Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758716Ab2JXTWA (ORCPT ); Wed, 24 Oct 2012 15:22:00 -0400 Received: from mail-vb0-f46.google.com ([209.85.212.46]:42336 "EHLO mail-vb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758290Ab2JXTV5 (ORCPT ); Wed, 24 Oct 2012 15:21:57 -0400 Date: Wed, 24 Oct 2012 15:22:50 -0400 (EDT) From: Vince Weaver To: Namhyung Kim cc: linux-man@vger.kernel.org, linux-perf-users@vger.kernel.org, linux-kernel@vger.kernel.org, "Michael Kerrisk (man-pages)" , Stephane Eranian , Peter Zijlstra , Paul Mackerras , Ingo Molnar , Arnaldo Carvalho de Melo Subject: Re: [RFC] perf: proposed perf_event_open() manpage In-Reply-To: Message-ID: References: <878vaw9x6x.fsf@sejong.aot.lge.com> User-Agent: Alpine 2.02 (DEB 1266 2009-07-14) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44258 Lines: 1828 below is an updated version of the manpage. It has the changes you suggested plus a few other additions. Please verify the "sample_type" changes. I did some digging in the kernel source and added some info to some of the descriptions. I also added /proc/sys/kernel/ and /sys/bus/event_source/devices/ subsections near the end to document the files pertaining to perf_event. Thanks Vince Weaver vincent.weaver@maine.edu .\" Hey Emacs! This file is -*- nroff -*- source. .\" .\" Copyright (c) 2012, Vincent Weaver .\" .\" This is free documentation; you can redistribute it and/or .\" modify it under the terms of the GNU General Public License as .\" published by the Free Software Foundation; either version 2 of .\" the License, or (at your option) any later version. .\" .\" The GNU General Public License's references to "object code" .\" and "executables" are to be interpreted as the output of any .\" document formatting or typesetting system, including .\" intermediate and printed output. .\" .\" This manual is distributed in the hope that it will be useful, .\" but WITHOUT ANY WARRANTY; without even the implied warranty of .\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the .\" GNU General Public License for more details. .\" .\" You should have received a copy of the GNU General Public .\" License along with this manual; if not, see .\" . .\" .\" This document is based on the perf_event.h header file, the .\" tools/perf/design.txt file, and a lot of bitter experience. .\" .TH PERF_EVENT_OPEN 2 2012-10-24 "Linux" "Linux Programmer's Manual" .SH NAME perf_event_open \- set up performance monitoring .SH SYNOPSIS .nf .B #include .B #include .sp .BI "int perf_event_open(struct perf_event_attr *" attr , .BI " pid_t " pid ", int " cpu ", int " group_fd , .BI " unsigned long " flags ); .fi .IR Note : There is no glibc wrapper for this system call; see NOTES. .SH DESCRIPTION Given a list of parameters, .BR perf_event_open () returns a file descriptor, for use in subsequent system calls .RB ( read "(2), " mmap "(2), " prctl "(2), " fcntl "(2), etc.)." .PP A call to .BR perf_event_open () creates a file descriptor that allows measuring performance information. Each file descriptor corresponds to one event that is measured; these can be grouped together to measure multiple events simultaneously. .PP Events can be enabled and disabled in two ways: via .BR ioctl (2) and via .BR prctl (2) . When an event is disabled it does not count or generate overflows but does continue to exist and maintain its count value. Events come in two flavors: counting and sampled. A .I counting event is one that is used for counting the aggregate number of events that occur. In general, counting event results are gathered with a .BR read (2) call. A .I sampling event periodically writes measurements to a buffer that can then be accessed via .BR mmap (2) . .SS Arguments .P The argument .I pid allows events to be attached to processes in various ways. If .I pid is 0, measurements happen on the current task, if .I pid is greater than 0, the process indicated by .I pid is measured, and if .I pid is \-1, all processes are counted. The .I cpu argument allows measurements to be specific to a CPU. If .I cpu is greater than or equal to 0, measurements are restricted to the specified CPU; if .I cpu is \-1, the events are measured on all CPUs. .P Note that the combination of .IR pid " == \-1" and .IR cpu " == \-1" is not valid. .P A .IR pid " > 0" and .IR cpu " == \-1" setting measures per-process and follows that process to whatever CPU the process gets scheduled to. Per-process events can be created by any user. .P A .IR pid " == \-1" and .IR cpu " >= 0" setting is per-CPU and measures all processes on the specified CPU. Per-CPU events need the .B CAP_SYS_ADMIN capability or a .I /proc/sys/kernel/perf_event_paranoid value of less than 1. .P The .I group_fd argument allows counter groups to be set up. A counter group has one counter which is the group leader. The leader is created first, with .IR group_fd " = \-1" in the .BR perf_event_open () call that creates it. The rest of the group members are created subsequently, with .IR group_fd giving the fd of the group leader. (A single counter on its own is created with .IR group_fd " = \-1" and is considered to be a group with only 1 member.) .P A counter group is scheduled onto the CPU as a unit: it will only be put onto the CPU if all of the counters in the group can be put onto the CPU. This means that the values of the member counters can be meaningfully compared, added, divided (to get ratios), etc., with each other, since they have counted events for the same set of executed instructions. .P The .I flags argument takes one of the following values: .TP .BR PERF_FLAG_FD_NO_GROUP .\" FIXME The following sentence is unclear This flag allows creating an event as part of an event group but having no group leader. It is unclear why this is useful. .\" FIXME So, why is it useful? .TP .BR PERF_FLAG_FD_OUTPUT This flag re-routes the output from an event to the group leader. .TP .BR PERF_FLAG_PID_CGROUP " (Since Linux 2.6.39)." This flag activates per-container system-wide monitoring. A container is an abstraction that isolates a set of resources for finer grain control (CPUs, memory, etc...). In this mode, the event is measured only if the thread running on the monitored CPU belongs to the designated container (cgroup). The cgroup is identified by passing a file descriptor opened on its directory in the cgroupfs filesystem. For instance, if the cgroup to monitor is called .IR test , then a file descriptor opened on .I /dev/cgroup/test (assuming cgroupfs is mounted on .IR /dev/cgroup ) must be passed as the .I pid parameter. cgroup monitoring is only available for system-wide events and may therefore require extra permissions. .P The .I perf_event_attr structure is what is passed into the .BR perf_event_open () syscall. It is large and has a complicated set of dependent fields. .in +4n .nf struct perf_event_attr { __u32 type; /* Type of event */ __u32 size; /* Size of attribute structure */ __u64 config; /* Type-specific configuration */ union { __u64 sample_period; /* Period of sampling */ __u64 sample_freq; /* Frequency of sampling */ }; __u64 sample_type; /* Specifies values included in sample */ __u64 read_format; /* Specifies values returned in read */ __u64 disabled : 1, /* off by default */ inherit : 1, /* children inherit it */ pinned : 1, /* must always be on PMU */ exclusive : 1, /* only group on PMU */ exclude_user : 1, /* don't count user */ exclude_kernel : 1, /* don't count kernel */ exclude_hv : 1, /* don't count hypervisor */ exclude_idle : 1, /* don't count when idle */ mmap : 1, /* include mmap data */ comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ inherit_stat : 1, /* per task counts */ enable_on_exec : 1, /* next exec enables */ task : 1, /* trace fork/exit */ watermark : 1, /* wakeup_watermark */ precise_ip : 2, /* skid constraint */ mmap_data : 1, /* non-exec mmap data */ sample_id_all : 1, /* sample_type all events */ exclude_host : 1, /* don't count in host */ exclude_guest : 1, /* don't count in guest */ __reserved_1 : 43; union { __u32 wakeup_events; /* wakeup every n events */ __u32 wakeup_watermark; /* bytes before wakeup */ }; __u32 bp_type; /* breakpoint type */ union { __u64 bp_addr; /* breakpoint address */ __u64 config1; /* extension of config */ }; union { __u64 bp_len; /* breakpoint length */ __u64 config2; /* extension of config1 */ }; __u64 branch_sample_type; /* enum branch_sample_type */ }; .fi .in The fields of the .I perf_event_attr structure are described in more detail below. .TP .I type This field specifies the overall event type. It has one of the following values: .RS .TP .B PERF_TYPE_HARDWARE This indicates one of the "generalized" hardware events provided by the kernel. See the .I config field definition for more details. .TP .B PERF_TYPE_SOFTWARE This indicates one of the software-defined events provided by the kernel (even if no hardware support is available). .TP .B PERF_TYPE_TRACEPOINT This indicates a tracepoint provided by the kernel tracepoint infrastructure. .TP .B PERF_TYPE_HW_CACHE This indicates a hardware cache event. This has a special encoding, described in the .I config field definition. .TP .B PERF_TYPE_RAW This indicates a "raw" implementation-specific event in the .IR config " field." .TP .BR PERF_TYPE_BREAKPOINT " (Since Linux 2.6.33)" This indicates a hardware breakpoint as provided by the CPU. Breakpoints can be read/write accesses to an address as well as execution of an instruction address. .TP .RB "dynamic PMU" Since Linux 2.6.39, .BR perf_event_open() can support multiple PMUs. To enable this, a value exported by the kernel can be used in the .I type field to indicate which PMU to use. The value to use can be found in the sysfs filesystem: there is a subdirectory per PMU instance under .IR /sys/bus/event_source/devices . In each sub-directory there is a .I type file whose content is an integer that can be used in the .I type field. For instance, .I /sys/bus/event_source/devices/cpu/type contains the value for the core CPU PMU, which is usually 4. .RE .TP .I "size" The size of the .I perf_event_attr structure for forward/backward compatibility. Set this using .I sizeof(struct perf_event_attr) to allow the kernel to see the struct size at the time of compilation. The related define .B PERF_ATTR_SIZE_VER0 is set to 64; this was the size of the first published struct. .B PERF_ATTR_SIZE_VER1 is 72, corresponding to the addition of breakpoints in Linux 2.6.33. .B PERF_ATTR_SIZE_VER2 is 80 corresponding to the addition of branch sampling in Linux 3.4. .TP .I "config" This specifies which event you want, in conjunction with the .I type field. The .IR config1 " and " config2 fields are also taken into account in cases where 64 bits is not enough to fully specify the event. The encoding of these fields are event dependent. The most significant bit (bit 63) of .I config signifies CPU-specific (raw) counter configuration data; if the most significant bit is unset, the next 7 bits are an event type and the rest of the bits are the event identifier. There are various ways to set the .I config field that are dependent on the value of the previously described .I type field. What follows are various possible settings for .I config separated out by .IR type . If .I type is .BR PERF_TYPE_HARDWARE , we are measuring one of the generalized hardware CPU events. Not all of these are available on all platforms. Set .I config to one of the following: .RS 12 .TP .B PERF_COUNT_HW_CPU_CYCLES Total cycles. Be wary of what happens during CPU frequency scaling .TP .B PERF_COUNT_HW_INSTRUCTIONS Retired instructions. Be careful, these can be affected by various issues, most notably hardware interrupt counts .TP .B PERF_COUNT_HW_CACHE_REFERENCES Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include prefetches and coherency messages; again this depends on the design of your CPU. .TP .B PERF_COUNT_HW_CACHE_MISSES Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the .B PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. .TP .B PERF_COUNT_HW_BRANCH_INSTRUCTIONS Retired branch instructions. Prior to Linux 2.6.34, this used the wrong event on AMD processors. .TP .B PERF_COUNT_HW_BRANCH_MISSES Mispredicted branch instructions. .TP .B PERF_COUNT_HW_BUS_CYCLES Bus cycles, which can be different from total cycles. .TP .BR PERF_COUNT_HW_STALLED_CYCLES_FRONTEND " (Since Linux 3.0)" Stalled cycles during issue. .TP .BR PERF_COUNT_HW_STALLED_CYCLES_BACKEND " (Since Linux 3.0)" Stalled cycles during retirement. .TP .BR PERF_COUNT_HW_REF_CPU_CYCLES " (Since Linux 3.3)" Total cycles; not affected by CPU frequency scaling. .RE .IP If .I type is .BR PERF_TYPE_SOFTWARE , we are measuring software events provided by the kernel. Set .I config to one of the following: .RS 12 .TP .B PERF_COUNT_SW_CPU_CLOCK This reports the CPU clock, a high-resolution per-CPU timer. .TP .B PERF_COUNT_SW_TASK_CLOCK This reports a clock count specific to the task that is running. .TP .B PERF_COUNT_SW_PAGE_FAULTS This reports the number of page faults. .TP .B PERF_COUNT_SW_CONTEXT_SWITCHES This counts context switches. Until Linux 2.6.34, these were all reported as user-space events, after that they are reported as happening in the kernel. .TP .B PERF_COUNT_SW_CPU_MIGRATIONS This reports the number of times the process has migrated to a new CPU. .TP .B PERF_COUNT_SW_PAGE_FAULTS_MIN This counts the number of minor page faults. These did not require disk I/O to handle. .TP .B PERF_COUNT_SW_PAGE_FAULTS_MAJ This counts the number of major page faults. These required disk I/O to handle. .TP .BR PERF_COUNT_SW_ALIGNMENT_FAULTS " (Since Linux 2.6.33)" This counts the number of alignment faults. These happen when unaligned memory accesses happen; the kernel can handle these but it reduces performance. This only happens on some architectures (never on x86). .TP .BR PERF_COUNT_SW_EMULATION_FAULTS " (Since Linux 2.6.33)" This counts the number of emulation faults. The kernel sometimes traps on unimplemented instructions and emulates them for userspace. This can negatively impact performance. .RE .RE .RS If .I type is .BR PERF_TYPE_TRACEPOINT , then we are measuring kernel tracepoints. The value to use in .I config can be obtained from under debugfs .I tracing/events/*/*/id if ftrace is enabled in the kernel. .RE .RS If .I type is .BR PERF_TYPE_HW_CACHE , then we are measuring a hardware CPU cache event. To calculate the appropriate .I config value use the following equation: .RS 4 .nf (perf_hw_cache_id) | (perf_hw_cache_op_id << 8) | (perf_hw_cache_op_result_id << 16) .fi .P where .I perf_hw_cache_id is one of: .RS .TP .B PERF_COUNT_HW_CACHE_L1D for measuring Level 1 Data Cache .TP .B PERF_COUNT_HW_CACHE_L1I for measuring Level 1 Instruction Cache .TP .B PERF_COUNT_HW_CACHE_LL for measuring Last-Level Cache .TP .B PERF_COUNT_HW_CACHE_DTLB for measuring the Data TLB .TP .B PERF_COUNT_HW_CACHE_ITLB for measuring the Instruction TLB .TP .B PERF_COUNT_HW_CACHE_BPU for measuring the branch prediction unit .TP .BR PERF_COUNT_HW_CACHE_NODE " (Since Linux 3.0)" for measuring local memory accesses .RE .P and .I perf_hw_cache_op_id is one of .RS .TP .B PERF_COUNT_HW_CACHE_OP_READ for read accesses .TP .B PERF_COUNT_HW_CACHE_OP_WRITE for write accesses .TP .B PERF_COUNT_HW_CACHE_OP_PREFETCH for prefetch accesses .RE .P and .I perf_hw_cache_op_result_id is one of .RS .TP .B PERF_COUNT_HW_CACHE_RESULT_ACCESS to measure accesses .TP .B PERF_COUNT_HW_CACHE_RESULT_MISS to measure misses .RE .RE If .I type is .BR PERF_TYPE_RAW , then a custom "raw" .I config value is needed. Most CPUs support events that are not covered by the "generalized" events. These are implementation defined; see your CPU manual (for example the Intel Volume 3B documentation or the AMD BIOS and Kernel Developer Guide). The libpfm4 library can be used to translate from the name in the architectural manuals to the raw hex value .BR perf_event_open () expects in this field. If .I type is .BR PERF_TYPE_BREAKPOINT , then leave .I config set to zero. Its parameters are set in other places. .RE .TP .IR sample_period ", " sample_freq A "sampling" counter is one that generates an interrupt every N events, where N is given by .IR sample_period . A sampling counter has .IR sample_period " > 0." When an overflow interrupt occurs, requested data is recorded in the mmap buffer. The .I sample_type field controls what data is recorded on each interrupt. .I sample_freq can be used if you wish to use frequency rather than period. In this case you set the .I freq flag. The kernel will adjust the sampling period to try and achieve the desired rate. The rate of adjustment is a timer tick. .TP .I "sample_type" The various bits in this field specify which values to include in the sample. They will be recorded in a ring-buffer, which is available to user-space using .BR mmap (2). The order in which the values are saved in the sample are documented in the MMAP Layout subsection below; it is not the .I "enum perf_event_sample_format" order. .RS .TP .B PERF_SAMPLE_IP instruction pointer .TP .B PERF_SAMPLE_TID thread id .TP .B PERF_SAMPLE_TIME time .TP .B PERF_SAMPLE_ADDR address .TP .B PERF_SAMPLE_READ record values for all events in a group, not just the group leader .TP .B PERF_SAMPLE_CALLCHAIN callchain (stack backtrace) .TP .B PERF_SAMPLE_ID a unique ID for the opened event. If the event is a member of an event group, the group leader ID is returned. This ID is the same as the one returned by PERF_FORMAT_ID. .TP .B PERF_SAMPLE_CPU cpu number .TP .B PERF_SAMPLE_PERIOD current sampling period .TP .B PERF_SAMPLE_STREAM_ID a unique ID for the opened event. Unlike .B PERF_SAMPLE_ID the actual ID is returned, not the group leader. This ID is the same as the one returned by PERF_FORMAT_ID. .TP .B PERF_SAMPLE_RAW additional data. Usually returned by tracepoint events. .TP .BR PERF_SAMPLE_BRANCH_STACK " (Since Linux 3.4)" requested branch stack. See branch_sample_type. .RE .TP .IR "read_format" This field specifies the format of the data returned by .BR read (2) on a .BR perf_event_open() file descriptor. .RS .TP .B PERF_FORMAT_TOTAL_TIME_ENABLED Adds the 64-bit "time_enabled" field. This can be used to calculate estimated totals if the PMU is overcommitted and multiplexing is happening. .TP .B PERF_FORMAT_TOTAL_TIME_RUNNING Adds the 64-bit "time_running" field. This can be used to calculate estimated totals if the PMU is overcommitted and multiplexing is happening. .TP .B PERF_FORMAT_ID Adds a 64-bit unique value that corresponds to the event-group. .TP .B PERF_FORMAT_GROUP Allows all counter values in an event-group to be read with one read. .RE .TP .IR "disabled" The .I disabled bit specifies whether the counter starts out disabled or enabled. If disabled, the event can later be enabled by .BR ioctl (2), .BR prctl (2), or .IR enable_on_exec . .TP .IR "inherit" The .I inherit bit specifies that this counter should count events of child tasks as well as the task specified. This only applies to new children, not to any existing children at the time the counter is created (nor to any new children of existing children). Inherit does not work for some combinations of .IR read_format s, such as .BR PERF_FORMAT_GROUP . .TP .IR "pinned" The .I pinned bit specifies that the counter should always be on the CPU if at all possible. It only applies to hardware counters and only to group leaders. If a pinned counter cannot be put onto the CPU (e.g., because there are not enough hardware counters or because of a conflict with some other event), then the counter goes into an 'error' state, where reads return end-of-file (i.e., .BR read (2) returns 0) until the counter is subsequently enabled or disabled. .TP .IR "exclusive" The .I exclusive bit specifies that when this counter's group is on the CPU, it should be the only group using the CPU's counters. In the future this may allow monitoring programs to support PMU features that need to run alone so that they do not disrupt other hardware counters. .TP .IR "exclude_user" If this bit is set, the count excludes events that happen in user-space. .TP .IR "exclude_kernel" If this bit is set, the count excludes events that happen in kernel-space. .TP .IR "exclude_hv" If this bit is set, the count excludes events that happen in the hypervisor. This is mainly for PMUs that have built-in support for handling this (such as POWER). Extra support is needed for handling hypervisor measurements on most machines. .TP .IR "exclude_idle" If set, don't count when the CPU is idle. .TP .IR "mmap" The .I mmap bit enables recording of extra information to a mmap'd ring-buffer. This is described below in subsection MMAP Layout. .TP .IR "comm" The .I comm bit enables tracking of process command name as modified by the .IR exec (2) and .IR prctl (PR_SET_NAME) system calls. Unfortunately for tools, there is no way to distinguish one system call versus the other. .TP .IR "freq" If this bit is set, then .I sample_frequency not .I sample_period is used when setting up the sampling interval. .TP .IR "inherit_stat" This bit enables saving of event counts on context switch for inherited tasks. This is only meaningful if the .I inherit field is set. .TP .IR "enable_on_exec" If this bit is set, a counter is automatically enabled after a call to .BR exec (2). .TP .IR "task" If this bit is set, then fork/exit notifications are included in the ring buffer. .TP .IR "watermark" If set, have a sampling interrupt happen when we cross the wakeup_watermark boundary. .TP .IR "precise_ip" " (Since Linux 2.6.35)" This controls the amount of skid. Skid is how many instructions execute between an event of interest happening and the kernel being able to stop and record the event. Smaller skid is better and allows more accurate reporting of which events correspond to which instructions, but hardware is often limited with how small this can be. The values of this are the following: .RS .TP 0 - .B SAMPLE_IP can have arbitrary skid .TP 1 - .B SAMPLE_IP must have constant skid .TP 2 - .B SAMPLE_IP requested to have 0 skid .TP 3 - .B SAMPLE_IP must have 0 skid. See also .BR PERF_RECORD_MISC_EXACT_IP . .RE .TP .IR "mmap_data" " (Since Linux 2.6.36)" Include mmap events in the ring_buffer. .TP .IR "sample_id_all" " (Since Linux 2.6.38)" If set, then all sample ID info (TID, TIME, ID, CPU, STREAM_ID) will be provided. .TP .IR "exclude_host" " (Since Linux 3.2)" Do not measure time spent in VM host .TP .IR "exclude_guest" " (Since Linux 3.2)" Do not measure time spent in VM guest .TP .IR "wakeup_events" ", " "wakeup_watermark" This union sets how many events .RI ( wakeup_events ) or bytes .RI ( wakeup_watermark ) happen before an overflow signal happens. Which one is used is selected by the .I watermark bitflag. .TP .IR "bp_type" " (Since Linux 2.6.33)" This chooses the breakpoint type. It is one of: .RS .TP .BR HW_BREAKPOINT_EMPTY no breakpoint .TP .BR HW_BREAKPOINT_R count when we read the memory location .TP .BR HW_BREAKPOINT_W count when we write the memory location .TP .BR HW_BREAKPOINT_RW count when we read or write the memory location .TP .BR HW_BREAKPOINT_X count when we execute code at the memory location .LP The values can be combined via a bitwsie or, but the combination of .B HW_BREAKPOINT_R or .B HW_BREAKPOINT_W with .B HW_BREAKPOINT_X is not allowed. .RE .TP .IR "bp_addr" " (Since Linux 2.6.33)" .I bp_addr address of the breakpoint. For execution breakpoints this is the memory address of the instruction of interest; for read and write breakpoints it is the memory address of the memory location of interest. .TP .IR "config1" " (Since Linux 2.6.39)" .I config1 is used for setting events that need an extra register or otherwise do not fit in the regular config field. Raw OFFCORE_EVENTS on Nehalem/Westmere/SandyBridge use this field on 3.3 and later kernels. .TP .IR "bp_len" " (Since Linux 2.6.33)" .I bp_len is the length of the breakpoint being measured if .I type is .BR PERF_TYPE_BREAKPOINT . Options are .BR HW_BREAKPOINT_LEN_1 , .BR HW_BREAKPOINT_LEN_2 , .BR HW_BREAKPOINT_LEN_4 , .BR HW_BREAKPOINT_LEN_8 . For an execution breakpoint, set this to .IR sizeof(long) . .TP .IR "config2" " (Since Linux 2.6.39)" .I config2 is a further extension of the .I config1 field. .TP .IR "branch_sample_type" " (Since Linux 3.4)" This is used with the CPUs hardware branch sampling, if available. It can have one of the following values: .RS .TP .B PERF_SAMPLE_BRANCH_USER Branch target is in user space .TP .B PERF_SAMPLE_BRANCH_KERNEL Branch target is in kernel space .TP .B PERF_SAMPLE_BRANCH_HV Branch target is in hypervisor .TP .B PERF_SAMPLE_BRANCH_ANY Any branch type. .TP .B PERF_SAMPLE_BRANCH_ANY_CALL Any call branch .TP .B PERF_SAMPLE_BRANCH_ANY_RETURN Any return branch .TP .BR PERF_SAMPLE_BRANCH_IND_CALL Indirect calls .TP .BR PERF_SAMPLE_BRANCH_PLM_ALL User, kernel, and hv .RE .SS "MMAP Layout" When using .BR perf_event_open() in sampled mode, asynchronous events (like counter overflow or .B PROT_EXEC mmap tracking) are logged into a ring-buffer. This ring-buffer is created and accessed through .BR mmap (2). The mmap size should be 1+2^n pages, where the first page is a metadata page .IR ( "struct perf_event_mmap_page" ) that contains various bits of information such as where the ring-buffer head is. Before kernel 2.6.39, there is a bug that means you must allocate a mmap ring buffer when sampling even if you do not plan to access it. The structure of the first metadata mmap page is as follows: .in +4n .nf struct perf_event_mmap_page { __u32 version; /* version number of this structure */ __u32 compat_version; /* lowest version this is compat with */ __u32 lock; /* seqlock for synchronization */ __u32 index; /* hardware counter identifier */ __s64 offset; /* add to hardware counter value */ __u64 time_enabled; /* time event active */ __u64 time_running; /* time event on CPU */ union { __u64 capabilities; __u64 cap_usr_time : 1, cap_usr_rdpmc : 1, }; __u16 pmc_width; __u16 time_shift; __u32 time_mult; __u64 time_offset; __u64 __reserved[120]; /* Pad to 1k */ __u64 data_head; /* head in the data section */ __u64 data_tail; /* user-space written tail */ } .fi .in The following looks at the fields in the .I perf_event_mmap_page structure in more detail. .RS .TP .I version Version number of this structure. .TP .I compat_version The lowest version this is compatible with. .TP .I lock A seqlock for synchronization. .TP .I index; A unique hardware counter identifier. .TP .I offset .\" FIXME clarify Add this to hardware counter value?? .TP .I time_enabled Time the event was active. .TP .I time_running Time the event was running. .TP .I cap_usr_time User time capability .TP .I cap_usr_rdpmc If the hardware supports user-space read of performance counters without syscall (this is the "rdpmc" instruction on x86), then the following code can be used to do a read: .in +4n .nf u32 seq, time_mult, time_shift, idx, width; u64 count, enabled, running; u64 cyc, time_offset; s64 pmc = 0; do { seq = pc\->lock; barrier(); enabled = pc\->time_enabled; running = pc\->time_running; if (pc\->cap_usr_time && enabled != running) { cyc = rdtsc(); time_offset = pc\->time_offset; time_mult = pc\->time_mult; time_shift = pc\->time_shift; } idx = pc\->index; count = pc\->offset; if (pc\->cap_usr_rdpmc && idx) { width = pc\->pmc_width; pmc = rdpmc(idx \- 1); } barrier(); } while (pc\->lock != seq); .fi .in .TP .I pmc_width If .IR cap_usr_rdpmc , this field provides the bit-width of the value read using the rdpmc or equivalent instruction. This can be used to sign extend the result like: .in +4n .nf pmc <<= 64 \- pmc_width; pmc >>= 64 \- pmc_width; // signed shift right count += pmc; .fi .in .TP .IR time_shift ", " time_mult ", " time_offset If .IR cap_usr_time , these fields can be used to compute the time delta since time_enabled (in ns) using rdtsc or similar. .nf u64 quot, rem; u64 delta; quot = (cyc >> time_shift); rem = cyc & ((1 << time_shift) \- 1); delta = time_offset + quot * time_mult + ((rem * time_mult) >> time_shift); .fi Where time_offset,time_mult,time_shift and cyc are read in the seqcount loop described above. This delta can then be added to enabled and possible running (if idx), improving the scaling: .nf enabled += delta; if (idx) running += delta; quot = count / running; rem = count % running; count = quot * enabled + (rem * enabled) / running; .fi .TP .I data_head This points to the head of the data section. On SMP-capable platforms, after reading the data_head value, user-space should issue an rmb(). .TP .I data_tail; When the mapping is .BR PROT_WRITE , the data_tail value should be written by userspace to reflect the last read data. In this case the kernel will not over-write unread data. .RE The following 2^n ring-buffer pages have the layout described below. If .I perf_event_attr.sample_id_all is set, then all event types will have the sample_type selected fields related to where/when (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) described in .B PERF_RECORD_SAMPLE below, it will be stashed just after the perf_event_header and the fields already present for the existing fields, i.e., at the end of the payload. That way a newer perf.data file will be supported by older perf tools, with these new optional fields being ignored. The mmap values start with a header: .in +4n .nf struct perf_event_header { __u32 type; __u16 misc; __u16 size; }; .fi .in Below, we describe the .I perf_event_header fields in more detail. .TP .I type The .I type value is one of the below. The values in the corresponding record (that follows the header) depend on the .I type selected as shown. .RS .TP .B PERF_RECORD_MMAP The MMAP events record the .B PROT_EXEC mappings so that we can correlate userspace IPs to code. They have the following structure: .in +4n .nf struct { struct perf_event_header header; u32 pid, tid; u64 addr; u64 len; u64 pgoff; char filename[]; }; .in .TP .B PERF_RECORD_LOST This record indicates when events are lost. .in +4n .nf struct { struct perf_event_header header; u64 id; u64 lost; }; .fi .in .TP .B PERF_RECORD_COMM This record indicates a change in the process name. .in +4n .nf struct { struct perf_event_header header; u32 pid, tid; char comm[]; }; .fi .in .TP .B PERF_RECORD_EXIT This record indicates a process exit event. .in +4n .nf struct { struct perf_event_header header; u32 pid, ppid; u32 tid, ptid; u64 time; }; .fi .in .TP .BR PERF_RECORD_THROTTLE ", " PERF_RECORD_UNTHROTTLE This record indicates a throttle/unthrottle event. .in +4n .nf struct { struct perf_event_header header; u64 time; u64 id; u64 stream_id; }; .fi .in .TP .B PERF_RECORD_FORK This record indicates a fork event. .in +4n .nf struct { struct perf_event_header header; u32 pid, ppid; u32 tid, ptid; u64 time; }; .fi .in .TP .B PERF_RECORD_READ This record indicates a read event. .in +4n .nf struct { struct perf_event_header header; u32 pid, tid; struct read_format values; }; .fi .in .TP .B PERF_RECORD_SAMPLE This record indicates a sample. .in +4n .nf struct { struct perf_event_header header; u64 ip; /* if PERF_SAMPLE_IP */ u32 pid, tid; /* if PERF_SAMPLE_TID */ u64 time; /* if PERF_SAMPLE_TIME */ u64 addr; /* if PERF_SAMPLE_ADDR */ u64 id; /* if PERF_SAMPLE_ID */ u64 stream_id; /* if PERF_SAMPLE_STREAM_ID */ u32 cpu, res; /* if PERF_SAMPLE_CPU */ u64 period; /* if PERF_SAMPLE_PERIOD */ struct read_format v; /* if PERF_SAMPLE_READ */ u64 nr; /* if PERF_SAMPLE_CALLCHAIN */ u64 ips[nr]; /* if PERF_SAMPLE_CALLCHAIN */ u32 size; /* if PERF_SAMPLE_RAW */ char data[size]; /* if PERF_SAMPLE_RAW */ u64 from; /* if PERF_SAMPLE_BRANCH_STACK */ u64 to; /* if PERF_SAMPLE_BRANCH_STACK */ u64 flags; /* if PERF_SAMPLE_BRANCH_STACK */ u64 lbr[nr];/* if PERF_SAMPLE_BRANCH_STACK */ }; .fi .in The RAW record data is opaque with respect to the ABI. The ABI doesn't make any promises with respect to the stability of its content, it may vary depending on event, hardware, and kernel version. .RE .TP .I misc The .I misc field is one of the following: .RS .TP .B PERF_RECORD_MISC_CPUMODE_MASK [To be documented] .TP .B PERF_RECORD_MISC_CPUMODE_UNKNOWN [To be documented] .TP .B PERF_RECORD_MISC_KERNEL [To be documented] .TP .B PERF_RECORD_MISC_USER [To be documented] .TP .B PERF_RECORD_MISC_HYPERVISOR [To be documented] .TP .B PERF_RECORD_MISC_GUEST_KERNEL [To be documented] .TP .B PERF_RECORD_MISC_GUEST_USER [To be documented] .TP .B PERF_RECORD_MISC_EXACT_IP This indicates that the content of .B PERF_SAMPLE_IP points to the actual instruction that triggered the event. See also .IR perf_event_attr.precise_ip . .RE .TP .I size This indicates the size of the record. .SS "Signal Overflow" Counters can be set to signal when a threshold is crossed. This is set up using traditional the .BR poll (2), .BR select (2), .BR epoll (2) and .BR fcntl (2), system calls. Normally, a notification is generated for every page filled, however one can additionally set .I perf_event_attr.wakeup_events to generate one every so many counter overflow events. .SS "Reading Results" Once a .BR perf_event_open() file descriptor has been opened, the values of the events can be read from the file descriptor. The values that are there are specified by the .I read_format field in the attr structure at open time. If you attempt to read into a buffer that is not big enough to hold the data, an error is returned .IR ( ENOSPC ). Here is the layout of the data returned by a read. If .B PERF_FORMAT_GROUP was specified to allow reading all events in a group at once: .in +4n .nf struct { u64 nr; /* The number of events */ u64 time_enabled; /* if PERF_FORMAT_TOTAL_TIME_ENABLED */ u64 time_running; /* if PERF_FORMAT_TOTAL_TIME_RUNNING */ struct { u64 value; /* The value of the event */ u64 id; /* if PERF_FORMAT_ID */ } values[nr]; }; .fi .in If .B PERF_FORMAT_GROUP was .I not specified, then the read values look as following: .in +4n .nf struct { u64 value; /* The value of the event */ u64 time_enabled; /* if PERF_FORMAT_TOTAL_TIME_ENABLED */ u64 time_running; /* if PERF_FORMAT_TOTAL_TIME_RUNNING */ u64 id; /* if PERF_FORMAT_ID */ }; .fi .in The values read are described in more detail below. .RS .TP .I nr The number of events in this file descriptor. Only available if .B PERF_FORMAT_GROUP was specified. .TP .IR time_enabled ", " time_running Total time the event was enabled and running. Normally these are the same. If more events are started than available counter slots on the PMU, then multiplexing happens and events only run part of the time. In that case the .I time_enabled and .I time running values can be used to scale an estimated value for the count. .TP .I value An unsigned 64-bit value containing the counter result. .TP .I id A globally unique value for this particular event, only there if .B PERF_FORMAT_ID was specified in read_format. .RE .RE .SS "rdpmc instruction" Starting with Linux 3.4 on x86, you can use the .I rdpmc instruction to get low-latency reads without having to enter the kernel. .SS "perf_event ioctl calls" .PP Various ioctls act on .BR perf_event_open() file descriptors .\" FIXME the arguments for these ioctl() operations need to be described .TP .B PERF_EVENT_IOC_ENABLE Enables an individual counter or counter group. .TP .B PERF_EVENT_IOC_DISABLE Disables an individual counter or counter group. Enabling or disabling the leader of a group enables or disables the entire group; that is, while the group leader is disabled, none of the counters in the group will count. Enabling or disabling a member of a group other than the leader only affects that counter; disabling a non-leader stops that counter from counting but doesn't affect any other counter. .TP .B PERF_EVENT_IOC_REFRESH Non-inherited overflow counters can use this to enable a counter for 'nr' events, after which it gets disabled again. .\" FIXME the following needs clarification/confirmation I think the goal of IOC_REFRESH is not to reload the period but simply to adjust the number of events before the next notifications. .TP .B PERF_EVENT_IOC_RESET Reset the event count to zero. This only resets the counts; there is no way to reset the multiplexing .I time_enabled or .I time_running values. When sent to a group leader, only the leader is reset (child events are not). .TP .B PERF_EVENT_IOC_PERIOD IOC_PERIOD is the command to update the period; it does not update the current period but instead defers until next. .TP .B PERF_EVENT_IOC_SET_OUTPUT This tells the kernel to report event notifications to the specified file descriptor rather than the default one. The file descriptors must all be on the same CPU. .TP .BR PERF_EVENT_IOC_SET_FILTER " (Since Linux 2.6.33)" This adds an ftrace filter to this event. .SS "Using prctl" A process can enable or disable all the counter groups that are attached to it using the .BR prctl (2) .B PR_TASK_PERF_EVENTS_ENABLE and .B PR_TASK_PERF_EVENTS_DISABLE operations. This applies to all counters on the current process, whether created by this process or by another, and does not affect any counters that this process has created on other processes. It only enables or disables the group leaders, not any other members in the groups. .SS Files in /proc/sys/kernel/ .RS .TP .I /proc/sys/kernel/perf_event_paranoid The .I perf_event_paranoid file can be set to restrict access to the performance counters. 2 - only allow userspace measurements 1 - (default) allow both kernel and user measurements 0 - allow access to CPU-specific data but not raw tracepoint samples \-1 - no restrictions The existence of the .I perf_event_paranoid file is the official method for determining if a kernel supports .BR perf_event_open(). .TP .I /proc/sys/kernel/perf_event_max_sample_rate This sets the maximum sample rate. Setting this too high can allow users to sample at a rate that impacts overall machine performance and potentially lock up the machine. The default value is 100000 (samples per second). .TP .I /proc/sys/kernel/perf_event_mlock_kb Maximum number of pages an unprivledged user can mlock (2) . The default is 129 (kB). .RE .SS Files in /sys/bus/event_source/devices/ Since Linux 2.6.34 the kernel supports having multiple PMUs available for monitoring. Information on how to program these PMUs can be found under .IR /sys/bus/event_source/devices/ . Each subdirectory corresponds to a different PMU. .RS .TP .I /sys/bus/event_source/devices/*/type This contains an integer that can be used in the .I type field of perf_event_attr to indicate you wish to use this PMU. .TP .I /sys/bus/event_source/devices/*/rdpmc [To be documented] .TP .I /sys/bus/event_source/devices/*/format/ This sub-directory contains information on what bits in the .I config field of perf_event_attr correspond to. .TP .I /sys/bus/event_source/devices/*/uevent [To be documented] .RE .SH "RETURN VALUE" .BR perf_event_open () returns the new file descriptor, or \-1 if an error occurred (in which case, .I errno is set appropriately). .SH ERRORS .TP .B EINVAL Returned if the specified event is not available. .TP .B ENOSPC Prior to Linux 3.3, if there was no counter room, .B ENOSPC was returned. Linus did not like this, and this was changed to .BR EINVAL . .B ENOSPC is still returned if you try to read results into too small a buffer. .SH VERSION .BR perf_event_open () was introduced in Linux 2.6.31 but was called .BR perf_counter_open () . It was renamed in Linux 2.6.32. .SH CONFORMING TO This call is specific to Linux and should not be used in programs intended to be portable. .SH NOTES Glibc does not provide a wrapper for this system call; call it using .BR syscall (2). The official way of knowing if .BR perf_event_open() support is enabled is checking for the existence of the file .I /proc/sys/kernel/perf_event_paranoid .SH BUGS The .B F_SETOWN_EX option to .IR fcntl (2) is needed to properly get overflow signals in threads. This was introduced in Linux 2.6.32. Prior to Linux 2.6.33 (at least for x86) the kernel did not check if events could be scheduled together until read time. The same happens on all known kernels if the NMI watchdog is enabled. This means to see if a given set of events works you have to .BR perf_event_open (), start, then read before you know for sure you can get valid measurements. Prior to Linux 2.6.34 event constraints were not enforced by the kernel. In that case, some events would silently return "0" if the kernel scheduled them in an improper counter slot. Prior to Linux 2.6.34 there was a bug when multiplexing where the wrong results could be returned. Kernels from Linux 2.6.35 to Linux 2.6.39 can quickly crash the kernel if "inherit" is enabled and many threads are started. Prior to Linux 2.6.35, .B PERF_FORMAT_GROUP did not work with attached processes. In older Linux 2.6 versions, refreshing an event group leader refreshed all siblings, and refreshing with a parameter of 0 enabled infinite refresh. This behavior is unsupported and should not be relied on. There is a bug in the kernel code between Linux 2.6.36 and Linux 3.0 that ignores the "watermark" field and acts as if a wakeup_event was chosen if the union has a non-zero value in it. Always double-check your results! Various generalized events have had wrong values. For example, retired branches measured the wrong thing on AMD machines until Linux 2.6.35. .SH EXAMPLE The following is a short example that measures the total instruction count of a call to printf(). .nf #include #include #include #include #include #include #include long perf_event_open( struct perf_event_attr *hw_event, pid_t pid, int cpu, int group_fd, unsigned long flags ) { int ret; ret = syscall( __NR_perf_event_open, hw_event, pid, cpu, group_fd, flags ); return ret; } int main(int argc, char **argv) { struct perf_event_attr pe; long long count; int fd; memset(&pe, 0, sizeof(struct perf_event_attr)); pe.type = PERF_TYPE_HARDWARE; pe.size = sizeof(struct perf_event_attr); pe.config = PERF_COUNT_HW_INSTRUCTIONS; pe.disabled = 1; pe.exclude_kernel = 1; pe.exclude_hv = 1; fd = perf_event_open(&pe, 0, \-1, \-1, 0); if (fd < 0) { fprintf(stderr, "Error opening leader %llx\\n", pe.config); } ioctl(fd, PERF_EVENT_IOC_RESET, 0); ioctl(fd, PERF_EVENT_IOC_ENABLE, 0); printf("Measuring instruction count for this printf\\n"); ioctl(fd, PERF_EVENT_IOC_DISABLE, 0); read(fd, &count, sizeof(long long)); printf("Used %lld instructions\\n", count); close(fd); } .fi .SH "SEE ALSO" .BR fcntl (2), .BR mmap (2), .BR open (2), .BR prctl (2), .BR read (2) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/