Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760539Ab2J2S4g (ORCPT ); Mon, 29 Oct 2012 14:56:36 -0400 Received: from mailserver5.natinst.com ([130.164.80.5]:46087 "EHLO spamkiller05.natinst.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759092Ab2J2S4e (ORCPT ); Mon, 29 Oct 2012 14:56:34 -0400 Date: Mon, 29 Oct 2012 12:56:30 -0600 From: Josh Cartwright To: Michal Simek Cc: Arnd Bergmann , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, arm@kernel.org Subject: [PATCH] ARM: zynq: move ttc timer code to drivers/clocksource Message-ID: <20121029185630.GA26149@beefymiracle.amer.corp.natinst.com> MIME-Version: 1.0 User-Agent: Mutt/1.5.21 (2011-07-01) X-MIMETrack: Itemize by SMTP Server on MailServ58-US/AUS/H/NIC(Release 8.5.3FP2 HF169|September 14, 2012) at 10/29/2012 01:56:22 PM, Serialize by Router on MailServ58-US/AUS/H/NIC(Release 8.5.3FP2 HF169|September 14, 2012) at 10/29/2012 01:56:22 PM, Serialize complete at 10/29/2012 01:56:22 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.7.7855,1.0.431,0.0.0000 definitions=2012-10-29_02:2012-10-29,2012-10-29,1970-01-01 signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23411 Lines: 737 Suggested cleanup by Arnd Bergmann. Move the ttc timer.c code to drivers/clocksource, and out of the mach-zynq directory. The common.h (which only held the timer declaration) was renamed to xilinx_ttc.h and moved into include/linux. Signed-off-by: Josh Cartwright Cc: Arnd Bergmann --- arch/arm/mach-zynq/Makefile | 2 +- arch/arm/mach-zynq/common.c | 2 +- arch/arm/mach-zynq/common.h | 24 ---- arch/arm/mach-zynq/timer.c | 298 --------------------------------------- drivers/clocksource/Makefile | 1 + drivers/clocksource/xilinx_ttc.c | 297 ++++++++++++++++++++++++++++++++++++++ include/linux/xilinx_ttc.h | 24 ++++ 7 files changed, 324 insertions(+), 324 deletions(-) delete mode 100644 arch/arm/mach-zynq/common.h delete mode 100644 arch/arm/mach-zynq/timer.c create mode 100644 drivers/clocksource/xilinx_ttc.c create mode 100644 include/linux/xilinx_ttc.h diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 397268c..320faed 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := common.o timer.o +obj-y := common.o diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 93b9105..eecc898 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -31,7 +32,6 @@ #include #include -#include "common.h" static struct of_device_id zynq_of_bus_ids[] __initdata = { { .compatible = "simple-bus", }, diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h deleted file mode 100644 index a009644..0000000 --- a/arch/arm/mach-zynq/common.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file contains common function prototypes to avoid externs - * in the c files. - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_ZYNQ_COMMON_H__ -#define __MACH_ZYNQ_COMMON_H__ - -#include - -extern struct sys_timer xttcpss_sys_timer; - -#endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index c2c96cc..0000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * This file contains driver for the Xilinx PS Timer Counter IP. - * - * Copyright (C) 2011 Xilinx - * - * based on arch/mips/kernel/time.c timer driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include "common.h" - -#define IRQ_TIMERCOUNTER0 42 - -/* - * This driver configures the 2 16-bit count-up timers as follows: - * - * T1: Timer 1, clocksource for generic timekeeping - * T2: Timer 2, clockevent source for hrtimers - * T3: Timer 3, - * - * The input frequency to the timer module for emulation is 2.5MHz which is - * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, - * the timers are clocked at 78.125KHz (12.8 us resolution). - * - * The input frequency to the timer module in silicon will be 200MHz. With the - * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). - */ -#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ -#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ - -#define XTTCPSS_TIMER_BASE TTC0_BASE -#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) -/* - * Timer Register Offset Definitions of Timer 1, Increment base address by 4 - * and use same offsets for Timer 2 - */ -#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */ -#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */ -#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */ -#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* Setup the timers to use pre-scaling */ - -#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) - -/** - * struct xttcpss_timer - This definition defines local timer structure - * - * @base_addr: Base address of timer - **/ -struct xttcpss_timer { - void __iomem *base_addr; -}; - -static struct xttcpss_timer timers[2]; -static struct clock_event_device xttcpss_clockevent; - -/** - * xttcpss_set_interval - Set the timer interval value - * - * @timer: Pointer to the timer instance - * @cycles: Timer interval ticks - **/ -static void xttcpss_set_interval(struct xttcpss_timer *timer, - unsigned long cycles) -{ - u32 ctrl_reg; - - /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); - - __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET); - - /* Reset the counter (0x10) so that it starts from 0, one-shot - mode makes this needed for timing to be right. */ - ctrl_reg |= 0x10; - ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); -} - -/** - * xttcpss_clock_event_interrupt - Clock event timer interrupt handler - * - * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcpss_timer instance - * - * returns: Always IRQ_HANDLED - success - **/ -static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &xttcpss_clockevent; - struct xttcpss_timer *timer = dev_id; - - /* Acknowledge the interrupt and call event handler */ - __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), - timer->base_addr + XTTCPSS_ISR_OFFSET); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction event_timer_irq = { - .name = "xttcpss clockevent", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = xttcpss_clock_event_interrupt, -}; - -/** - * xttcpss_timer_hardware_init - Initialize the timer hardware - * - * Initialize the hardware to start the clock source, get the clock - * event timer ready to use, and hook up the interrupt. - **/ -static void __init xttcpss_timer_hardware_init(void) -{ - /* Setup the clock source counter to be an incrementing counter - * with no interrupt and it rolls over at 0xFFFF. Pre-scale - it by 32 also. Let it start running now. - */ - timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; - - __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_IER_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - - /* Setup the clock event timer to be an interval timer which - * is prescaled by 32 using the interval interrupt. Leave it - * disabled for now. - */ - - timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; - - __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_IER_OFFSET); - - /* Setup IRQ the clock event timer */ - event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; - setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); -} - -/** - * __raw_readl_cycles - Reads the timer counter register - * - * returns: Current timer counter register value - **/ -static cycle_t __raw_readl_cycles(struct clocksource *cs) -{ - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; - - return (cycle_t)__raw_readl(timer->base_addr + - XTTCPSS_COUNT_VAL_OFFSET); -} - - -/* - * Instantiate and initialize the clock source structure - */ -static struct clocksource clocksource_xttcpss = { - .name = "xttcpss_timer1", - .rating = 200, /* Reasonable clock source */ - .read = __raw_readl_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - -/** - * xttcpss_set_next_event - Sets the time interval for next event - * - * @cycles: Timer interval ticks - * @evt: Address of clock event instance - * - * returns: Always 0 - success - **/ -static int xttcpss_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; - - xttcpss_set_interval(timer, cycles); - return 0; -} - -/** - * xttcpss_set_mode - Sets the mode of timer - * - * @mode: Mode to be set - * @evt: Address of clock event instance - **/ -static void xttcpss_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; - u32 ctrl_reg; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - xttcpss_set_interval(timer, TIMER_RATE / HZ); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); - break; - case CLOCK_EVT_MODE_RESUME: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); - break; - } -} - -/* - * Instantiate and initialize the clock event structure - */ -static struct clock_event_device xttcpss_clockevent = { - .name = "xttcpss_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = xttcpss_set_next_event, - .set_mode = xttcpss_set_mode, - .rating = 200, -}; - -/** - * xttcpss_timer_init - Initialize the timer - * - * Initializes the timer hardware and register the clock source and clock event - * timers with Linux kernal timer framework - **/ -static void __init xttcpss_timer_init(void) -{ - xttcpss_timer_hardware_init(); - clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); - - /* Calculate the parameters to allow the clockevent to operate using - integer math - */ - clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); - - xttcpss_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffe, &xttcpss_clockevent); - xttcpss_clockevent.min_delta_ns = - clockevent_delta2ns(1, &xttcpss_clockevent); - - /* Indicate that clock event is on 1st CPU as SMP boot needs it */ - - xttcpss_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&xttcpss_clockevent); -} - -/* - * Instantiate and initialize the system timer structure - */ -struct sys_timer xttcpss_sys_timer = { - .init = xttcpss_timer_init, -}; diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 603be36..f27c7b1 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_ARCH_ZYNQ) += xilinx_ttc.o obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o diff --git a/drivers/clocksource/xilinx_ttc.c b/drivers/clocksource/xilinx_ttc.c new file mode 100644 index 0000000..3296556 --- /dev/null +++ b/drivers/clocksource/xilinx_ttc.c @@ -0,0 +1,297 @@ +/* + * This file contains driver for the Xilinx PS Timer Counter IP. + * + * Copyright (C) 2011 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define IRQ_TIMERCOUNTER0 42 + +/* + * This driver configures the 2 16-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + * + * The input frequency to the timer module in silicon will be 200MHz. With the + * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). + */ +#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ +#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ + +#define XTTCPSS_TIMER_BASE TTC0_BASE +#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */ +#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */ +#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */ +#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 + +/* Setup the timers to use pre-scaling */ + +#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) + +/** + * struct xttcpss_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + **/ +struct xttcpss_timer { + void __iomem *base_addr; +}; + +static struct xttcpss_timer timers[2]; +static struct clock_event_device xttcpss_clockevent; + +/** + * xttcpss_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void xttcpss_set_interval(struct xttcpss_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + + __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET); + + /* Reset the counter (0x10) so that it starts from 0, one-shot + mode makes this needed for timing to be right. */ + ctrl_reg |= 0x10; + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); +} + +/** + * xttcpss_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the xttcpss_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &xttcpss_clockevent; + struct xttcpss_timer *timer = dev_id; + + /* Acknowledge the interrupt and call event handler */ + __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), + timer->base_addr + XTTCPSS_ISR_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction event_timer_irq = { + .name = "xttcpss clockevent", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = xttcpss_clock_event_interrupt, +}; + +/** + * xttcpss_timer_hardware_init - Initialize the timer hardware + * + * Initialize the hardware to start the clock source, get the clock + * event timer ready to use, and hook up the interrupt. + **/ +static void __init xttcpss_timer_hardware_init(void) +{ + /* Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + it by 32 also. Let it start running now. + */ + timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; + + __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_IER_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + + /* Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + + timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; + + __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_IER_OFFSET); + + /* Setup IRQ the clock event timer */ + event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; + setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); +} + +/** + * __raw_readl_cycles - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static cycle_t __raw_readl_cycles(struct clocksource *cs) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; + + return (cycle_t)__raw_readl(timer->base_addr + + XTTCPSS_COUNT_VAL_OFFSET); +} + + +/* + * Instantiate and initialize the clock source structure + */ +static struct clocksource clocksource_xttcpss = { + .name = "xttcpss_timer1", + .rating = 200, /* Reasonable clock source */ + .read = __raw_readl_cycles, + .mask = CLOCKSOURCE_MASK(16), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/** + * xttcpss_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int xttcpss_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + + xttcpss_set_interval(timer, cycles); + return 0; +} + +/** + * xttcpss_set_mode - Sets the mode of timer + * + * @mode: Mode to be set + * @evt: Address of clock event instance + **/ +static void xttcpss_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + u32 ctrl_reg; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + xttcpss_set_interval(timer, TIMER_RATE / HZ); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + case CLOCK_EVT_MODE_RESUME: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + } +} + +/* + * Instantiate and initialize the clock event structure + */ +static struct clock_event_device xttcpss_clockevent = { + .name = "xttcpss_timer2", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = xttcpss_set_next_event, + .set_mode = xttcpss_set_mode, + .rating = 200, +}; + +/** + * xttcpss_timer_init - Initialize the timer + * + * Initializes the timer hardware and register the clock source and clock event + * timers with Linux kernal timer framework + **/ +static void __init xttcpss_timer_init(void) +{ + xttcpss_timer_hardware_init(); + clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); + + /* Calculate the parameters to allow the clockevent to operate using + integer math + */ + clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); + + xttcpss_clockevent.max_delta_ns = + clockevent_delta2ns(0xfffe, &xttcpss_clockevent); + xttcpss_clockevent.min_delta_ns = + clockevent_delta2ns(1, &xttcpss_clockevent); + + /* Indicate that clock event is on 1st CPU as SMP boot needs it */ + + xttcpss_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&xttcpss_clockevent); +} + +/* + * Instantiate and initialize the system timer structure + */ +struct sys_timer xttcpss_sys_timer = { + .init = xttcpss_timer_init, +}; diff --git a/include/linux/xilinx_ttc.h b/include/linux/xilinx_ttc.h new file mode 100644 index 0000000..3606beb --- /dev/null +++ b/include/linux/xilinx_ttc.h @@ -0,0 +1,24 @@ +/* + * This file contains common function prototypes to avoid externs + * in the c files. + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __XILINX_TTC_H__ +#define __XILINX_TTC_H__ + +#include + +extern struct sys_timer xttcpss_sys_timer; + +#endif -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/