Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965511Ab2JWU7q (ORCPT ); Tue, 23 Oct 2012 16:59:46 -0400 Received: from smtp.outflux.net ([198.145.64.163]:55348 "EHLO smtp.outflux.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933717Ab2JWUFO (ORCPT ); Tue, 23 Oct 2012 16:05:14 -0400 From: Kees Cook To: linux-kernel@vger.kernel.org Cc: Kees Cook , Russell King Subject: [PATCH 007/193] arch/arm: remove CONFIG_EXPERIMENTAL Date: Tue, 23 Oct 2012 13:01:20 -0700 Message-Id: <1351022666-6960-8-git-send-email-keescook@chromium.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1351022666-6960-1-git-send-email-keescook@chromium.org> References: <1351022666-6960-1-git-send-email-keescook@chromium.org> X-HELO: www.outflux.net Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6501 Lines: 187 This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Russell King Signed-off-by: Kees Cook --- arch/arm/Kconfig | 51 +++++++++++++++++++++++------------------------- arch/arm/Kconfig.debug | 4 ++-- 2 files changed, 26 insertions(+), 29 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..7048415 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1519,8 +1519,7 @@ config SMP If you don't know what to do here, say N. config SMP_ON_UP - bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Allow booting SMP kernel on uniprocessor systems" depends on SMP && !XIP_KERNEL default y help @@ -1603,8 +1602,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1645,8 +1644,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1707,8 +1706,8 @@ config AEABI To use this you need GCC version 4.0.0 or later. config OABI_COMPAT - bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL + bool "Allow old ABI binaries to run with this kernel" + depends on AEABI && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the @@ -1831,8 +1830,7 @@ config SECCOMP defined by each seccomp mode. config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Enable -fstack-protector buffer overflow detection" help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on @@ -1916,8 +1914,8 @@ config ZBOOT_ROM (zImage) directly from ROM or flash. If unsure, say N. choice - prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + prompt "Include SD/MMC loader in zImage" + depends on ZBOOT_ROM && ARCH_SH7372 default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. @@ -1928,25 +1926,25 @@ choice rest the kernel image to RAM. config ZBOOT_ROM_NONE - bool "No SD/MMC loader in zImage (EXPERIMENTAL)" + bool "No SD/MMC loader in zImage" help Do not load image from SD or MMC config ZBOOT_ROM_MMCIF - bool "Include MMCIF loader in zImage (EXPERIMENTAL)" + bool "Include MMCIF loader in zImage" help Load image from MMCIF hardware block. config ZBOOT_ROM_SH_MOBILE_SDHI - bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" + bool "Include SuperH Mobile SDHI loader in zImage" help Load image from SDHI hardware block endchoice config ARM_APPENDED_DTB - bool "Use appended device tree blob to zImage (EXPERIMENTAL)" - depends on OF && !ZBOOT_ROM && EXPERIMENTAL + bool "Use appended device tree blob to zImage" + depends on OF && !ZBOOT_ROM help With this option, the boot code will look for a device tree binary (DTB) appended to zImage @@ -2063,8 +2061,8 @@ config XIP_PHYS_ADDR own flash usage. config KEXEC - bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) + bool "Kexec system call" + depends on (!SMP || HOTPLUG_CPU) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2085,8 +2083,7 @@ config ATAGS_PROC file in procfs. Useful with kexec. config CRASH_DUMP - bool "Build kdump crash kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Build kdump crash kernel" help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are @@ -2152,8 +2149,8 @@ config CPU_FREQ_S3C Internal configuration node for common cpufreq on Samsung SoC config CPU_FREQ_S3C24XX - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL + bool "CPUfreq driver for Samsung S3C24XX series CPUs" + depends on ARCH_S3C24XX && CPU_FREQ select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family @@ -2164,8 +2161,8 @@ config CPU_FREQ_S3C24XX If in doubt, say N. config CPU_FREQ_S3C24XX_PLL - bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX && EXPERIMENTAL + bool "Support CPUfreq changing of PLL frequency" + depends on CPU_FREQ_S3C24XX help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle @@ -2227,8 +2224,8 @@ config FPE_NWFPE_XP You almost surely want to say N here. config FPE_FASTFPE - bool "FastFPE math emulation (EXPERIMENTAL)" - depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL + bool "FastFPE math emulation" + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 ---help--- Say Y here to include the FAST floating point emulator in the kernel. This is an experimental much faster emulator which now also has full diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b0f3857..98e4bfb 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -31,8 +31,8 @@ config FRAME_POINTER reported is severely limited. config ARM_UNWIND - bool "Enable stack unwinding support (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + bool "Enable stack unwinding support" + depends on AEABI default y help This option enables stack unwinding support in the kernel -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/