Address Table (NAT) containing the locations of all the “node”
+  blocks; this will cut off the update propagation.
+
+Cleaning Overhead
+-----------------
+- Support a background cleaning process
+- Support greedy and cost-benefit algorithms for victim selection policies
+- Support multi-head logs for static/dynamic hot and cold data separation
+- Introduce adaptive logging for efficient block allocation
+
+================================================================================
+MOUNT OPTIONS
+================================================================================
+
+background_gc_off      Turn off cleaning operations, namely garbage collection,
+		       triggered in background when I/O subsystem is idle.
+disable_roll_forward   Disable the roll-forward recovery routine
+discard                Issue discard/TRIM commands when a segment is cleaned.
+no_heap                Disable heap-style segment allocation which finds free
+                       segments for data from the beginning of main area, while
+		       for node from the end of main area.
+nouser_xattr           Disable Extended User Attributes. Note: xattr is enabled
+                       by default if CONFIG_F2FS_FS_XATTR is selected.
+noacl                  Disable POSIX Access Control List. Note: acl is enabled
+                       by default if CONFIG_F2FS_FS_POSIX_ACL is selected.
+active_logs=%u         Support configuring the number of active logs. In the
+                       current design, f2fs supports only 2, 4, and 6 logs.
+                       Default number is 6.
+disable_ext_identify   Disable the extension list configured by mkfs, so f2fs
+                       does not aware of cold files such as media files.
+
+================================================================================
+PROC ENTRIES
+================================================================================
+
+/proc/fs/f2fs/ contains information about partitions mounted as f2fs. For each
+partition, a corresponding directory, named as its device name, is provided with
+the following proc entries.
+
+- f2fs_stat	major file system information managed by f2fs currently
+- f2fs_sit_stat	average utilization information of the whole segments
+- f2fs_mem_stat	current memory footprint consumed by f2fs
+
+e.g., in /proc/fs/f2fs/sdb1/
+
+================================================================================
+USAGE
+================================================================================
+
+1. Download userland tools
+
+2. Insmod f2fs.ko module:
+ # insmod f2fs.ko
+
+3. Check the directory trying to mount
+ # mkdir /mnt/f2fs
+
+4. Format the block device, and then mount as f2fs
+ # mkfs.f2fs -l label /dev/block_device
+ # mount -t f2fs /dev/block_device /mnt/f2fs
+
+Mount options
+-------------
+-l [label]   : Give a volume label, up to 256 unicode name.
+-a [0 or 1]  : Split start location of each area for heap-based allocation.
+               1 is set by default, which performs this.
+-o [int]     : Set overprovision ratio in percent over volume size.
+               5 is set by default.
+-s [int]     : Set the number of segments per section.
+               1 is set by default.
+-z [int]     : Set the number of sections per zone.
+               1 is set by default.
+-e [str]     : Set basic extension list. e.g. "mp3,gif,mov"
+
+================================================================================
+DESIGN
+================================================================================
+
+On-disk Layout
+--------------
+
+F2FS divides the whole volume into a number of segments, each of which is 2MB in
+size by default. A section is composed of consecutive segments, and a zone
+consists of a set of sections.
+
+F2FS maintains logically six log areas. Except SB, all the log areas are managed
+in a unit of multiple segments. SB is located at the beginning of the partition,
+and there exist two superblocks to avoid file system crash. Other file system
+metadata such as CP, NAT, SIT, and SSA are located in the front part of the
+volume. Main area contains file and directory data including their indices.
+
+Each area manages the following contents.
+- CP		File system information, bitmaps for valid NAT/SIT sets, orphan
+		inode lists, and summary entries of current active segments.
+- NAT		Block address table for all the node blocks stored in Main area.
+- SIT		Segment information such as valid block count and bitmap for the
+		validity of all the blocks.
+- SSA		Summary entries which contains the owner information of all the
+		data and node blocks stored in Main area.
+- Main		Node and data blocks.
+
+In order to avoid misalignment between file system and flash-based storage, F2FS
+aligns the start block address of CP with the segment size. Also, it aligns the
+start block address of Main area with the zone size by reserving some segments
+in SSA area.
+
+                                            align with the zone size <-|
+                 |-> align with the segment size
+     _________________________________________________________________________
+    |            |            |    Node     |   Segment   |   Segment  |      |
+    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |____________|_____2______|______N______|______N______|______N_____|__N___|
+                                                                       .      .
+                                                             .                .
+                                                 .                            .
+                                    ._________________________________________.
+                                    |_Segment_|_..._|_Segment_|_..._|_Segment_|
+                                    .           .
+                                    ._________._________
+                                    |_section_|__...__|_
+                                    .            .
+		                    .________.
+	                            |__zone__|
+
+
+File System Metadata Structure
+------------------------------
+
+F2FS adopts the checkpointing scheme to maintain file system consistency. At
+mount time, F2FS first tries to find the last valid checkpoint data by scanning
+CP area. In order to reduce the scanning time, F2FS uses only two copies of CP.
+One of them always indicates the last valid data, which is called as shadow copy
+mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism.
+
+For file system consistency, each CP points to which NAT and SIT copies are
+valid, as shown as below.
+
+  +--------+----------+---------+
+  |   CP   |    NAT   |   SIT   |
+  +--------+----------+---------+
+  .         .          .          .
+  .            .              .              .
+  .               .                 .                 .
+  +-------+-------+--------+--------+--------+--------+
+  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  +-------+-------+--------+--------+--------+--------+
+     |             ^                          ^
+     |             |                          |
+     `----------------------------------------'
+
+Index Structure
+---------------
+
+The key data structure to manage the data locations is a "node". Similar to
+traditional file structures, F2FS has three types of node: inode, direct node,
+indirect node. F2FS assigns 4KB to an inode block which contains 929 data block
+indices, two direct node pointers, two indirect node pointers, and one double
+indirect node pointer as described below. One direct node block contains 1018
+data blocks, and one indirect node block contains also 1018 node blocks. Thus,
+one inode block (i.e., a file) covers:
+
+  4KB * (927 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB.
+
+   Inode block (4KB)
+     |- data (927)
+     |- direct node (2)
+     |          `- data (1018)
+     |- indirect node (2)
+     |            `- direct node (1018)
+     |                       `- data (1018)
+     `- double indirect node (1)
+                         `- indirect node (1018)
+			              `- direct node (1018)
+	                                         `- data (1018)
+
+Note that, all the node blocks are mapped by NAT which means the location of
+each node is translated by the NAT table. In the consideration of the wandering
+tree problem, F2FS is able to cut off the propagation of node updates caused by
+leaf data writes.
+
+Directory Structure
+-------------------
+
+A directory entry occupies 11 bytes, which consists of the following attributes.
+
+- hash		hash value of the file name
+- ino		inode number
+- len		the length of file name
+- type		file type such as directory, symlink, etc
+
+A dentry block consists of 214 dentry slots and file names. Therein a bitmap is
+used to represent whether each dentry is valid or not. A dentry block occupies
+4KB with the following composition.
+
+  Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) +
+	              dentries(11 * 214 bytes) + file name (8 * 214 bytes)
+
+                         [Bucket]
+             +--------------------------------+
+             |dentry block 1 | dentry block 2 |
+             +--------------------------------+
+             .               .
+       .                             .
+  .       [Dentry Block Structure: 4KB]       .
+  +--------+----------+----------+------------+
+  | bitmap | reserved | dentries | file names |
+  +--------+----------+----------+------------+
+  [Dentry Block: 4KB] .   .
+		 .               .
+            .                          .
+            +------+------+-----+------+
+            | hash | ino  | len | type |
+            +------+------+-----+------+
+            [Dentry Structure: 11 bytes]
+
+F2FS implements multi-level hash tables for directory structure. Each level has
+a hash table with dedicated number of hash buckets as shown below. Note that
+"A(2B)" means a bucket includes 2 data blocks.
+
+----------------------
+A : bucket
+B : block
+N : MAX_DIR_HASH_DEPTH
+----------------------
+
+level #0   | A(2B)
+           |
+level #1   | A(2B) - A(2B)
+           |
+level #2   | A(2B) - A(2B) - A(2B) - A(2B)
+     .     |   .       .       .       .
+level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
+     .     |   .       .       .       .
+level #N   | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
+
+The number of blocks and buckets are determined by,
+
+                            ,- 2, if n < MAX_DIR_HASH_DEPTH / 2,
+  # of blocks in level #n = |
+                            `- 4, Otherwise
+
+                             ,- 2^n, if n < MAX_DIR_HASH_DEPTH / 2,
+  # of buckets in level #n = |
+                             `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1), Otherwise
+
+When F2FS finds a file name in a directory, at first a hash value of the file
+name is calculated. Then, F2FS scans the hash table in level #0 to find the
+dentry consisting of the file name and its inode number. If not found, F2FS
+scans the next hash table in level #1. In this way, F2FS scans hash tables in
+each levels incrementally from 1 to N. In each levels F2FS needs to scan only
+one bucket determined by the following equation, which shows O(log(# of files))
+complexity.
+
+  bucket number to scan in level #n = (hash value) % (# of buckets in level #n)
+
+In the case of file creation, F2FS finds empty consecutive slots that cover the
+file name. F2FS searches the empty slots in the hash tables of whole levels from
+1 to N in the same way as the lookup operation.
+
+The following figure shows an example of two cases holding children.
+       --------------> Dir <--------------
+       |                                 |
+    child                             child
+
+    child - child                     [hole] - child
+
+    child - child - child             [hole] - [hole] - child
+
+   Case 1:                           Case 2:
+   Number of children = 6,           Number of children = 3,
+   File size = 7                     File size = 7
+
+Default Block Allocation
+------------------------
+
+At runtime, F2FS manages six active logs inside "Main" area: Hot/Warm/Cold node
+and Hot/Warm/Cold data.
+
+- Hot node	contains direct node blocks of directories.
+- Warm node	contains direct node blocks except hot node blocks.
+- Cold node	contains indirect node blocks
+- Hot data	contains dentry blocks
+- Warm data	contains data blocks except hot and cold data blocks
+- Cold data	contains multimedia data or migrated data blocks
+
+LFS has two schemes for free space management: threaded log and copy-and-compac-
+tion. The copy-and-compaction scheme which is known as cleaning, is well-suited
+for devices showing very good sequential write performance, since free segments
+are served all the time for writing new data. However, it suffers from cleaning
+overhead under high utilization. Contrarily, the threaded log scheme suffers
+from random writes, but no cleaning process is needed. F2FS adopts a hybrid
+scheme where the copy-and-compaction scheme is adopted by default, but the
+policy is dynamically changed to the threaded log scheme according to the file
+system status.
+
+In order to align F2FS with underlying flash-based storage, F2FS allocates a
+segment in a unit of section. F2FS expects that the section size would be the
+same as the unit size of garbage collection in FTL. Furthermore, with respect
+to the mapping granularity in FTL, F2FS allocates each section of the active
+logs from different zones as much as possible, since FTL can write the data in
+the active logs into one allocation unit according to its mapping granularity.
+
+Cleaning process
+----------------
+
+F2FS does cleaning both on demand and in the background. On-demand cleaning is
+triggered when there are not enough free segments to serve VFS calls. Background
+cleaner is operated by a kernel thread, and triggers the cleaning job when the
+system is idle.
+
+F2FS supports two victim selection policies: greedy and cost-benefit algorithms.
+In the greedy algorithm, F2FS selects a victim segment having the smallest number
+of valid blocks. In the cost-benefit algorithm, F2FS selects a victim segment
+according to the segment age and the number of valid blocks in order to address
+log block thrashing problem in the greedy algorithm. F2FS adopts the greedy
+algorithm for on-demand cleaner, while background cleaner adopts cost-benefit
+algorithm.
+
+In order to identify whether the data in the victim segment are valid or not,
+F2FS manages a bitmap. Each bit represents the validity of a block, and the
+bitmap is composed of a bit stream covering whole blocks in main area.
-- 
1.7.9.5


---
Jaegeuk Kim
Samsung


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/