Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 30 Oct 2000 08:32:17 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 30 Oct 2000 08:32:07 -0500 Received: from mailhst2.its.tudelft.nl ([130.161.34.250]:44046 "EHLO mailhst2.its.tudelft.nl") by vger.kernel.org with ESMTP id ; Mon, 30 Oct 2000 08:31:54 -0500 Date: Mon, 30 Oct 2000 14:27:39 +0100 From: Erik Mouw To: vwbug Cc: linux-kernel@vger.kernel.org Subject: Re: kernel 2.4.0-test9 nd bttv Message-ID: <20001030142739.A29106@arthur.ubicom.tudelft.nl> In-Reply-To: <39FCD671.A493E2F0@stratos.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <39FCD671.A493E2F0@stratos.net>; from vwbug19@stratos.net on Sun, Oct 29, 2000 at 09:01:21PM -0500 Organization: Eric Conspiracy Secret Labs X-Eric-Conspiracy: There is no conspiracy! X-Loop: erik@arthur.ubicom.tudelft.nl Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Oct 29, 2000 at 09:01:21PM -0500, vwbug wrote: > it look like you didn't add the lines to .config the stupid bttv drivers > that's why mine didnt work with bttv card i have read the .config under > video for linux and found no refernce to bttv??? I'm not sure if this is what you mean, but you have to enable I2C support and I2C bit-banging interfaces to be able to select BT848 support. Erik [happily using his BT848 card under 2.4.0-test10-pre3] -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A.K.Mouw@its.tudelft.nl WWW: http://www-ict.its.tudelft.nl/~erik/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/