Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932961Ab2JYHos (ORCPT ); Thu, 25 Oct 2012 03:44:48 -0400 Received: from emcscan.emc.com.tw ([192.72.220.5]:14799 "EHLO emcscan.emc.com.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758404Ab2JYHoo (ORCPT ); Thu, 25 Oct 2012 03:44:44 -0400 From: =?big5?B?vEK5xcJA?= To: "'Scott Liu'" , "'Dmitry Torokhov'" , , , Cc: "'Benjamin Tissoires'" , "'Jesse'" , "'Vincent Wang'" , "'Paul'" Subject: RE: [PATCH v2] upport Elan Touchscreen eKTF product. Date: Thu, 25 Oct 2012 15:44:26 +0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 Thread-Index: Ac2xz/bEBTZJ2ixSQLiyLkMvOpvyWAAsrVXw X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.6157 In-Reply-To: <1351044664-7247-1-git-send-email-scott.liu@emc.com.tw> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 73722 Lines: 2783 Hi Dmitry, I reply to your last question here. Your review is the one I want to ignore it and this is the right patch for v2. Sorry for inconvenience. The kfifo_out_locked() was used by store_set_mode() sysfs attribute function. I will improve the driver based on this version and according to your suggestion. Thanks, Scott > -----Original Message----- > From: linux-input-owner@vger.kernel.org [mailto:linux-input-owner@vger.kernel.org] On > Behalf Of Scott Liu > Sent: Wednesday, October 24, 2012 10:11 AM > To: Scott Liu; Dmitry Torokhov; linux-input@vger.kernel.org; linux-i2c@vger.kernel.org; > linux-kernel@vger.kernel.org > Cc: Benjamin Tissoires; Jesse; Vincent Wang; Paul > Subject: [PATCH v2] upport Elan Touchscreen eKTF product. > > Hi Dmitry: > Sorry, please ignore my previous patch. > > This patch is for Elan eKTF Touchscreen product, I2C adpater module. > > Signed-off-by: Scott Liu > --- > Hi, > v2 revision I have fixed some bug as your advise. > 1. To target the mainline > 2. No Android dependency > 3. reuse those duplication code from Henrik's patchset. > (input_mt_sync_frame() / input_mt_get_slot_by_key()) > 4. some typo and etc... > > drivers/input/touchscreen/Kconfig | 9 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/elants_i2c.c | 2533 ++++++++++++++++++++++++++++++++ > include/linux/i2c/elants.h | 56 + > 4 files changed, 2599 insertions(+) > create mode 100644 drivers/input/touchscreen/elants_i2c.c > create mode 100644 include/linux/i2c/elants.h > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 1ba232c..50e6f05 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -237,6 +237,15 @@ config TOUCHSCREEN_EETI > To compile this driver as a module, choose M here: the > module will be called eeti_ts. > > +config TOUCHSCREEN_ELAN > + tristate "Elan touchscreen panel support" > + depends on I2C > + help > + Say Y here to enable support for I2C connected Elan touch panels. > + > + To compile this driver as a module, choose M here: the > + module will be called elants_i2c. > + > config TOUCHSCREEN_EGALAX > tristate "EETI eGalax multi-touch panel support" > depends on I2C > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 178eb12..428a631 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o > obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o > obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o > obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o > +obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o > obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o > obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o > obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o > diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c > new file mode 100644 > index 0000000..47546be > --- /dev/null > +++ b/drivers/input/touchscreen/elants_i2c.c > @@ -0,0 +1,2533 @@ > +/* > + * Elan Microelectronics touchpanels with I2C interface > + * > + * Copyright (C) 2012 Elan Microelectronics Corporation. > + * Scott Liu > + * > + * This code is partly based on hid-multitouch.c: > + * > + * Copyright (c) 2010-2012 Stephane Chatty > + * Copyright (c) 2010-2012 Benjamin Tissoires > + * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France > + * > + */ > + > +/* > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > + > +/* debug option */ > +static bool debug = false; > +module_param(debug, bool, 0444); > +MODULE_PARM_DESC(debug, "print a lot of debug information"); > + > +#define elan_dbg(client, fmt, arg...) \ > + if (debug) \ > + dev_printk(KERN_DEBUG, &client->dev, fmt, ##arg) > + > +/*================================================= > + * Marco > + *================================================= */ > +#define DRV_NAME "elants_i2c" > + > +#define DRV_MA_VER 2 > +#define DRV_MI_VER 0 > +#define DRV_SUB_MI_VER 0 > + > +#define _str(s) #s > +#define str(s) _str(s) > +#define DRIVER_VERSION > str(DRV_MA_VER.DRV_MI_VER.DRV_SUB_MI_VER) > + > +#define IDX_PACKET_SIZE_WIDTH 40 > + > +#define MAX_CONTACT_NUM 10 > + > +/* FW Power Saving Mode */ > +#define PWR_STATE_DEEP_SLEEP 0 > +#define PWR_STATE_NORMAL 1 > +#define PWR_STATE_MASK BIT(3) > + > +/* kfifo buffer size, used for Read command handshake */ > +#define FIFO_SIZE (64) > + > +/*! Convert from rows or columns into resolution */ > +#define ELAN_TS_RESOLUTION(n) ((n - 1) * 64) > + > +static const char hello_packet[4] = { 0x55, 0x55, 0x55, 0x55 }; > +static const char iniap_packet[4] = { 0x55, 0xaa, 0x33, 0xcc }; > +static const char recov_packet[4] = { 0x55, 0x55, 0x80, 0x80 }; > + > + > +/*! driver status flag, should move to public header file */ > +#define STA_NONINIT 0x00000001 > +#define STA_INIT 0x00000002 > +#define STA_INIT2 0x00000004 > +#define STA_INIT3 0x00000100 > +#define STA_INIT4 0x00000200 > +#define STA_PROBED 0x00000008 > +#define STA_ERR_HELLO_PKT 0x00000010 > +#define STA_USE_IRQ 0x00000020 > +#define STA_SLEEP_MODE 0x00000040 > + > +/*======================================= > + * Structure Definition > + *=======================================*/ > + > +/*! @enum elan i2c address definition */ > +enum elan_i2c_addr { > + elan_i2c_master = 0x10, > + elan_i2c_slave1 = 0x20, > + elan_i2c_slave2 = 0x21, > + > + elan_i2c_maxnum = 3, > +}; > + > +/*! @enum finger_report_header Finger report header byte definition */ > +enum finger_report_header { > + idx_coordinate_packet_4_finger = 0x5c, > + idx_coordinate_packet_10_finger = 0x62, > +}; > + > +/*! @enum fw_queue_report_hdr FW Queue report header definition */ > +enum fw_queue_report_hdr { > + queue_header_byte_Single = 0x62, > + queue_header_byte_normal = 0x63, > + queue_header_byte_wait = 0x64, > + cmd_header_byte_rek = 0x66, > + queue_header_size = 4, > + queue_packet_max_len = queue_header_size + (IDX_PACKET_SIZE_WIDTH * 3), > +}; > + > +/*! @enum fw_normal_cmd_hdr FW Normal command header definition */ > +enum fw_normal_cmd_hdr { > + cmd_header_byte_write = 0x54, > + cmd_header_byte_read = 0x53, > + cmd_header_byte_response = 0x52, > + cmd_header_byte_hello = 0x55, > + cmd_response_len = 4 > +}; > + > +/*! @enum fw_info_pos FW information position */ > +enum fw_info_pos { > + idx_finger_header = 0, > + idx_finger_state = 1, > + idx_finger_total = 2, > + idx_finger_checksum = 34, > + idx_finger_width = 35, > + idx_4finger_checksum = 17, > + idx_finger_width_checksum = 34, > +}; > + > +/*! @enum lock_bit Lock bit definition */ > +enum lock_bit { > + idx_file_operate = 0, > + idx_cmd_handshake = 1, > + idx_finger_report = 2, > + idx_update_fw = 3, > +}; > + > +enum kfifo_ret { > + ret_ok = 0, > + ret_cmdrsp = 1, > + ret_fail = -1, > +}; > + > +typedef enum elan_boot_e { > + E_BOOT_NORM = 0, > + E_BOOT_IAP = 1 > +} elan_boot_t; > + > + > +/*! @struct */ > +struct multi_queue_header { > + u8 packet_id; > + u8 report_count; > + u8 report_length; > + u8 reserved; > +}; > + > +/*! @brief elan_polling */ > +struct elan_polling { > + struct workqueue_struct *elan_wq; /* polling work queue */ > + struct timer_list timer; /* Polling intr_gpio timer */ > + u8 int_status; /* polling intr gpio status */ > +}; > + > +/* finger handler, refer to hid-multitouch.c */ > +struct mt_slot { > + __s32 x, y, p, w, h; > + __s32 contactid; /* the device ContactID assigned to this slot */ > + bool touch_state; /* is the touch valid? */ > + bool seen_in_this_frame;/* has this slot been updated */ > +}; > + > +struct mt_device { > + struct mt_slot curdata; /* placeholder of incoming data */ > + __u8 num_received; /* how many contacts we received */ > + __u8 num_expected; /* expected last contact index */ > + __u8 maxcontacts; > + bool curvalid; /* is the current contact valid? */ > + unsigned mt_flags; /* flags to pass to input-mt */ > + struct mt_slot *slots; > +}; > + > + > +/** > +* > +* @brief elants_data > +* > +* all variable should include in this struct. > +* > +*/ > +struct elants_data { > + int intr_gpio; /* interupter pin*/ > + int rst_gpio; /* reset pin*/ > + int use_irq; > + u8 major_fw_version; > + u8 minor_fw_version; > + u8 major_bc_version; > + u8 minor_bc_version; > + u8 major_hw_id; > + u8 minor_hw_id; > + bool fw_enabled; /* True if firmware device enabled*/ > + int rows; /* Panel geometry for input layer*/ > + int cols; > + int x_max; > + int y_max; > + /* Power state 0:sleep 1:active*/ > + u8 power_state; > + /* TS is in IAP mode already*/ > +#define IAP_MODE_ENABLE 1 > + /* 1 : Firmware update mode > + 0 : normal*/ > + unsigned int iap_mode; > + unsigned int rx_size; /* Read size in use*/ > + > + /* Multi-queue info */ > + struct multi_queue_header mq_header; > + > + /* our i2c client*/ > + struct i2c_client *client; > + /* input device*/ > + struct input_dev *input; > + /* normal function work queue*/ > + struct work_struct work; > + /* start probe start*/ > + struct task_struct *thread; > + /* char device for ioctl and IAP*/ > + struct miscdevice firmware; > + /* regular polling work thread*/ > + struct work_struct pollingwork; > + /* regular polling work queue*/ > + struct elan_polling polling; > + > + /* Protects I2C accesses to device*/ > + struct mutex mutex; > + /* Protects I2C tx/rx*/ > + struct mutex tr_mutex; > + > + /* device flags */ > + unsigned long flags; > + > + /* elan-iap i2c address*/ > + unsigned short i2caddr; > + > + /* fifo and processing */ > + struct kfifo fifo; > + > + /* Serialize operations around FIFO */ > + struct mutex fifo_mutex; > + wait_queue_head_t wait; > + spinlock_t rx_kfifo_lock; > + > + /* boot log */ > + u8 boot_log[256]; > + > + /*! Add for TS driver debug */ > + unsigned int status; > + long int irq_received; > + long int packet_received; > + long int packet_fail; > + long int touched_sync; > + long int no_touched_sync; > + long int checksum_correct; > + long int wdt_reset; > + u16 checksum_fail; > + u16 header_fail; > + u16 mq_header_fail; > + u16 drop_frame; > + > + /* mt device */ > + struct mt_device td; > +}; > + > + > + > +/*/============================================ > + * Function prototype > + *=============================================*/ > + > +static void > +elants_drop_packet(struct elants_data *ts); > +static int > +elan_hw_reset(struct i2c_client *client); > +static int > +elan_touch_pull_frame(struct elants_data *ts, > + u8 *buf); > + > +/*================================================= > + * Global variable > + *=================================================*/ > + > +/*! for elan-iap char driver */ > +static struct miscdevice *private_ts; > + > +#define elants_acqurie_data(a, cmd, buf, c) \ > + elants_async_recv_data(a, cmd, buf, c, c) > + > +/*================================================= > + * Function implement > + *=================================================*/ > +static inline void elan_msleep(u32 t) > +{ > + /* > + * If the sleeping time is 10us - 20ms, usleep_range() is recommended. > + * Read Documentation/timers/timers-howto.txt > + */ > + usleep_range(t*1000, t*1000 + 500); > +} > + > +/** > + * @brief elan_ts_poll - polling intr pin status. > + * @param client : our i2c device > + * > + * @retval 0 means intr pin is low, \n > + * otherwise is high. > + * > + * polling intr pin untill low and the maximus wait time is \b 200ms. > + */ > +static int elan_ts_poll(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int status = 0, retry = 20; > + > + do { > + status = gpio_get_value(ts->intr_gpio); > + elan_dbg(client, > + "%s: status = %d\n", __func__, status); > + retry--; > + mdelay(10); > + } while (status != 0 && retry > 0); > + > + elan_dbg(client, > + "%s: poll interrupt status %s\n", > + __func__, status == 1 ? "high" : "low"); > + return (status == 0 ? 0 : -ETIMEDOUT); > +} > + > + > +/** > + * @brief \b elants_async_recv_data - get TP status > + * @param client : our i2c device > + * @param cmd : asking command > + * @param buf : result > + * @param size : command length usually. > + * > + * set command type and TP will return its status in buf. > + */ > +static int elants_async_recv_data( > + struct i2c_client *client, > + const uint8_t *cmd, > + uint8_t *buf, size_t tx_size, > + size_t rx_size) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + dev_dbg(&client->dev, > + "[ELAN] Enter: %s\n", __func__); > + > + if (buf == NULL) > + return -EINVAL; > + > + mutex_lock(&ts->tr_mutex); > + if ((i2c_master_send(client, cmd, tx_size)) != tx_size) { > + dev_err(&client->dev, > + "%s: i2c_master_send failed\n", __func__); > + goto fail; > + } > + > + if (unlikely(elan_ts_poll(client) < 0)) > + goto fail; > + else { > + if (i2c_master_recv(client, buf, rx_size) != rx_size) > + goto fail; > + mutex_unlock(&ts->tr_mutex); > + } > + > + return 0; > + > +fail: > + mutex_unlock(&ts->tr_mutex); > + return -EINVAL; > +} > + > + > +/** > + * @brief \b elan_ts_set_data - set command to TP. > + * @param client : our i2c device > + * @param data : command or data which will send to TP. > + * @param len : command length usually. > + * > + * set command to our TP. > + */ > +static int elants_set_data(struct i2c_client *client, > + const u8 *data, size_t len) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + struct i2c_adapter *adap = client->adapter; > + struct i2c_msg msg; > + int rc = 0; > + > + dev_dbg(&client->dev, "[ELAN] Enter: %s\n", __func__); > + elan_dbg(client, > + "dump cmd: %02x, %02x, %02x, %02x, addr=%x\n", > + data[0], data[1], data[2], data[3], ts->i2caddr); > + > + mutex_lock(&ts->tr_mutex); > + > + msg.addr = ts->i2caddr; > + msg.flags = ts->client->flags & I2C_M_TEN; > + msg.len = len; > + msg.buf = (char *)data; > + > + rc = i2c_transfer(adap, &msg, 1); > + if (rc != 1) > + dev_err(&ts->client->dev, > + "[ELAN] i2c_transfer write fail, rc=%d\n", rc); > + > + mutex_unlock(&ts->tr_mutex); > + > + /* If everything went ok (i.e. 1 msg transmitted), return #bytes > + transmitted, else error code. */ > + return (rc == 1) ? len : rc; > + > +} > + > +/** > + * @brief \b elan_ts_get_data - set command to TP. > + * @param client : our i2c device > + * @param data : data to be received from TP. > + * @param len : command length usually. > + * > + * get data from our TP. > + */ > +static int elants_get_data( > + struct i2c_client *client, > + const u8 *buf, > + size_t len) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + struct i2c_adapter *adap = client->adapter; > + struct i2c_msg msg; > + int rc = 0; > + > + dev_dbg(&client->dev, > + "[ELAN] Enter: %s id:0x%x\n", __func__, ts->i2caddr); > + > + mutex_lock(&ts->tr_mutex); > + > + msg.addr = ts->i2caddr; > + msg.flags = client->flags & I2C_M_TEN; > + msg.flags |= I2C_M_RD; > + msg.len = len; > + msg.buf = (char *)buf; > + > + rc = i2c_transfer(adap, &msg, 1); > + if (rc != 1) > + dev_err(&client->dev, > + "[ELAN] i2c_transfer read fail, rc=%d\n", rc); > + > + mutex_unlock(&ts->tr_mutex); > + > + /* If everything went ok (i.e. 1 msg transmitted), return #bytes > + transmitted, else error code. */ > + return (rc == 1) ? len : rc; > +} > + > + > +static int elants_cmd_transfer_once( > + struct i2c_client *client, > + const u8 *sbuf, const u8 slen, > + u8 *rbuf, u8 rlen) > +{ > + int ret = 0; > + struct elants_data *ts = > + i2c_get_clientdata(client); > + > + mutex_lock(&ts->mutex); > + set_bit(idx_cmd_handshake, &ts->flags); > + elants_set_data(client, sbuf, slen); > + mutex_unlock(&ts->mutex); > + > + if (sbuf[0] == cmd_header_byte_read) { > + /* We will wait for non O_NONBLOCK handles until a signal or data */ > + mutex_lock(&ts->fifo_mutex); > + > + while (kfifo_len(&ts->fifo) == 0) { > + mutex_unlock(&ts->fifo_mutex); > + ret = wait_event_interruptible_timeout( > + ts->wait, kfifo_len(&ts->fifo), > + msecs_to_jiffies(3000)); > + if (ret <= 0) { > + ret = -ETIMEDOUT; > + dev_err(&client->dev, > + "timeout!! wake_up(ts->wait) \n"); > + goto err2; > + } > + mutex_lock(&ts->fifo_mutex); > + } > + if (elan_touch_pull_frame(ts, rbuf) < 0) { > + ret = -1; > + goto err1; > + } > + > + pr_info("[ELAN] Get Data [%.2x:%.2x:%.2x:%.2x]\n", > + rbuf[0], rbuf[1], rbuf[2], rbuf[3]); > +err1: > + mutex_unlock(&ts->fifo_mutex); > +err2: > + clear_bit(idx_cmd_handshake, &ts->flags); > + } > + > + return (ret > 0) ? 1 : ret; > +} > + > +/** > + * @brief interfaces > + * provide the hardware and firmware information > + */ > +static ssize_t show_fw_version_value( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + return sprintf(buf, "%.2x %.2x\n", > + ts->major_fw_version, > + ts->minor_fw_version); > +} > + > + > +static ssize_t show_bc_version_value( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + return sprintf(buf, "%.2x %.2x\n", > + ts->major_bc_version, > + ts->minor_bc_version); > +} > + > +static ssize_t show_drvver_value( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + return sprintf(buf, "%s\n", DRIVER_VERSION); > +} > + > + > +static ssize_t show_intr_gpio( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + int ret = 0; > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + ret = gpio_get_value(ts->intr_gpio); > + > + return sprintf(buf, "%d\n", ret); > +} > + > +static ssize_t show_adapter_pkt_rvd( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + return sprintf(buf, "irq_received=%ld packet_received=%ld " \ > + "packet_fail=%ld mq_hdr_fail=%d, " \ > + "checksum_fail=%x header_fail=%d, " \ > + "poll_timer=%d, wdt_reset=%ld\n", > + ts->irq_received, ts->packet_received, > + ts->packet_fail, ts->mq_header_fail, > + ts->checksum_fail, ts->header_fail, > + ts->drop_frame, ts->wdt_reset); > +} > + > +static ssize_t show_queue_count( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + return sprintf(buf, "queue_report_count=%d, report_length=%d\n", > + ts->mq_header.report_count, > + ts->mq_header.report_length); > +} > + > + > +static ssize_t store_power_mode( > + struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + int ret = 0; > + unsigned long val; > + const char AcMode[] = {0x54, 0x30, 0x00, 0x01}; > + const char BtMode[] = {0x54, 0x38, 0x00, 0x01}; > + char cmd[4]; > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + ret = kstrtoul(buf, 10, &val); > + if (ret) > + return ret; > + > + switch (val) { > + case 0: > + memcpy(cmd, AcMode, sizeof(AcMode)); > + break; > + case 1: > + memcpy(cmd, BtMode, sizeof(BtMode)); > + break; > + default: > + return -1; > + } > + > + mutex_lock(&ts->mutex); > + elants_set_data(ts->client, cmd, sizeof(cmd)); > + mutex_unlock(&ts->mutex); > + > + return count; > +} > + > +static ssize_t show_power_mode( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + const char RespCmd[] = {0x53, 0x30, 0x00, 0x01}; > + char tbuf[4]; > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + > + mutex_lock(&ts->mutex); > + set_bit(idx_cmd_handshake, &ts->flags); > + elants_acqurie_data(ts->client, RespCmd, tbuf, sizeof(RespCmd)); > + if (tbuf[0] != cmd_header_byte_response) { > + dev_err(&client->dev, > + "exception!! %x:%x:%x:%x\n", > + tbuf[0], tbuf[1], tbuf[2], tbuf[3]); > + elants_drop_packet(ts); > + memset(tbuf, 0x0, sizeof(tbuf)); > + } > + clear_bit(idx_cmd_handshake, &ts->flags); > + mutex_unlock(&ts->mutex); > + > + return sprintf(buf, "%x:%x:%x:%x\n", > + tbuf[0], tbuf[1], tbuf[2], tbuf[3]); > +} > + > +static ssize_t show_report_rate( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + long int old_frame, new_frame; > + > + old_frame = ts->packet_received; > + ssleep(1); > + new_frame = ts->packet_received; > + > + return sprintf(buf, "%ld\n", new_frame - old_frame); > +} > + > +static ssize_t show_iap_mode( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + return sprintf(buf, "%s\n", > + (ts->iap_mode == 0) ? "Normal" : "Recovery"); > +} > + > +static ssize_t show_recal( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + u8 sbuf[4], retstr[32] = "re-K finish"; > + > + u8 w_flashkey[4] = {0x54, 0xC0, 0xE1, 0x5A}; > + u8 rek[4] = {0x54, 0x29, 0x00, 0x01}; > + > + ts->i2caddr = elan_i2c_master; > + elants_set_data(client, w_flashkey, 4); > + elan_msleep(1); > + elants_set_data(client, rek, 4); > + > + while (gpio_get_value(ts->intr_gpio) == 0) { > + if (elants_get_data(client, sbuf, 4) != 4) > + sprintf(retstr, "re-K Fail"); > + pr_info("[ELAN] buf=%x:%x:%x:%x\n", buf[0], > + sbuf[1], sbuf[2], sbuf[3]); > + } > + > + return sprintf(buf, "%s\n", retstr); > +} > + > + > +static ssize_t show_boot_log( > + struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + /* show boot status, allow user cat this log during iap mode enable!! */ > + > + return scnprintf(buf, PAGE_SIZE, ts->boot_log); > +} > + > +static ssize_t store_set_mode( > + struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + int ret; > + unsigned int cmds[32]; > + u8 recv_buf[32]; > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return -1; > + > + /* get input */ > + sscanf(buf, "%x %x %x %x", &cmds[0], &cmds[1], &cmds[2], &cmds[3]); > + > + if (cmds[0] != cmd_header_byte_read && > + cmds[0] != cmd_header_byte_write) > + return -EFAULT; > + > + pr_info("[ELAN] Command %.2x:%.2x:%.2x:%.2x\n", > + cmds[0], cmds[1], cmds[2], cmds[3]); > + > + ret = elants_cmd_transfer_once(client, > + (const u8 *)cmds, 4, recv_buf, 4); > + > + return (ret > 0) ? count : -1; > +} > + > + > + > +static DEVICE_ATTR(cmd_mode, S_IWUGO, NULL, store_set_mode); > +static DEVICE_ATTR(power_mode, S_IRUGO|S_IWUGO, > + show_power_mode, store_power_mode); > +static DEVICE_ATTR(queue_count, S_IRUGO, show_queue_count, NULL); > +static DEVICE_ATTR(drv_version, S_IRUGO, show_drvver_value, NULL); > +static DEVICE_ATTR(fw_version, S_IRUGO, show_fw_version_value, NULL); > +static DEVICE_ATTR(bc_version, S_IRUGO, show_bc_version_value, NULL); > +static DEVICE_ATTR(ts_packet, S_IRUGO, show_adapter_pkt_rvd, NULL); > +static DEVICE_ATTR(gpio, S_IRUGO, show_intr_gpio, NULL); > +static DEVICE_ATTR(report_rate, S_IRUGO, show_report_rate, NULL); > +static DEVICE_ATTR(boot_log, S_IRUGO, show_boot_log, NULL); > +static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL); > +static DEVICE_ATTR(rek, S_IRUGO, show_recal, NULL); > + > + > + > +static struct attribute *elan_attributes[] = { > + &dev_attr_cmd_mode.attr, > + &dev_attr_power_mode.attr, > + &dev_attr_queue_count.attr, > + &dev_attr_fw_version.attr, > + &dev_attr_drv_version.attr, > + &dev_attr_bc_version.attr, > + &dev_attr_gpio.attr, > + &dev_attr_ts_packet.attr, > + &dev_attr_report_rate.attr, > + &dev_attr_boot_log.attr, > + &dev_attr_iap_mode.attr, > + &dev_attr_rek.attr, > + > + NULL > +}; > + > + > +static struct attribute_group elan_attribute_group = { > + .name = "elants", > + .attrs = elan_attributes, > +}; > + > + > +/** > + * @brief elan_hw_reset - h/w reset. > + * @param client : our i2c device > + * > + * @retval >0 means reset success, \n > + * otherwise is fail. > + * > + */ > +static int elan_hw_reset(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int ret; > + > + if (ts->rst_gpio < 0) > + return -1; > + > + ret = gpio_direction_output(ts->rst_gpio, 0); > + if (ret < 0) { > + pr_err("gpio_direction fail!\n"); > + return ret; > + } > + > + elan_msleep(2); > + > + ret = gpio_direction_output(ts->rst_gpio, 1); > + if (ret < 0) > + return ret; > + > + /* wait > 10ms to ensure that fw is in IAP mode */ > + msleep(20); > + > + return ret; > +} > + > + > +/** > + * @brief \b elants_is_iap - is it in iap mode ? > + * @param client : our i2c device > + * @param addr : i2c address > + * > + * check whether fw currently is in iap. > + * @return : > + * < 0 :normal mode > + * > 0 :iap mode or abnormal. > + * -EINVAL : addr overflow, no such device > + */ > +static int elants_is_iap( > + struct i2c_client *client, > + u16 addr) > +{ > + int rc; > + uint8_t buf_recv[4] = {0}; > + struct elants_data *ts = i2c_get_clientdata(client); > + > + ts->i2caddr = addr; > + rc = elants_get_data(client, buf_recv, 4); > + if (unlikely(rc < 0)) { > + dev_err(&client->dev, > + "[ELAN] %s: ID 0x%.2x retval=%d!\n", > + __func__, addr, rc); > + rc = -ENODEV; > + } else { > + if (memcmp(buf_recv, iniap_packet, 4)) { > + dev_err(&client->dev, > + "[ELAN] %s: ID 0x%x retval=%d !\n", > + __func__, addr, rc); > + rc = -ENODEV; > + } > + } > + > + ts->i2caddr = elan_i2c_master; > + > + return rc; > +} > + > +static int elants_boot( > + struct i2c_client *client, > + u16 addr, > + elan_boot_t type) > +{ > + int rc; > + struct elants_data *ts = i2c_get_clientdata(client); > + uint8_t command[2][4] = { > + {0x4D, 0x61, 0x69, 0x6E}, /* normal_command */ > + {0x45, 0x49, 0x41, 0x50}, /* iap_command */ > + }; > + > + ts->i2caddr = addr; > + rc = elants_set_data(client, command[(int32_t)type], 4); > + if (rc != 4) { > + if (type == E_BOOT_IAP) > + dev_err(&client->dev, > + "[elan] Boot IAP fail, error=%d\n", > + rc); > + else > + dev_dbg(&client->dev, > + "[elan] Boot normal fail, error=%d\n", > + rc); > + ts->i2caddr = elan_i2c_master; > + return -EINVAL; > + } > + pr_info("[elan] Boot success -- 0x%x\n", addr); > + ts->i2caddr = elan_i2c_master; > + return 0; > +} > + > +static int elants_enter_iap(struct i2c_client *client) > +{ > + int rc = 0; > + struct elants_data *ts = i2c_get_clientdata(client); > + > + elan_hw_reset(client); > + > + /* Boot devices to IAP mode */ > + rc = elants_boot(client, elan_i2c_master, E_BOOT_IAP); > + if (rc < 0) > + return rc; > + > + elan_msleep(10); > + > + /* Check if devices can enter IAP mode */ > + rc = elants_is_iap(client, elan_i2c_master); > + if (rc < 0) > + return rc; > + > + ts->iap_mode = IAP_MODE_ENABLE; > + set_bit(idx_update_fw, &ts->flags); > + ts->i2caddr = elan_i2c_master; > + > + return rc; > +} > + > + > + > +/** > + * @brief __hello_packet_handler - hadle hello packet. > + * @param client : our i2c device > + * > + * @return { >0 means success, > + * otherwise fail. } > + * > + * Normal hello packet is {0x55, 0x55, 0x55, 0x55} > + * recovery mode hello packet is {0x55, 0x55, 0x80, 0x80} > + */ > +static int __hello_packet_handler(struct i2c_client *client) > +{ > + int rc = 0, tries = 5; > + uint8_t buf_recv[4] = {0}; > + struct elants_data *ts = i2c_get_clientdata(client); > + > + > +retry: /* wait INT for 1sec */ > + rc = elan_ts_poll(client); > + if (rc < 0) { > + dev_err(&client->dev, > + "%s: poll failed!\n", ELAN_DEV_NAME); > + if (tries-- > 0) > + goto retry; > + } > + > + rc = elants_get_data(client, buf_recv, 4); > + > + /* Print buf_recv anyway */ > + pr_info("[ELAN] rc = %d Hello Packet: " \ > + "[0x%.2x 0x%.2x 0x%.2x 0x%.2x]\n", > + rc, buf_recv[0], buf_recv[1], buf_recv[2], buf_recv[3]); > + > + if (rc != 4) { > + dev_err(&client->dev, > + "[ELAN] %s: Try recovery because of no hello\n", > + __func__); > + > + /* force TP FW into IAP mode. */ > + elants_enter_iap(client); > + return -EINVAL; > + } > + > + /* v0.85 IAP recovery mechanism 2012-1022*/ > + if (memcmp(buf_recv, hello_packet, 4)) { > + /* Check if got 55558080 and > + * should receive next 4Byte for BC version > + */ > + if (!memcmp(buf_recv, recov_packet, 4)) { > + pr_warn("[ELAN] got IAP recovery packet!(55558080)\n"); > + rc = elants_get_data(client, buf_recv, 4); > + if (unlikely(rc != 4)) { > + dev_err(&client->dev, > + "Got IAP recovery packet fail!\n"); > + return -ENODEV; > + } > + > + /* buf_recv[0,1] is dummy data */ > + ts->major_bc_version = buf_recv[3]; > + ts->minor_bc_version = buf_recv[2]; > + > + pr_info("[ELAN] BC version = %.2x:%.2x", > + ts->major_bc_version, > + ts->minor_bc_version); > + } > + > + pr_info("[ELAN] got mainflow recovery message\n"); > + rc = elants_enter_iap(client); > + if (rc < 0) > + dev_err(&client->dev, "Enter IAP mode fail!\n"); > + return -ENODEV; > + } > + > + ts->i2caddr = elan_i2c_master; > + > + return rc; > +} > + > +static int __fw_packet_handler(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int rc, tries = 3; > + const uint8_t cmd[] = {cmd_header_byte_read, 0x00, 0x00, 0x01}; > + uint8_t buf_recv[4] = {0x0}; > + > + /* Command not support in IAP recovery mode */ > + if (test_bit(idx_update_fw, &ts->flags)) > + return 0; > +retry: > + rc = elants_acqurie_data(client, cmd, buf_recv, 4); > + if (rc < 0) > + return rc; > + > + if (buf_recv[0] == cmd_header_byte_response) { > + ts->major_fw_version = ((buf_recv[1] & 0x0f) << 4) | > + ((buf_recv[2] & 0xf0) >> 4); > + ts->minor_fw_version = ((buf_recv[2] & 0x0f) << 4) | > + ((buf_recv[3] & 0xf0) >> 4); > + > + if ((ts->major_fw_version == 0x00 && > + ts->minor_fw_version == 0x00) || > + (ts->major_fw_version == 0xFF && > + ts->minor_fw_version == 0xFF)) { > + dev_err(&client->dev, > + "\n\n[ELAN] FW version is empty, " > + "suggest IAP ELAN chip\n\n"); > + return -EINVAL; > + } > + > + elan_dbg(client, > + "[ELAN] TOUCH MAJOR FW VERSION 0x%02x\n", > + ts->major_fw_version); > + elan_dbg(client, > + "[ELAN] TOUCH MINOR FW VERSION 0x%02x\n", > + ts->minor_fw_version); > + } else { > + if (tries > 0) { > + tries--; > + goto retry; > + } > + ts->major_fw_version = 0xff; > + ts->minor_fw_version = 0xff; > + dev_err(&client->dev, > + "\n\n[ELAN] FW version is empty, " > + "suggest IAP ELAN chip\n\n"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int __touch_get_resolution(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int rc; > + uint8_t buf_recv[17] = {0x0}; > + const uint8_t get_resolution_cmd[] = { > + 0x5B, 0x00, 0x00, 0x00, 0x00, 0x00 > + }; > + > + /* Command not support in IAP recovery mode */ > + if (test_bit(idx_update_fw, &ts->flags)) > + return 0; > + > + rc = elants_async_recv_data(client, get_resolution_cmd, buf_recv, > + sizeof(get_r esolution_cmd), sizeof(buf_recv)); > + if (rc < 0) > + return -rc; > + > + elan_dbg(client, > + "[ELAN] %x:%x:%x, :%x:%x:%x, %d\n", > + buf_recv[2], buf_recv[6], buf_recv[10], > + buf_recv[3], buf_recv[7], buf_recv[0], rc); > + > + if (buf_recv[0] != 0x9B) > + return -EINVAL; > + > + elan_dbg(client, "[ELAN] %x:%x:%x, :%x:%x:%x, %d\n", > + buf_recv[2], buf_recv[6], buf_recv[10], > + buf_recv[3], buf_recv[7], buf_recv[11], rc); > + > + > + ts->rows = (buf_recv[2] + buf_recv[6] + buf_recv[10]); > + ts->cols = (buf_recv[3] + buf_recv[7] + buf_recv[11]); > + > + elan_dbg(client, "[ELAN] %x:%x:%x, :%x:%x:%x\n", buf_recv[2], > + buf_recv[6], buf_recv[10], > + buf_recv[3], buf_recv[7], buf_recv[11]); > + > + if (ts->rows < 2 || ts->cols < 2) { > + dev_err(&client->dev, > + "[ELAN] Invalid resolution (%d, %d)\n", > + ts->rows, ts->cols); > + > + /* set default resolution if TP information is wrong */ > + ts->rows = ELAN_X_MAX; > + ts->cols = ELAN_Y_MAX; > + > + rc = ret_fail; > + } > + > + /* translate trace number to TSP resolution */ > + ts->cols = ELAN_TS_RESOLUTION(ts->cols); > + ts->rows = ELAN_TS_RESOLUTION(ts->rows); > + > + elan_dbg(client, > + "[ELAN] resolution rows=0x%.2x, " > + "cols=0x%.2x\n", > + ts->rows, ts->cols); > + > + return 0; > +} > + > + > +/** > + * elan_touch_get_bc_ver - obtain bootcode data from device > + * @client: the interface we are querying > + > + * > + * Send a bootcode version command and fill the results into the > + * elan device structures. Caller must hold the mutex > + * > + > + * Returns 0 or an error code > + */ > +static int __elan_touch_get_bc_ver(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + const u8 get_bc_ver_cmd[] = {0x53, 0x10, 0x00, 0x01}; > + u8 buf_recv[4]; > + int rc; > + > + /* Command not support in IAP recovery mode */ > + if (test_bit(idx_update_fw, &ts->flags)) > + return 0; > + > + rc = elants_acqurie_data(client, get_bc_ver_cmd, > + buf_recv, sizeof(buf_recv)); > + if (rc < 0) { > + dev_err(&client->dev, > + "elan_ts_acqurie_data failed: get_bc_ver\n"); > + return rc; > + } > + > + ts->major_bc_version = (((buf_recv[1] & 0x0f) << 4) | > + ((buf_recv[2]&0xf0) >> 4)); > + ts->minor_bc_version = (((buf_recv[2] & 0x0f) << 4) | > + ((buf_recv[3]&0xf0) >> 4)); > + > + elan_dbg(client, > + "ELAN TOUCH MAJOR BC VERSION 0x%02x\n", > + ts->major_bc_version); > + elan_dbg(client, > + "ELAN TOUCH MINOR BC VERSION 0x%02x\n", > + ts->minor_bc_version); > + > + return 0; > +} > + > +static int __elan_fastboot(struct i2c_client *client, int *count) > +{ > + int rc = 0; > + > + > + rc = elants_boot(client, elan_i2c_master, E_BOOT_NORM); > + if (rc < 0) { > + if (*count > 0) > + return -EAGAIN; > + return -1; > + } > + > + msleep(100); > + > + return rc; > +} > + > +/** > + * @brief elan_open - open elan device > + * @param input : input device > + * > + */ > +static int elan_open(struct input_dev *input) > +{ > + struct elants_data *ts = input_get_drvdata(input); > + > + dev_err(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + /* wait probe work_func done */ > + while ((ts->status & STA_INIT4) == 0) > + elan_msleep(1); > + > + return 0; > +} > + > +/** > + * @brief elan_close - close input device > + * @param input : input device > + * > + */ > +static void elan_close(struct input_dev *input) > +{ > + struct elants_data *ts = input_get_drvdata(input); > + > + dev_err(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + return; > +} > + > + > +/** > + * @brief \b elan_ts_setup - initialization process. > + * @param client : our i2c client > + * > + * set our TP up > + * -# reset > + * -# hello packet > + * -# fw version > + * -# TP info (resolution) > + * > + */ > +static int __devinit elants_setup(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int rc, tries = 3, count = 3; > + int len = 0; > + bool fastboot = true; > + > +retry: > + /*! Reset */ > + elan_hw_reset(client); > + > + ts->rx_size = queue_header_size; > + > + /* New BootCode */ > + if (fastboot == true) { > + rc = __elan_fastboot(client, &count); > + if (rc < 0) { > + if (rc == -EAGAIN && --count > 0) > + goto retry; > + else { > + len += sprintf(ts->boot_log + len, > + "serious bug, BC may be broken!!\n"); > + return -1; > + } > + } > + fastboot = 0; > + } else { > + /* Wait bootcode timeout 1 second + > + Main-flow initial ~100ms */ > + ssleep(2); > + } > + > + /*! - elan hello packet init */ > + rc = __hello_packet_handler(client); > + if (rc < 0) { > + /* Wrong hello_packet or polling fail, retry */ > + if ((rc == -EINVAL || rc == -ETIMEDOUT) && --tries > 0) { > + dev_err(&client->dev, > + "[ELAN] retries=%d, rc=%d\n", > + tries, rc); > + goto retry; > + } > + > + len += sprintf(ts->boot_log + len, > + "retry=%d polling time-out\n", > + 3-tries); > + > + dev_err(&client->dev, > + "hello packet error.\n"); > + /* Go through down*/ > + > + /* if iap mode enable, return and wait for IAP */ > + if (ts->iap_mode == IAP_MODE_ENABLE) { > + len += sprintf(ts->boot_log + len, "IAP mode enable\n"); > + return rc; > + } > + } > + > + elan_dbg(client, > + "__hello_packet_handler ...\n"); > + > + /*! - elan fw version */ > + rc = __fw_packet_handler(client); > + if (rc < 0) { > + dev_err(&client->dev, "firmware checking error.\n"); > + len += sprintf(ts->boot_log+len, "fw_packet_error=%x:%x\n", > + ts->major_fw_version, ts->minor_fw_version); > + > + if (rc == -EINVAL) { > + len += sprintf(ts->boot_log+len, > + "FW version is empty, IAP enable!!\n"); > + set_bit(idx_update_fw, &ts->flags); > + ts->iap_mode = IAP_MODE_ENABLE; > + } > + > + /* Go through down*/ > + } > + > + elan_dbg(client, "__fw_packet_handler...\n"); > + > + /*! - elan TP information */ > + rc = __touch_get_resolution(client); > + if (rc < 0) { > + dev_err(&client->dev, > + "TP information checking error.\n"); > + len += sprintf(ts->boot_log+len, > + "touch_get_resolution=%x:%x\n", > + ts->rows, ts->cols); > + /* Go through down*/ > + } > + > + elan_dbg(client, > + "__touch_get_resolution...\n"); > + > + > + /* Get TS BootCode version */ > + rc = __elan_touch_get_bc_ver(client); > + if (rc < 0) { > + dev_err(&client->dev, > + "TP get BC version error.\n"); > + len += sprintf(ts->boot_log+len, > + "touch_get_BC_ver=%x:%x\n", > + ts->major_bc_version, ts->major_bc_version); > + /* Go through down*/ > + } > + > + if (len == 0) > + len += sprintf(ts->boot_log, "boot success!!\n"); > + > + return rc; > + > +} > + > + > +static int elants_get_power_state(struct i2c_client *client) > +{ > + int rc = 0; > + const uint8_t cmd[] = {cmd_header_byte_read, 0x50, 0x00, 0x01}; > + uint8_t buf[4], power_state; > + > + rc = elants_acqurie_data(client, cmd, buf, 4); > + if (rc) > + return rc; > + > + power_state = buf[1]; > + elan_dbg(client, > + "dump repsponse: %0x\n", power_state); > + power_state = (power_state & PWR_STATE_MASK) >> 3; > + elan_dbg(client, > + "power state = %s\n", > + power_state == PWR_STATE_DEEP_SLEEP ? > + "Deep Sleep" : "Normal/Idle"); > + > + return power_state; > +} > + > + > +/** > + * @brief \b elan_ts_recv_data - received TP data > + * @param client: our i2c device > + * @param buf : buffer for put received data > + * > + * received data from TP device. > + */ > +static int elants_recv_data(struct i2c_client *client, uint8_t *buf) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int rc = 0, bytes_to_recv; > + > + dev_dbg(&client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + if (buf == NULL) > + return -EINVAL; > + > + mutex_lock(&ts->tr_mutex); > + > + bytes_to_recv = ts->rx_size; > + rc = i2c_master_recv(client, buf, bytes_to_recv); > + > + dev_dbg(&client->dev, > + "[ELAN] %d:%d:%x:%x, addr=%x\n", bytes_to_recv, rc, > + buf[0], buf[34], client->addr); > + dev_dbg(&client->dev, > + "[ELAN] %x:%x:%x:%x:%x:%x\n", buf[0], buf[1], buf[2], > + buf[3], buf[4], buf[5]); > + > + if (rc != bytes_to_recv) { > + dev_err(&client->dev, > + "%s: i2c_master_recv error?!\n", > + __func__); > + rc = -EINVAL; > + } > + mutex_unlock(&ts->tr_mutex); > + > + return rc; > +} > + > +/** > + * elan_touch_pull_frame - pull a frame from the fifo > + * @ed: our elan touch device > + * @ehr: return buffer for the header > + * @buf: data buffer > + * > + * Pulls a frame from the FIFO into the provided ehr and data buffer. > + * The data buffer must be at least cmd_response_len bytes long. > + */ > +static int elan_touch_pull_frame(struct elants_data *ts, u8 *buf) > +{ > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + WARN_ON(kfifo_out_locked(&ts->fifo, buf, cmd_response_len, > + &ts->rx_kfifo_lock) > + != cmd_response_len); > + return cmd_response_len; > +} > + > + > +/** > + * elan_touch_fifo_clean_old - Make room for new frames > + * @ed: our elan touch device > + * @room: space needed > + * > + * Empty old frames out of the FIFO until we can fit the new one into > + * the other end. > + */ > +static void elan_touch_fifo_clean_old(struct elants_data *ts, int room) > +{ > + u8 buffer[cmd_response_len]; > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + while (kfifo_len(&ts->fifo) + room >= FIFO_SIZE) > + elan_touch_pull_frame(ts, buffer); > +} > + > + > +/** @brief \b elan_ts_GetRepoInfo - parse Multi-queue report header > + * @param client : our i2c device > + * @param buf : buffer data > + * > + * parsing report header and get data length. > + * > + */ > +static int elants_GetRepoInfo(struct i2c_client *client, uint8_t *buf) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + struct multi_queue_header *buff = (struct multi_queue_header *)buf; > + const u8 wait_packet[4] = {0x64, 0x64, 0x64, 0x64}; > + int times = 10, rc = 0; > + > + switch (buf[idx_finger_header]) { > + case cmd_header_byte_hello: > + if (!memcmp(buf, hello_packet, 4)) > + ts->wdt_reset++; > + return ret_cmdrsp; > + case cmd_header_byte_response: > + /* Queue the data, using the fifo lock to serialize the multiple > + accesses to the FIFO */ > + elan_dbg(client, > + "[ELAN] recv cmd_header_byte_response\n"); > + > + mutex_lock(&ts->fifo_mutex); > + if (kfifo_len(&ts->fifo) + cmd_response_len >= FIFO_SIZE) > + /* Make room, make room */ > + elan_touch_fifo_clean_old(ts, cmd_response_len); > + /* Push the data */ > + kfifo_in_locked(&ts->fifo, buf, > + cmd_response_len, &ts->rx_kfifo_lock); > + mutex_unlock(&ts->fifo_mutex); > + > + elan_dbg(client, > + "[ELAN] wake_up [%02x:%02x:%02x:%02x]\n", > + buf[0], buf[1], buf[2], buf[3]); > + wake_up(&ts->wait); > + return ret_cmdrsp; > + case cmd_header_byte_rek: > + /* re-K comand response, ingore it! */ > + return ret_cmdrsp; > + /* Buffer mode header */ > + case queue_header_byte_normal: > + elan_dbg(client, > + "[ELAN] report_count=%d report_len=%d\n", > + buff->report_count, buff->report_length); > + if (likely(buff->report_count <= 3)) { > + ts->mq_header.report_count = buff->report_count; > + ts->mq_header.report_length = buff->report_length; > + ts->rx_size = ts->mq_header.report_length; > + } else > + return ret_fail; > + > + break; > + case queue_header_byte_wait: > + dev_err(&client->dev, > + "========queue_header_byte_wait %x:%x:%x:%x========\n", > + buf[0], buf[1], buf[2], buf[3]); > + /*! BUGFIX: buff[0] might be wrong (0x63), > + * check buff[1 ~ 3] is enough > + */ > + if (!memcmp(buf+1, &wait_packet[1], 3)) { > + do { > + udelay(30); > + elants_recv_data(client, (uint8_t *)buff); > + } while (buff->packet_id != queue_header_byte_normal && > + --times > 0); > + if (times > 0) > + rc = elants_GetRepoInfo(client, (uint8_t *)buff); > + else > + return ret_fail; > + elan_dbg(client, > + "Detect Wait_Header:rx_size=%d, "\ > + "report_count=%d report_len=%d\n", > + ts->rx_size, > + ts->mq_header.report_count, > + ts->mq_header.report_length); > + } else > + dev_err(&client->dev, > + "[ELAN] ERROR!! wait header:%x:%x:%x:%x\n", > + buf[0], buf[1], buf[2], buf[3]); > + break; > + /* Not buffer mode, it's single word mode */ > + case queue_header_byte_Single: > + ts->mq_header.report_count = 1; > + ts->mq_header.report_length = IDX_PACKET_SIZE_WIDTH; > + ts->rx_size = ts->mq_header.report_length; > + return ts->rx_size; > + break; > + default: > + dev_err(&client->dev, > + "unknown multi-queue command!! --%x %x:%x:%x--\n", > + buf[0], buf[1], buf[2], buf[3]); > + ts->mq_header_fail++; > + > + /* If glitch causes frame error, drop all finger report */ > + ts->rx_size = queue_packet_max_len; > + elants_recv_data(client, (uint8_t *)buff); > + return ret_fail; > + } > + > + return ts->rx_size; > +} > + > + > +/** @brief \b elan_touch_checksum - Add for checksum mechanism > + * @param client : our i2c device > + * @param buf : buffer data > + * > + * caculating checksum for make sure all data validity. > + * > + */ > +static int elan_touch_checksum(struct i2c_client *client, u8 *buf) > +{ > + u8 i = 0, checksum = 0; > + struct elants_data *ts = i2c_get_clientdata(client); > + > + /*! FIXME: checksum wasn't including width byte */ > + for (i = 0; i < IDX_PACKET_SIZE_WIDTH - 6; i++) > + checksum = checksum + buf[i]; > + > + ts->checksum_correct = checksum; > + > + if (checksum != buf[idx_finger_width_checksum]) { > + ts->checksum_fail++; > + dev_err(&client->dev, > + "elan touch checksum fail: %02x:%02x\n", > + checksum, buf[idx_finger_width_checksum]); > + return -EFAULT; > + } > + > + return 0; > +} > + > +/** > + * @brief \b elan_touch_parse_fid - parse the 10 fid bits > + * @param data : the input bit stream > + * @param fid : an array of fid values > + * > + * Unpack the 10 bits into an array. > + * > + * FIXME: Review whether we can't just use << operators after making > + * sure the bits are native endian ? > + */ > +static inline void elan_touch_parse_fid(u8 *data, u8 *fid) > +{ > + fid[0] = (data[0] & 0x01); > + fid[1] = (data[0] & 0x02); > + fid[2] = (data[0] & 0x04); > + fid[3] = (data[0] & 0x08); > + fid[4] = (data[0] & 0x10); > + fid[5] = (data[0] & 0x20); > + fid[6] = (data[0] & 0x40); > + fid[7] = (data[0] & 0x80); > + fid[8] = (data[1] & 0x10); > + fid[9] = (data[1] & 0x20); > +} > + > +/** > + * @brief \b elan_touch_parse_wid - parse the 10 wid bits > + * @param data : the input bit stream > + * @param wid : an array of width level > + * > + * Unpack the 10 bits into an array. > + * > + */ > +static inline void elan_touch_parse_wid(u8 *data, u8 *wid) > +{ > + wid[0] = (data[0] >> 4); > + wid[1] = (data[0] & 0x0f); > + wid[2] = (data[1] >> 4); > + wid[3] = (data[1] & 0x0f); > + wid[4] = (data[2] >> 4); > + wid[5] = (data[2] & 0x0f); > + wid[6] = (data[3] >> 4); > + wid[7] = (data[3] & 0x0f); > + wid[8] = (data[4] >> 4); > + wid[9] = (data[4] & 0x0f); > +} > + > + > +static inline int elants_parse_xy( > + uint8_t *data, > + uint16_t *x, > + uint16_t *y) > +{ > + *x = *y = 0; > + > + *x = (data[0] & 0xf0); > + *x <<= 4; > + *x |= data[1]; > + > + *y = (data[0] & 0x0f); > + *y <<= 8; > + *y |= data[2]; > + > + return 0; > +} > + > +/* transition stage for lookup by table, maybe update finger report > + using by Win8 50Byte format that having actual value for X, Y width */ > +static inline int elan_lookup_wid( > + u8 data, > + u16 *w, > + u16 *h) > +{ > + static u16 pre_w, pre_h, cur_w, cur_h; > + const u8 width_lookup_table[15][2] = { > + {3, 2}, {3, 2}, {6, 3}, > + {6, 3}, {10, 3}, {15, 4}, > + {15, 5}, {15, 5}, {15, 5}, > + {15, 5}, {15, 5}, {15, 5}, > + {15, 5}, {15, 5}, {15, 5}, > + }; > + > + cur_w = width_lookup_table[data][0] * 17; > + cur_h = width_lookup_table[data][1] * 17; > + > + /* IIR to balance w, h vaule, don't jitter too much */ > + *w = (cur_w + pre_w) >> 1; > + *h = (cur_h + pre_h) >> 1; > + > + pre_w = cur_w; > + pre_h = cur_h; > + > + return 0; > +} > + > +static int elan_mt_compute_slot(struct mt_device *td, > + struct input_dev *input) > +{ > + return input_mt_get_slot_by_key(input, td->curdata.contactid); > +} > + > +/* > + * this function is called when a whole contact has been processed, > + * so that it can assign it to a slot and store the data there > + */ > +static void elan_mt_complete_slot(struct mt_device *td, > + struct input_dev *input) > +{ > + struct elants_data *ts = > + container_of(td, struct elants_data, td); > + > + if (td->curvalid) { > + int slotnum = elan_mt_compute_slot(td, input); > + struct mt_slot *s = &td->curdata; > + > + if (slotnum < 0 || slotnum >= td->maxcontacts) > + return; > + > + input_mt_slot(input, slotnum); > + input_mt_report_slot_state(input, MT_TOOL_FINGER, > + s->touch_state); > + if (s->touch_state) { > + /* this finger is on the screen */ > + int wide = (s->w > s->h); > + /* divided by two to match visual scale of touch */ > + int major = max(s->w, s->h) >> 1; > + int minor = min(s->w, s->h) >> 1; > + > + elan_dbg(ts->client, > + "[ELAN] slot=%d x=%x y=%x w=%x h=%x\n", > + slotnum, s->x, s->y, major, minor); > + > + input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x); > + input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y); > + input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); > + input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p); > + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); > + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); > + } > + } > + > + td->num_received++; > +} > + > +/* > + * this function is called when a whole packet has been received and processed, > + * so that it can decide what to send to the input layer. > + */ > +static void mt_sync_frame(struct mt_device *td, struct input_dev *input) > +{ > + input_mt_sync_frame(input); > + input_sync(input); > + td->num_received = 0; > +} > + > + > +/** @brief \b elan_mt_event - process finger reports > + * @param ts: our touchscreen > + * @param finger_stat : number of fingers in packet > + * @param buf : received buffer > + * > + * Walk the received report and process the finger data, extracting > + * and reporting co-ordinates. No locking is needed here as the workqueue > + * does our threading for us. > + */ > +static int elan_mt_event( > + struct elants_data *ts, > + int finger_stat, > + u8 *buf) > +{ > + int i; > + u8 fid[MAX_CONTACT_NUM], wid[MAX_CONTACT_NUM]; > + u16 x, y, w, h; > + struct i2c_client *client = ts->client; > + struct mt_device *td = &ts->td; > + > + dev_dbg(&client->dev, > + "[ELAN] Enter elan_mt_event Func\n"); > + > + /* Parsing Finger, Width field */ > + elan_touch_parse_fid(&buf[idx_finger_state], &fid[0]); > + elan_touch_parse_wid(&buf[idx_finger_width], &wid[0]); > + > + /* number of fingers expects in this frame */ > + td->num_expected = finger_stat; > + for (i = 0; i < td->maxcontacts; i++) { > + if (finger_stat == 0) > + break; > + > + /* tracking id */ > + td->curdata.contactid = (fid[i] > 0) ? i+1 : 0; > + > + if (td->curdata.contactid == 0) > + continue; > + > + td->curdata.touch_state = true; > + > + elants_parse_xy(&buf[3+i*3], &x, &y); > + td->curdata.x = x; > + td->curdata.y = y; > + > + elan_lookup_wid(wid[i], &w, &h); > + td->curdata.w = w; > + td->curdata.h = h; > + > + finger_stat--; > + > + elan_mt_complete_slot(td, ts->input); > + } > + > + if (td->num_received >= td->num_expected) > + mt_sync_frame(td, ts->input); > + > + return 1; > +} > + > + > + > +/** @brief \b elants_report_data - report finger report to user space. > + * @param client : our i2c device > + * @param buf : raw data from TP device. > + * > + * - reporting finger data to user space. > + * - packet_fail count > + * > + */ > +static void elants_report_data(struct i2c_client *client, uint8_t *buf) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + > + switch (buf[idx_finger_header]) { > + case idx_coordinate_packet_4_finger: > + case idx_coordinate_packet_10_finger: { > + u8 finger_stat = buf[idx_finger_total] & 0x0f; > + elan_dbg(client, > + "[ELAN] finger_stat == %d\n", finger_stat); > + elan_dbg(client, > + "[ELAN] finger:%x:%x:%x:%x:%x\n", > + buf[0], buf[1], buf[2], buf[3], buf[4]); > + > + /* Enter right process, reset int_status*/ > + ts->polling.int_status = 0; > + ts->packet_received++; > + > + if (likely(finger_stat != 0)) { > + ts->td.curvalid = true; > + ts->touched_sync++; > + } else > + ts->no_touched_sync++; > + > + /* Handle mt event */ > + elan_mt_event(ts, finger_stat, buf); > + } > + break; > + default: > + ts->header_fail++; > + dev_err(&client->dev, > + "[ELAN] %s: unknown packet type: %x:%x:%x:%x\n", > + __func__, buf[0], buf[1], buf[2], buf[3]); > + break; > + } > + > + return; > +} > + > +/** @brief \b elants_drop_packet - err handler that drop all packet. > + * > + * mutex protection will at outside this function. > + * > + */ > +static void elants_drop_packet(struct elants_data *ts) > +{ > + uint8_t buf[queue_packet_max_len] = {0x0}; > + > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return; > + > + if (gpio_get_value(ts->intr_gpio) != 0) > + goto end; > + > + /* -# Read multi_queue header */ > + ts->rx_size = queue_header_size; > + if (elants_recv_data(ts->client, buf) < 0) > + goto end; > + > + /* -# Get multi_queue header info*/ > + if (elants_GetRepoInfo(ts->client, buf) > 0) { > + /* 3. Get finger report data */ > + elants_recv_data(ts->client, buf); > + udelay(10); > + if (gpio_get_value(ts->intr_gpio) != 0) > + goto end; > + } > + > + /* -#received all packet till ts->intr pull high */ > + ts->rx_size = 1; > + while (gpio_get_value(ts->intr_gpio) == 0) { > + elants_recv_data(ts->client, buf); > + udelay(10); > + } > + > +end: > + ts->rx_size = queue_header_size; > + dev_dbg(&ts->client->dev, > + "[ELAN] Leave %s\n", __func__); > + > + return; > +} > + > + > + > +/** @brief \b elan_ts_pollWork_func - regular processing > + * @param work : pass from kernel > + * > + * poll_timer polled processing to occur > + * elan_ts_pollWork_func() to check if our ts > + * is abnormal. > + * > + */ > +static void elants_pollWork_func(struct work_struct *work) > + > +{ > + struct elants_data *ts = > + container_of(work, struct elants_data, pollingwork); > + > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + goto fail; > + > + if (gpio_get_value(ts->intr_gpio) != 0) > + goto fail; > + else { > + ts->polling.int_status++; > + if (ts->polling.int_status < 3) > + goto fail; > + } > + > + /* - we use mutex_trylock() here since polling is not very important */ > + if (!mutex_trylock(&ts->mutex)) { > + elan_dbg(ts->client, > + "[ELAN] trylock fail! return...\n"); > + goto fail; > + } > + > + if (test_bit(idx_finger_report, &ts->flags)) { > + elan_dbg(ts->client, > + "[ELAN] 1.finger_Report processing ... ignore!!\n"); > + goto unlock; > + } > + > + if (test_bit(idx_cmd_handshake, &ts->flags)) { > + elan_dbg(ts->client, > + "[ELAN] 2.command processing ... ignore!!\n"); > + goto unlock; > + } > + > + dev_err(&ts->client->dev, > + "[ELAN] Force to release intr_gpio!!\n"); > + > + ts->drop_frame++; > + elants_drop_packet(ts); > + > +unlock: > + mutex_unlock(&ts->mutex); > + > +fail: > + return; > +} > + > +static irqreturn_t elants_work_func(int irq, void *work) > +{ > + struct elants_data *ts = work; > + uint8_t buf[queue_packet_max_len] = {0x0}; > + u8 pos = 0, rc; > + > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + if (test_bit(idx_update_fw, &ts->flags)) > + return IRQ_HANDLED; > + > + /* - this means that we have already serviced it or glich happen!! */ > + if (gpio_get_value(ts->intr_gpio) != 0) { > + dev_dbg(&ts->client->dev, > + "[ELAN] Leave %s(gpio)\n", __func__); > + return IRQ_HANDLED; > + } > + > + mutex_lock(&ts->mutex); > + > + set_bit(idx_finger_report, &ts->flags); > + > + /* - Read multi_queue header */ > + if (elants_recv_data(ts->client, buf) < 0) > + goto fail; > + > + /* - Get multi_queue header info */ > + rc = elants_GetRepoInfo(ts->client, buf); > + if (rc < 0 || rc == ret_cmdrsp) > + goto fail; > + > + /* - Get finger report data */ > + if (elants_recv_data(ts->client, buf) < 0) > + goto fail; > + > + clear_bit(idx_finger_report, &ts->flags); > + > + mutex_unlock(&ts->mutex); > + > + /* - parsing report and send out */ > + while (ts->mq_header.report_count--) { > + if (elan_touch_checksum(ts->client, buf + pos) == 0) > + elants_report_data(ts->client, buf + pos); > + pos = pos + IDX_PACKET_SIZE_WIDTH; > + udelay(10); > + } > + > + ts->rx_size = queue_header_size; > + dev_dbg(&ts->client->dev, > + "[ELAN] Leave %s\n", __func__); > + return IRQ_HANDLED; > + > +fail: > + clear_bit(idx_finger_report, &ts->flags); > + mutex_unlock(&ts->mutex); > + ts->rx_size = queue_header_size; > + > + dev_dbg(&ts->client->dev, > + "[ELAN] Leave %s(Fail)\n", __func__); > + return IRQ_HANDLED; > +} > + > +/** > + * @brief \b elants_poll_timer_func - err handler when intr_gpio is low but no isr > serviced it. > + * @param data : our ts > + * > + * intr_gpio polling checking, it'll force to get data if intr_gpio is low > + * and not in isr routine. > + * > + */ > +static void elants_poll_timer_func(unsigned long data) > +{ > + struct elants_data *ts = (struct elants_data *)data; > + struct elan_polling *timer = &ts->polling; > + > + dev_dbg(&ts->client->dev, > + "[ELAN] Enter %s\n", __func__); > + > + /* - ignore it if normal work is processing */ > + if (work_pending(&ts->work)) { > + dev_dbg(&ts->client->dev, > + "[ELAN] 1.work_pending ... ignore!!\n"); > + goto reset; > + } > + > + /* - ignore it if poll_timer work is processing */ > + if (work_pending(&ts->pollingwork)) { > + dev_dbg(&ts->client->dev, > + "[ELAN] 2.work_pending ... ignore!!\n"); > + goto reset; > + } > + > + if (!queue_work(timer->elan_wq, &ts->pollingwork)) > + dev_err(&ts->client->dev, > + "[ELAN] pollWork active failed!!\n"); > + > +reset: > + timer->timer.expires = jiffies + 10 * HZ; > + add_timer(&ts->polling.timer); > + > + return; > +} > + > +static irqreturn_t elants_irq_handler(int irq, void *dev_id) > +{ > + struct elants_data *ts = dev_id; > + struct i2c_client *client = ts->client; > + > + dev_dbg(&client->dev, "[ELAN] %s\n", __func__); > + > + ts->irq_received++; > + > + return IRQ_WAKE_THREAD; > +} > + > + > +static int elants_register_interrupt(struct i2c_client *client) > +{ > + struct elants_data *ts = i2c_get_clientdata(client); > + int err = -1; > + > + if (client->irq) { > + > + ts->use_irq = 1; > + > + err = request_threaded_irq(client->irq, elants_irq_handler, > + elants_work_func, > + IRQF_TRIGGER_FALLING | > IRQF_ONESHOT, > + client->name, ts); > + if (err) { > + dev_err(&client->dev, > + "%s: request_irq %d failed\n", > + __func__, client->irq); > + goto err; > + } > + > + ts->status |= STA_USE_IRQ; > + > + elan_dbg(client, > + "[ELAN] %s in interrupt mode\n", ts->input->name); > + } > +err: > + return err; > +} > + > +static int remove_elants(struct i2c_client *client) > +{ > + int ret = 0; > + struct elants_data *ts = i2c_get_clientdata(client); > + > + if (&client->dev.kobj) > + sysfs_remove_group(&client->dev.kobj, &elan_attribute_group); > + > + if (ts->use_irq) { > + if (client->irq) > + free_irq(client->irq, ts); > + } > + > + input_mt_destroy_slots(ts->input); > + > + if (ts->input) > + input_unregister_device(ts->input); > + > + if (ts->polling.elan_wq) > + destroy_workqueue(ts->polling.elan_wq); > + > + if (&ts->polling.timer) { > + ret = del_timer(&ts->polling.timer); > + if (ret != 0) > + dev_err(&client->dev, > + "[ELAN] del_timer fail!!\n"); > + } > + > + if (&ts->mutex) > + mutex_destroy(&ts->mutex); > + if (&ts->tr_mutex) > + mutex_destroy(&ts->tr_mutex); > + if (&ts->fifo_mutex) > + mutex_destroy(&ts->fifo_mutex); > + > + if (ts->fw_enabled) { > + ret = misc_deregister(&ts->firmware); > + if (ret < 0) > + dev_err(&client->dev, > + "[ELAN] misc_deregister fail!!\n"); > + } > + > + kfree(ts->td.slots); > + > + /* free kfifo */ > + kfifo_free(&ts->fifo); > + kfree(ts); > + > + return ret; > +} > + > + > +/** > + * probe_thread_func - init touch device. > + * @work: /int work queue > + * > + * Perform real probe for our I2C device and if successful configure > + * it up as an input device. If not then clean up and return an error > + * code. > + */ > + > +static int probe_thread_func(void *data) > +{ > + struct elants_data *ts = data; > + struct i2c_client *client = ts->client; > + int err = 0; > + > + mutex_lock(&ts->mutex); > + > + err = elants_setup(client); > + if (err < 0) { > + dev_err(&client->dev, > + "[ELAN] %s probe failed\n", > + ELAN_DEV_NAME); > + /* User can IAP anyway, continue */ > + } > + > + set_bit(BTN_TOUCH, ts->input->keybit); > + > + /*! - Single touch input params setup */ > + input_set_abs_params(ts->input, ABS_X, 0, ts->cols, 0, 0); > + input_set_abs_params(ts->input, ABS_Y, 0, ts->rows, 0, 0); > + input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0); > + > + /*! @warning FIXME: ABS_MT_PRESSURE can be supported by FW. > + currently we have done it by ABS_MT_WIDTH_MAJOR */ > + /*! - Multitouch input params setup */ > + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->cols, 0, 0); > + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->rows, 0, 0); > + input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); > + input_set_abs_params(ts->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0); > + > + /* not test, keep mark for less Android-ICS */ > + input_set_abs_params(ts->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); > + > + __set_bit(EV_ABS, ts->input->evbit); > + __set_bit(EV_SYN, ts->input->evbit); > + > + input_set_drvdata(ts->input, ts); > + > + err = input_register_device(ts->input); > + if (err) { > + dev_err(&client->dev, > + "[ELAN] %s unable to register input device\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + ts->td.slots = kzalloc(MAX_CONTACT_NUM * sizeof(struct mt_slot), > + GFP_KERNEL); > + if (!ts->td.slots) { > + dev_err(&client->dev, > + "cannot allocate multitouch slots\n"); > + goto fail_un; > + } > + ts->td.maxcontacts = MAX_CONTACT_NUM; > + ts->td.mt_flags |= INPUT_PROP_DIRECT; > + > + input_mt_init_slots(ts->input, ts->td.maxcontacts, ts->td.mt_flags); > + /* set frame rate size as 100fps */ > + input_set_events_per_packet(ts->input, 100); > + > + /*! @warning If the firmware device fails > + * we carry on as it doesn't stop normal > + usage */ > + private_ts = &ts->firmware; > + if (elants_register_interrupt(ts->client) < 0) { > + dev_err(&client->dev, > + "[ELAN] %s register_interrupt failed!\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + /*! - Register SW watchdog timer */ > + init_timer(&ts->polling.timer); > + /*! - check intr_gpio every 10secs */ > + ts->polling.timer.expires = jiffies + 10 * HZ; > + ts->polling.timer.function = &elants_poll_timer_func; > + ts->polling.timer.data = (unsigned long)ts; > + add_timer(&ts->polling.timer); > + > + mutex_unlock(&ts->mutex); > + > + ts->status |= STA_INIT4; > + > + return 0; > + > +fail_un: > + mutex_unlock(&ts->mutex); > + remove_elants(client); > + return err; > +} > + > + > + > +/** > + * @brief elants_probe - probe for touchpad > + * @param client : our I2C client > + * > + * Perform setup and probe for our I2C device and if successful configure > + * it up as an input device. If not then clean up and return an error > + * code. > + */ > +static int __devinit elants_probe( > + struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + long err = -1; > + struct elan_i2c_platform_data *pdata = NULL; > + struct elants_data *ts = > + kzalloc(sizeof(struct elants_data), GFP_KERNEL); > + > + if (ts == NULL) > + return -ENOMEM; > + > + ts->status |= STA_PROBED; > + > + mutex_init(&ts->mutex); > + mutex_init(&ts->tr_mutex); > + mutex_init(&ts->fifo_mutex); > + init_waitqueue_head(&ts->wait); > + spin_lock_init(&ts->rx_kfifo_lock); > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + dev_err(&client->dev, > + "[ELAN] %s: i2c check functionality error\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + /*! - Regular polling Process */ > + ts->polling.elan_wq = create_singlethread_workqueue("elan_poll_wq"); > + if (!ts->polling.elan_wq) { > + dev_err(&client->dev, > + "[ELAN] %s: create workqueue failed\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + /* INIT polling machinams */ > + INIT_WORK(&ts->pollingwork, elants_pollWork_func); > + > + pdata = client->dev.platform_data; > + if (!pdata) { > + dev_err(&client->dev, > + "[ELAN] %s no platform data\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + ts->status &= STA_INIT; > + > + ts->intr_gpio = pdata->intr_gpio; > + ts->rst_gpio = pdata->rst_gpio; > + /* set initial i2c address */ > + client->addr = elan_i2c_master; > + ts->i2caddr = client->addr; > + > + elan_dbg(client, > + "reset=%d, intr=%d\n", ts->rst_gpio, ts->intr_gpio); > + > + ts->client = client; > + i2c_set_clientdata(client, ts); > + > + /* INIT kfifo */ > + err = kfifo_alloc(&ts->fifo, FIFO_SIZE, GFP_KERNEL); > + if (!kfifo_initialized(&ts->fifo)) { > + dev_err(&client->dev, > + "%s error kfifo_alloc\n", __func__); > + goto fail_un; > + } > + > + ts->status &= STA_INIT2; > + > + ts->input = input_allocate_device(); > + if (ts->input == NULL) { > + dev_err(&client->dev, > + "[ELAN] %s Failed to allocate input device\n", > + ELAN_DEV_NAME); > + goto fail_un; > + } > + > + ts->input->name = ELAN_DEV_NAME; > + ts->input->open = elan_open; > + ts->input->close = elan_close; > + > + /* Says HELLO to touch device */ > + ts->thread = kthread_run(probe_thread_func, ts, client->name); > + if (IS_ERR(ts->thread)) { > + err = PTR_ERR(ts->thread); > + goto fail_un; > + } > + > + ts->status &= STA_INIT3; > + > + /* - register sysfs @} */ > + elan_dbg(client, > + "[ELAN] create sysfs!!\n"); > + if (sysfs_create_group(&client->dev.kobj, &elan_attribute_group)) > + dev_err(&client->dev, > + "[ELAN] sysfs create group error\n"); > + > + > + return 0; > + > +fail_un: > + remove_elants(client); > + return err; > +} > + > +static int __devexit elants_remove(struct i2c_client *client) > +{ > + return remove_elants(client); > +} > + > +#ifdef CONFIG_PM_SLEEP > +/** @brief \b elan_ts_suspend - enter sleep mode > + * > + * when Suspend mode, disable_irq and cancel work queue. > + * > + */ > +static int elants_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + const u8 set_sleep_cmd[] = {0x54, 0x50, 0x00, 0x01}; > + int rc = 0; > + > + dev_err(&client->dev, > + "[ELAN] %s: enter\n", __func__); > + > + /* Command not support in IAP recovery mode */ > + if (test_bit(idx_update_fw, &ts->flags)) > + return 0; > + > + disable_irq(client->irq); > + cancel_work_sync(&ts->work); > + > + mutex_lock(&ts->mutex); > + rc = elants_set_data(client, > + set_sleep_cmd, sizeof(set_sleep_cmd)); > + > + if (rc < 0) > + goto end; > + > + ts->power_state = 0; > + /* de-active timer */ > + del_timer_sync(&ts->polling.timer); > + > + > +end: > + mutex_unlock(&ts->mutex); > + return rc; > +} > + > + > +/** @brief \b elan_ts_resume - enter wake-up mode > + * > + * when Wake-up mode, enable_irq. > + * > + */ > +static int elants_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elants_data *ts = i2c_get_clientdata(client); > + const u8 set_active_cmd[] = {0x54, 0x58, 0x00, 0x01}; > + int rc = 0, retry = 5; > + > + dev_err(&client->dev, > + "[ELAN] %s: enter\n", __func__); > + > + /* Command not support in IAP recovery mode */ > + if (test_bit(idx_update_fw, &ts->flags)) > + return 0; > + > + mutex_lock(&ts->mutex); > + > + do { > + rc = elants_set_data(client, > + set_active_cmd, sizeof(set_active_cmd)); > + elan_msleep(2); > + rc = elants_get_power_state(client); > + if (unlikely(rc != PWR_STATE_NORMAL)) > + dev_err(&client->dev, > + "[ELAN] %s: wake up tp failed! err = %d\n", > + __func__, rc); > + else > + break; > + } while (--retry); > + > + ts->power_state = 1; > + mutex_unlock(&ts->mutex); > + > + /* re-active poll timer */ > + mod_timer(&ts->polling.timer, jiffies + 10 * HZ); > + > + enable_irq(client->irq); > + > + return rc; > +} > +#endif > + > +static SIMPLE_DEV_PM_OPS(elants_pm, elants_suspend, elants_resume); > + > +/*! brief system registeration */ > +static const struct i2c_device_id elan_ts_id[] = { > + { ELAN_DEV_NAME, 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, elan_ts_id); > + > +/*! brief system registeration */ > +static struct i2c_driver elan_ts_driver = { > + .probe = elants_probe, > + .remove = __devexit_p(elants_remove), > + .id_table = elan_ts_id, > + .driver = { > + .name = ELAN_DEV_NAME, > + .owner = THIS_MODULE, > + .bus = &i2c_bus_type, > + .pm = &elants_pm, > + }, > +}; > + > +module_i2c_driver(elan_ts_driver); > + > + > +MODULE_VERSION(DRIVER_VERSION); > +MODULE_DESCRIPTION("Elan Microelectronics Touchpanels"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/i2c/elants.h b/include/linux/i2c/elants.h > new file mode 100644 > index 0000000..df46e1e > --- /dev/null > +++ b/include/linux/i2c/elants.h > @@ -0,0 +1,56 @@ > +#ifndef _LINUX_I2C_ELANTS_H > +#define _LINUX_I2C_ELANTS_H > + > +#define ELAN_DEV_NAME "elants_i2c" > + > +/* set TSP resolution by actual TPM */ > +#define ELAN_X_MAX 2944 > +#define ELAN_Y_MAX 1856 > + > + > +/*! @brief \b platform data > + * @param intr_gpio : gpio pin > + * @param rst_gpio : interuption pin > + * > + * Platform data, all platform dependent variable should put here. > + * > + */ > +struct elan_i2c_platform_data { > + unsigned short version; > + unsigned int abs_x_min; > + unsigned int abs_x_max; > + unsigned int abs_y_min; > + unsigned int abs_y_max; > + int intr_gpio; > + int rst_gpio; > +}; > + > +/*! @brief \b ioctl command definition. > + * @param IOCTL_I2C_SLAVE : set i2c address that would be controled right now. > + * @param IOCTL_MAJOR_FW_VER : fw major number > + * @param IOCTL_MINOR_FW_VER : fw minor number > + * @param IOCTL_RESET : Hardware Reset > + * @param IOCTL_SET_COMMAND : control command set to TP device. > + * @param IOCTL_GET_COMMAND : get response from our TP device. > + * @param IOCTL_IAP_ENABLE : Enter IAP mode > + * @param IOCTL_IAP_DISABLE : Leave IAP mode > + * @param IOCTL_I2C_INT : gpio status > + * > + * > + * ioctl command, easy user to control our TP from application. > + * > + */ > +#define ELAN_IOCTLID 0xD0 > +#define IOCTL_I2C_SLAVE _IOW(ELAN_IOCTLID, 1, int) > +#define IOCTL_MAJOR_FW_VER _IOR(ELAN_IOCTLID, 2, int) > +#define IOCTL_MINOR_FW_VER _IOR(ELAN_IOCTLID, 3, int) > +#define IOCTL_RESET _IOW(ELAN_IOCTLID, 4, int) > +#define IOCTL_I2C_INT _IOR(ELAN_IOCTLID, 8, int) > +#define IOCTL_SET_COMMAND _IOW(ELAN_IOCTLID, 9, unsigned long) > +#define IOCTL_GET_COMMAND _IOR(ELAN_IOCTLID, 10, unsigned long) > +#define IOCTL_IAP_ENABLE _IOW(ELAN_IOCTLID, 11, int) > +#define IOCTL_IAP_DISABLE _IOW(ELAN_IOCTLID, 12, int) > +#define IOCTL_CHECK_RECOVERY_MODE _IOR(ELAN_IOCTLID, 13, int) > +#define IOCTL_BOOTCODE_CMD _IOW(ELAN_IOCTLID, 14, unsigned long) > + > +#endif /* _LINUX_I2C_ELANTS_H */ > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/