Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756985Ab2J3Ja2 (ORCPT ); Tue, 30 Oct 2012 05:30:28 -0400 Received: from smtp207.alice.it ([82.57.200.103]:53319 "EHLO smtp207.alice.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756563Ab2J3JaU (ORCPT ); Tue, 30 Oct 2012 05:30:20 -0400 X-Greylist: delayed 308 seconds by postgrey-1.27 at vger.kernel.org; Tue, 30 Oct 2012 05:30:19 EDT Date: Tue, 30 Oct 2012 10:24:39 +0100 From: Antonio Ospite To: bskeggs@redhat.com Cc: dri-devel@lists.freedesktop.org, David Airlie , linux-kernel@vger.kernel.org Subject: Re: nouveau, linux3.7-rc3: BUG: unable to handle kernel paging request at fffffffffffffff8 Message-Id: <20121030102439.31254089ee80b4a22cb81a5d@studenti.unina.it> In-Reply-To: <1351574241.3810.5.camel@turiel> References: <20121029231624.1476a25a62a0c219cc25627a@studenti.unina.it> <1351574241.3810.5.camel@turiel> X-Mailer: Sylpheed 3.2.0 (GTK+ 2.24.10; x86_64-pc-linux-gnu) X-Face: z*RaLf`X<@C75u6Ig9}{oW$H;1_\2t5)({*|jhM/Vb;]yA5\I~93>J<_`<4)A{':UrE Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 66583 Lines: 1031 On Tue, 30 Oct 2012 15:17:21 +1000 Ben Skeggs wrote: > On Mon, 2012-10-29 at 23:16 +0100, Antonio Ospite wrote: [...] > > The problem presents itself as soon as I use a gnome-shell session from > > gdm3, if I use the fall-back mode (gnome-panel) it does not happen > > immediately, until maybe some processes do something stressful (firefox > > triggered it twice). > If you boot into fallback mode and run glxgears (or whatever, some 3d > app) does this happen too? It does: as soon as I run glxgears the driver crashes. > > Here is the kernel trace, please let me know if the disassembled > > nouveau.o —or any other information— is necessary: > Are you able to post me your entire kernel log from before this happens? I am pasting it below, I noticed in particular the line: nouveau [ DRM] allocated 1024x768 fb: 0x50000, bo ffff88011a025800 I am setting video=1024x768 in the kernel command line because without any resolution set nouveau and my monitor do not get along, but then in Xorg I am using a bigger resolution, this setup works fine in 3.5 tho so maybe it's not that. Full kernel log from boot to crash: imklog 5.8.11, log source = /proc/kmsg started. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.7.0-rc3-ao2 (ao2@jcn) (gcc version 4.7.2 (Debian 4.7.2-4) ) #1 SMP Mon Oct 29 13:14:36 CET 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc3-ao2 root=UUID=614c68fd-bd5f-4627-9f62-1f0cada81683 ro quiet video=1024x768 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e3000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffedfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M3N78-VM, BIOS 1801 09/10/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcff8ffff] [ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcff8ffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcff8ffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff] [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x11fffffff @ [mem 0xcff8e000-0xcff8ffff] [ 0.000000] RAMDISK: [mem 0x368de000-0x37466fff] [ 0.000000] ACPI: RSDP 00000000000fb630 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 0006C (v01 091010 XSDT1648 20100910 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 091010 FACP1648 20100910 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90460 0AF17 (v01 A1041 A1041000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff9e000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00090 (v01 091010 APIC1648 20100910 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 091010 OEMMCFG 20100910 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 091010 OEMB1648 20100910 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000cff9b380 000B8 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000cff9b440 00038 (v01 091010 OEMHPET0 20100910 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cff9e0c0 00124 (v01 091010 AMDINFO 20100910 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cff9e1f0 00284 (v01 091010 NVHDCP 20100910 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9b480 00178 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] [ 0.000000] NODE_DATA [mem 0x11fffc000-0x11fffffff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ba00000-ffff88011effffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xcff8ffff] [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] [ 0.000000] On node 0 totalpages: 982813 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 5 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000 [ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000 [ 0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83776 r8192 d22720 u262144 [ 0.000000] pcpu-alloc: s83776 r8192 d22720 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966679 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc3-ao2 root=UUID=614c68fd-bd5f-4627-9f62-1f0cada81683 ro quiet video=1024x768 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3723324k/4718592k available (3558k kernel code, 787340k absent, 207928k reserved, 3159k data, 616k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6. [ 0.000000] NR_IRQS:33024 nr_irqs:728 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2814.255 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.51 BogoMIPS (lpj=11257020) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004046] Security Framework initialized [ 0.004052] AppArmor: AppArmor disabled by boot time parameter [ 0.004341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010307] Mount-cache hash table entries: 256 [ 0.010522] Initializing cgroup subsys cpuacct [ 0.010525] Initializing cgroup subsys devices [ 0.010526] Initializing cgroup subsys freezer [ 0.010528] Initializing cgroup subsys net_cls [ 0.010530] Initializing cgroup subsys blkio [ 0.010531] Initializing cgroup subsys perf_event [ 0.010558] tseg: 0000000000 [ 0.010572] mce: CPU supports 5 MCE banks [ 0.010581] LVT offset 0 assigned for vector 0xf9 [ 0.010585] process: using AMD E400 aware idle routine [ 0.010588] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.010588] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.010588] tlb_flushall_shift: 4 [ 0.012719] ACPI: Core revision 20120913 [ 0.017978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057675] smpboot: CPU0: AMD Athlon(tm) Processor LE-1660 (fam: 0f, model: 7f, stepping: 02) [ 0.060000] Performance Events: AMD PMU driver. [ 0.060000] ... version: 0 [ 0.060000] ... bit width: 48 [ 0.060000] ... generic registers: 4 [ 0.060000] ... value mask: 0000ffffffffffff [ 0.060000] ... max period: 00007fffffffffff [ 0.060000] ... fixed-purpose events: 0 [ 0.060000] ... event mask: 000000000000000f [ 0.060000] Brought up 1 CPUs [ 0.060000] smpboot: Total of 1 processors activated (5628.51 BogoMIPS) [ 0.060000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.060000] devtmpfs: initialized [ 0.060000] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes) [ 0.060000] regulator-dummy: no parameters [ 0.060000] NET: Registered protocol family 16 [ 0.060000] node 0 link 0: io port [5000, ffffff] [ 0.060000] node 0 link 0: io port [1000, 1fff] [ 0.060000] TOM: 00000000e0000000 aka 3584M [ 0.060000] node 0 link 0: mmio [e0000000, efffffff] [ 0.060000] node 0 link 0: mmio [a0000, bffff] [ 0.060000] node 0 link 0: mmio [e0000000, fe0bffff] [ 0.060000] TOM2: 0000000120000000 aka 4608M [ 0.060000] bus: [bus 00-07] on node 0 link 0 [ 0.060000] bus: 00 [io 0x2000-0xffff] [ 0.060000] bus: 00 [io 0x0000-0x1fff] [ 0.060000] bus: 00 [mem 0xe0000000-0xffffffff] [ 0.060000] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.060000] bus: 00 [mem 0x120000000-0xfcffffffff] [ 0.060000] ACPI: bus type pci registered [ 0.060062] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060064] PCI: not using MMCONFIG [ 0.060065] PCI: Using configuration type 1 for base access [ 0.060789] bio: create slab at 0 [ 0.060866] ACPI: Added _OSI(Module Device) [ 0.060868] ACPI: Added _OSI(Processor Device) [ 0.060870] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.060871] ACPI: Added _OSI(Processor Aggregator Device) [ 0.061912] ACPI: EC: Look up EC in DSDT [ 0.063357] ACPI: Executed 1 blocks of module-level executable AML code [ 0.067945] ACPI: Interpreter enabled [ 0.067950] ACPI: (supports S0 S1 S3 S4 S5) [ 0.067969] ACPI: Using IOAPIC for interrupt routing [ 0.068011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.069584] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.092280] ACPI: No dock devices found. [ 0.092286] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.092508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.092702] PCI host bridge to bus 0000:00 [ 0.092705] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.092708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.092711] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.092713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.092716] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.092718] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff] [ 0.092752] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000 [ 0.093010] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100 [ 0.093017] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff] [ 0.093053] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500 [ 0.093064] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f] [ 0.093079] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f] [ 0.093085] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f] [ 0.093114] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.093130] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000 [ 0.093179] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000 [ 0.093195] pci 0000:00:01.3: reg 10: [mem 0xfcf80000-0xfcffffff] [ 0.093308] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000 [ 0.093378] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310 [ 0.093386] pci 0000:00:02.0: reg 10: [mem 0xfcf7e000-0xfcf7efff] [ 0.093419] pci 0000:00:02.0: supports D1 D2 [ 0.093422] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093436] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320 [ 0.093446] pci 0000:00:02.1: reg 10: [mem 0xfcf7fc00-0xfcf7fcff] [ 0.093487] pci 0000:00:02.1: supports D1 D2 [ 0.093489] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093509] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310 [ 0.093518] pci 0000:00:04.0: reg 10: [mem 0xfcf7d000-0xfcf7dfff] [ 0.093551] pci 0000:00:04.0: supports D1 D2 [ 0.093553] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093568] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320 [ 0.093578] pci 0000:00:04.1: reg 10: [mem 0xfcf7f800-0xfcf7f8ff] [ 0.093618] pci 0000:00:04.1: supports D1 D2 [ 0.093620] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093644] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300 [ 0.093654] pci 0000:00:07.0: reg 10: [mem 0xfcf78000-0xfcf7bfff] [ 0.093695] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.093711] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401 [ 0.093751] pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601 [ 0.093760] pci 0000:00:09.0: reg 10: [io 0xd480-0xd487] [ 0.093764] pci 0000:00:09.0: reg 14: [io 0xd400-0xd403] [ 0.093769] pci 0000:00:09.0: reg 18: [io 0xd080-0xd087] [ 0.093773] pci 0000:00:09.0: reg 1c: [io 0xd000-0xd003] [ 0.093778] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f] [ 0.093782] pci 0000:00:09.0: reg 24: [mem 0xfcf76000-0xfcf77fff] [ 0.093815] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000 [ 0.093825] pci 0000:00:0a.0: reg 10: [mem 0xfcf7c000-0xfcf7cfff] [ 0.093829] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887] [ 0.093834] pci 0000:00:0a.0: reg 18: [mem 0xfcf7f400-0xfcf7f4ff] [ 0.093838] pci 0000:00:0a.0: reg 1c: [mem 0xfcf7f000-0xfcf7f00f] [ 0.093868] pci 0000:00:0a.0: supports D1 D2 [ 0.093870] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093886] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400 [ 0.093910] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093966] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400 [ 0.094187] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094279] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400 [ 0.094498] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.094551] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.094568] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.094582] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.094596] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.094656] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode) [ 0.094661] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.094664] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.094666] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.094669] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.094671] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.094693] pci 0000:02:00.0: [10de:0849] type 00 class 0x030000 [ 0.094701] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.094707] pci 0000:02:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.094713] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit pref] [ 0.094717] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f] [ 0.094722] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref] [ 0.094748] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.094752] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 0.094754] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff] [ 0.094758] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.094905] pci 0000:00:10.0: PCI bridge to [bus 03] [ 0.095082] pci 0000:00:12.0: PCI bridge to [bus 04] [ 0.095139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.095401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.095459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.095498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.095535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.095691] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.095905] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.095906] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.105864] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.105976] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.106088] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.106199] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.106312] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.106421] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.106531] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.106642] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.106752] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.106862] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.106972] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.107082] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.107195] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.107304] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.107414] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.107524] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.107634] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. [ 0.107745] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.107855] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.107966] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.108091] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.108201] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.108312] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.108422] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.108532] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.108642] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.108752] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.108863] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.108973] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.109083] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.109194] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.109304] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.109414] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.109526] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.109638] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.109748] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.109863] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.109975] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.110088] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 [ 0.110201] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.110321] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15 [ 0.110434] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.110546] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *14 [ 0.110659] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.110787] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.110901] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.111018] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *14 [ 0.111132] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.111133] vgaarb: loaded [ 0.111134] vgaarb: bridge control possible 0000:02:00.0 [ 0.111182] PCI: Using ACPI for IRQ routing [ 0.117499] PCI: pci_cache_line_size set to 64 bytes [ 0.117554] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.117556] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff] [ 0.117694] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.117700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.117703] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.119765] Switching to clocksource hpet [ 0.119771] pnp: PnP ACPI init [ 0.119771] ACPI: bus type pnp registered [ 0.119771] pnp 00:00: [bus 00-ff] [ 0.119771] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.119771] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.119771] pnp 00:00: [io 0x0d00-0xffff window] [ 0.119771] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.119771] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.119771] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] [ 0.119771] pnp 00:00: [mem 0xf0000000-0xfed44fff window] [ 0.119771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.119771] pnp 00:01: [dma 4] [ 0.119771] pnp 00:01: [io 0x0000-0x000f] [ 0.119771] pnp 00:01: [io 0x0081-0x0083] [ 0.119771] pnp 00:01: [io 0x0087] [ 0.119771] pnp 00:01: [io 0x0089-0x008b] [ 0.119771] pnp 00:01: [io 0x008f] [ 0.119771] pnp 00:01: [io 0x00c0-0x00df] [ 0.119771] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.119771] pnp 00:02: [io 0x0061] [ 0.119771] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.119771] pnp 00:03: [io 0x00f0-0x00ff] [ 0.119771] pnp 00:03: [irq 13] [ 0.119771] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.119771] pnp 00:04: [io 0x03f0-0x03f5] [ 0.119771] pnp 00:04: [io 0x03f7] [ 0.119771] pnp 00:04: [irq 6] [ 0.119771] pnp 00:04: [dma 2] [ 0.119771] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.120103] pnp 00:05: [io 0x0378-0x037f] [ 0.120112] pnp 00:05: [irq 7] [ 0.120114] pnp 00:05: [dma 0 disabled] [ 0.120442] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.120814] pnp 00:06: [mem 0x000d0000-0x000d3fff window] [ 0.120817] pnp 00:06: [mem 0x000d4000-0x000d7fff window] [ 0.120819] pnp 00:06: [mem 0x000de000-0x000dffff window] [ 0.120822] pnp 00:06: [io 0x0010-0x001f] [ 0.120824] pnp 00:06: [io 0x0022-0x003f] [ 0.120826] pnp 00:06: [io 0x0044-0x004d] [ 0.120828] pnp 00:06: [io 0x0050-0x005f] [ 0.120830] pnp 00:06: [io 0x0062-0x0063] [ 0.120832] pnp 00:06: [io 0x0065-0x006f] [ 0.120835] pnp 00:06: [io 0x0072-0x007f] [ 0.120837] pnp 00:06: [io 0x0080] [ 0.120839] pnp 00:06: [io 0x0084-0x0086] [ 0.120841] pnp 00:06: [io 0x0088] [ 0.120843] pnp 00:06: [io 0x008c-0x008e] [ 0.120846] pnp 00:06: [io 0x0090-0x009f] [ 0.120848] pnp 00:06: [io 0x00a2-0x00bf] [ 0.120850] pnp 00:06: [io 0x00e0-0x00ef] [ 0.120852] pnp 00:06: [io 0x04d0-0x04d1] [ 0.120854] pnp 00:06: [io 0x0800-0x080f] [ 0.120857] pnp 00:06: [io 0x0500-0x057f] [ 0.120859] pnp 00:06: [io 0x0580-0x05ff] [ 0.120861] pnp 00:06: [io 0x0800-0x087f] [ 0.120863] pnp 00:06: [io 0x0880-0x08ff] [ 0.120865] pnp 00:06: [io 0x0d00-0x0d7f] [ 0.120867] pnp 00:06: [io 0x0d80-0x0dff] [ 0.120870] pnp 00:06: [io 0x0900-0x097f] [ 0.120872] pnp 00:06: [io 0x0980-0x09ff] [ 0.120874] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.120877] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.120879] pnp 00:06: [mem 0xfed04000-0xfed04fff] [ 0.120882] pnp 00:06: [mem 0xfee01000-0xfeefffff] [ 0.120889] pnp 00:06: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.120892] pnp 00:06: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.120953] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.120956] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.120959] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.120962] system 00:06: [io 0x0580-0x05ff] has been reserved [ 0.120965] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.120967] system 00:06: [io 0x0880-0x08ff] has been reserved [ 0.120970] system 00:06: [io 0x0d00-0x0d7f] has been reserved [ 0.120973] system 00:06: [io 0x0d80-0x0dff] has been reserved [ 0.120976] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.120979] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.120982] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved [ 0.120985] system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.120988] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.120991] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121105] pnp 00:07: [mem 0xfed00000-0xfed00fff] [ 0.121108] pnp 00:07: [irq 2 disabled] [ 0.121116] pnp 00:07: [irq 8] [ 0.121139] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.121163] pnp 00:08: [io 0x0070-0x0071] [ 0.121184] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.121293] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.121295] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.121298] pnp 00:09: [mem 0xd0000000-0xdfffffff] [ 0.121330] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.121333] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.121336] system 00:09: [mem 0xd0000000-0xdfffffff] has been reserved [ 0.121339] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121367] pnp 00:0a: [io 0x0060] [ 0.121370] pnp 00:0a: [io 0x0064] [ 0.121378] pnp 00:0a: [irq 1] [ 0.121408] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.121590] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.121593] pnp 00:0b: [io 0x0230-0x023f] [ 0.121595] pnp 00:0b: [io 0x0290-0x029f] [ 0.121597] pnp 00:0b: [io 0x0a00-0x0a0f] [ 0.121599] pnp 00:0b: [io 0x0a10-0x0a1f] [ 0.121630] system 00:0b: [io 0x0230-0x023f] has been reserved [ 0.121633] system 00:0b: [io 0x0290-0x029f] has been reserved [ 0.121636] system 00:0b: [io 0x0a00-0x0a0f] has been reserved [ 0.121638] system 00:0b: [io 0x0a10-0x0a1f] has been reserved [ 0.121641] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122300] pnp 00:0c: [io 0x03f8-0x03ff] [ 0.122308] pnp 00:0c: [irq 4] [ 0.122311] pnp 00:0c: [dma 0 disabled] [ 0.122377] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.122437] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.122467] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.122470] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122652] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.122654] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.122657] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.122659] pnp 00:0e: [mem 0x00100000-0xdfffffff] [ 0.122661] pnp 00:0e: [mem 0xfed45000-0xffffffff] [ 0.122698] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.122701] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.122704] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.122706] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.122709] system 00:0e: [mem 0xfed45000-0xffffffff] could not be reserved [ 0.122712] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.123450] pnp: PnP ACPI: found 15 devices [ 0.123451] ACPI: ACPI bus type pnp unregistered [ 0.129768] pci 0000:00:08.0: PCI bridge to [bus 01] [ 0.129777] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 0.129779] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff] [ 0.129782] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfebfffff] [ 0.129785] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.129789] pci 0000:00:10.0: PCI bridge to [bus 03] [ 0.129813] pci 0000:00:12.0: PCI bridge to [bus 04] [ 0.129843] pci 0000:00:08.0: setting latency timer to 64 [ 0.129847] pci 0000:00:0b.0: setting latency timer to 64 [ 0.130077] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.130283] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.130296] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.130298] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.130300] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.130303] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.130305] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed44fff] [ 0.130307] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.130309] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.130312] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.130314] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.130316] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed44fff] [ 0.130318] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.130320] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfebfffff] [ 0.130323] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref] [ 0.130361] NET: Registered protocol family 2 [ 0.131001] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.134528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.134980] TCP: Hash tables configured (established 524288 bind 65536) [ 0.135060] TCP: reno registered [ 0.135071] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.135103] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.135211] NET: Registered protocol family 1 [ 0.135494] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.135699] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.135885] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21 [ 0.136108] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 [ 0.136223] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.136316] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.136414] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.136517] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.136619] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.136742] pci 0000:02:00.0: Boot video device [ 0.136744] PCI: CLS 64 bytes, default 64 [ 0.136792] Unpacking initramfs... [ 0.382182] Freeing initrd memory: 11812k freed [ 0.388080] PCI-DMA: Disabling AGP. [ 0.388154] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.388155] PCI-DMA: using GART IOMMU. [ 0.388158] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.390725] audit: initializing netlink socket (disabled) [ 0.390741] type=2000 audit(1351583134.388:1): initialized [ 0.404155] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.404558] VFS: Disk quotas dquot_6.5.2 [ 0.404578] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404655] msgmni has been set to 7424 [ 0.404813] alg: No test for stdrng (krng) [ 0.404831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.404833] io scheduler noop registered [ 0.404835] io scheduler deadline registered [ 0.404841] io scheduler cfq registered (default) [ 0.405150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.405171] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.405173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.405492] GHES: HEST is not enabled! [ 0.405550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.425970] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.426372] Linux agpgart interface v0.103 [ 0.426464] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.426465] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.426611] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.426708] mousedev: PS/2 mouse device common for all mice [ 0.426758] rtc_cmos 00:08: RTC can wake from S4 [ 0.426999] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.427053] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.427062] cpuidle: using governor ladder [ 0.427063] cpuidle: using governor menu [ 0.427087] drop_monitor: Initializing network drop monitor service [ 0.427154] TCP: cubic registered [ 0.427171] NET: Registered protocol family 10 [ 0.427347] mip6: Mobile IPv6 [ 0.427349] NET: Registered protocol family 17 [ 0.427367] Key type dns_resolver registered [ 0.427552] PM: Hibernation image not present or could not be loaded. [ 0.427560] registered taskstats version 1 [ 0.428254] rtc_cmos 00:08: setting system clock to 2012-10-30 07:45:34 UTC (1351583134) [ 0.429635] Freeing unused kernel memory: 616k freed [ 0.429896] Write protecting the kernel read-only data: 6144k [ 0.431952] Freeing unused kernel memory: 528k freed [ 0.434409] Freeing unused kernel memory: 584k freed [ 0.452405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.566458] ACPI: bus type usb registered [ 0.566489] usbcore: registered new interface driver usbfs [ 0.566502] usbcore: registered new interface driver hub [ 0.571047] Floppy drive(s): fd0 is 1.44M [ 0.599264] usbcore: registered new device driver usb [ 0.599713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.599764] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.599767] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.599773] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.599805] ehci_hcd 0000:00:02.1: debug port 1 [ 0.599809] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.599834] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfcf7fc00 [ 0.605123] FDC 0 is a post-1991 82077 [ 0.608048] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.608090] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.608093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.608095] usb usb1: Product: EHCI Host Controller [ 0.608097] usb usb1: Manufacturer: Linux 3.7.0-rc3-ao2 ehci_hcd [ 0.608099] usb usb1: SerialNumber: 0000:00:02.1 [ 0.608227] hub 1-0:1.0: USB hub found [ 0.608232] hub 1-0:1.0: 6 ports detected [ 0.608388] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.608390] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.608397] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.608423] ehci_hcd 0000:00:04.1: debug port 1 [ 0.608428] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.608452] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfcf7f800 [ 0.618358] SCSI subsystem initialized [ 0.620055] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.620099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.620102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.620104] usb usb2: Product: EHCI Host Controller [ 0.620106] usb usb2: Manufacturer: Linux 3.7.0-rc3-ao2 ehci_hcd [ 0.620108] usb usb2: SerialNumber: 0000:00:04.1 [ 0.620229] hub 2-0:1.0: USB hub found [ 0.620234] hub 2-0:1.0: 6 ports detected [ 0.620747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.620788] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.620790] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.620798] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.620834] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfcf7e000 [ 0.633595] ACPI: bus type scsi registered [ 0.636177] libata version 3.00 loaded. [ 0.678025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.678030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.678032] usb usb3: Product: OHCI Host Controller [ 0.678034] usb usb3: Manufacturer: Linux 3.7.0-rc3-ao2 ohci_hcd [ 0.678036] usb usb3: SerialNumber: 0000:00:02.0 [ 0.678157] hub 3-0:1.0: USB hub found [ 0.678164] hub 3-0:1.0: 6 ports detected [ 0.678392] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.678395] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.678401] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.678435] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfcf7d000 [ 0.734009] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.734012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.734014] usb usb4: Product: OHCI Host Controller [ 0.734016] usb usb4: Manufacturer: Linux 3.7.0-rc3-ao2 ohci_hcd [ 0.734018] usb usb4: SerialNumber: 0000:00:04.0 [ 0.734161] hub 4-0:1.0: USB hub found [ 0.734167] hub 4-0:1.0: 6 ports detected [ 0.736033] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.736247] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 0.736254] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.801050] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:0b:e0:f0:00:ed [ 0.801055] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 0.801261] ahci 0000:00:09.0: version 3.0 [ 0.801455] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 0.801502] ahci 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.801512] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 0.801590] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.801594] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh [ 0.801597] ahci 0000:00:09.0: setting latency timer to 64 [ 0.803522] scsi0 : ahci [ 0.803656] scsi1 : ahci [ 0.803742] scsi2 : ahci [ 0.803828] scsi3 : ahci [ 0.803922] scsi4 : ahci [ 0.804041] scsi5 : ahci [ 0.804091] ata1: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76100 irq 40 [ 0.804094] ata2: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76180 irq 40 [ 0.804096] ata3: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76200 irq 40 [ 0.804098] ata4: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76280 irq 40 [ 0.804100] ata5: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76300 irq 40 [ 0.804101] ata6: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76380 irq 40 [ 1.032014] usb 1-6: new high-speed USB device number 3 using ehci_hcd [ 1.124018] ata5: SATA link down (SStatus 0 SControl 300) [ 1.124034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.124045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.124053] ata2: SATA link down (SStatus 0 SControl 300) [ 1.124063] ata4: SATA link down (SStatus 0 SControl 300) [ 1.124072] ata6: SATA link down (SStatus 0 SControl 300) [ 1.125034] ata1.00: ATA-8: ST3500418AS, CC37, max UDMA/133 [ 1.125036] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.125197] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.125459] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100 [ 1.126540] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.126543] ata1.00: configured for UDMA/133 [ 1.126637] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5 [ 1.165864] usb 1-6: New USB device found, idVendor=058f, idProduct=6362 [ 1.165867] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.165869] usb 1-6: Product: Mass Storage Device [ 1.165871] usb 1-6: Manufacturer: Generic [ 1.165873] usb 1-6: SerialNumber: 058E63626375 [ 1.168361] usbcore: registered new interface driver uas [ 1.524015] usb 4-3: new low-speed USB device number 2 using ohci_hcd [ 1.736031] usb 4-3: New USB device found, idVendor=046d, idProduct=c05a [ 1.736034] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.736036] usb 4-3: Product: USB Optical Mouse [ 1.736038] usb 4-3: Manufacturer: Logitech [ 1.926579] ata3.00: configured for UDMA/100 [ 2.168015] usb 3-3: new full-speed USB device number 2 using ohci_hcd [ 2.390032] usb 3-3: New USB device found, idVendor=0a5c, idProduct=2102 [ 2.390034] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.390037] usb 3-3: Product: ANYCOM Blue USB-200/250 [ 2.390039] usb 3-3: Manufacturer: Broadcom Corp [ 2.728394] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5 [ 2.729595] Initializing USB Mass Storage driver... [ 2.738041] scsi6 : usb-storage 1-6:1.0 [ 2.738261] usbcore: registered new interface driver usb-storage [ 2.738263] USB Mass Storage support registered. [ 2.740108] usbcore: registered new interface driver usbhid [ 2.740111] usbhid: USB HID core driver [ 2.741029] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.741070] sd 0:0:0:0: [sda] Write Protect is off [ 2.741073] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.741091] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.743847] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input1 [ 2.744120] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-3/input0 [ 2.745868] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.745872] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.745984] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.789369] sda: sda1 sda2 < sda5 sda6 sda7 > [ 2.789727] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.794226] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.794288] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.807576] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen [ 2.807621] ata3.00: irq_stat 0x08000002, interface fatal error [ 2.807660] ata3: SError: { Proto } [ 2.807695] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 2.807735] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 2.807735] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error) [ 2.807788] ata3.00: status: { DRDY } [ 2.807825] ata3: hard resetting link [ 3.124020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.738128] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.738622] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.739122] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.739622] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.740074] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.740223] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 3.740361] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 3.740505] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 3.746011] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3.746631] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 3.747245] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 3.747871] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 4.409528] ata3.00: configured for UDMA/100 [ 5.210306] ata3: EH complete [ 5.219510] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen [ 5.219554] ata3.00: irq_stat 0x08000002, interface fatal error [ 5.219593] ata3: SError: { Proto } [ 5.219628] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 5.219668] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 5.219668] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error) [ 5.219721] ata3.00: status: { DRDY } [ 5.219758] ata3: hard resetting link [ 5.536017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.821488] ata3.00: configured for UDMA/100 [ 7.622321] ata3: EH complete [ 7.633149] device-mapper: uevent: version 1.0.3 [ 7.633439] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 7.642671] PM: Starting manual resume from disk [ 7.642676] PM: Hibernation image partition 8:5 present [ 7.642677] PM: Looking for hibernation image. [ 7.642884] PM: Image not found (code -22) [ 7.642886] PM: Hibernation image not present or could not be loaded. [ 7.645995] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 7.646001] PM: Marking nosave pages: [mem 0xcff90000-0xffffffff] [ 7.646770] PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff] [ 7.646940] PM: Basic memory bitmaps created [ 7.663087] PM: Basic memory bitmaps freed [ 7.697662] kjournald starting. Commit interval 5 seconds [ 7.697684] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 10.022858] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 10.022865] ACPI: Power Button [PWRB] [ 10.023033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 10.023036] ACPI: Power Button [PWRF] [ 10.047068] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 10.047073] ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \SM00 1 (20120913/utaddress-251) [ 10.047078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.082548] wmi: Mapper loaded [ 10.176538] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.203287] microcode: AMD CPU family 0xf not supported [ 10.285064] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 10.285191] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 10.285254] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input4 [ 10.330930] EDAC MC: Ver: 3.0.0 [ 10.382928] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.393422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.576300] [drm] Initialized drm 1.1.0 20060810 [ 10.595449] MCE: In-kernel MCE decoding enabled. [ 10.637493] AMD64 EDAC driver v3.4.0 [ 10.637529] EDAC amd64: DRAM ECC disabled. [ 10.637532] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 10.637532] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 10.637532] (Note that use of the override may cause unknown side effects.) [ 10.821232] parport_pc 00:05: reported by Plug and Play ACPI [ 10.821281] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.916365] ata3.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen [ 10.916435] ata3.00: irq_stat 0x08000002, interface fatal error [ 10.916486] ata3: SError: { Proto } [ 10.916534] ata3.00: failed command: IDENTIFY PACKET DEVICE [ 10.916613] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 10.916613] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error) [ 10.916705] ata3.00: status: { DRDY } [ 10.916754] ata3: hard resetting link [ 10.961027] Bluetooth: Core ver 2.16 [ 10.961059] NET: Registered protocol family 31 [ 10.961061] Bluetooth: HCI device and connection manager initialized [ 10.961254] Bluetooth: HCI socket layer initialized [ 10.961257] Bluetooth: L2CAP socket layer initialized [ 10.961263] Bluetooth: SCO socket layer initialized [ 10.992337] usbcore: registered new interface driver btusb [ 11.210817] kvm: Nested Virtualization enabled [ 11.236020] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 11.243841] powernow-k8: fid 0x14 (2800 MHz), vid 0xa [ 11.243845] powernow-k8: fid 0x12 (2600 MHz), vid 0xc [ 11.243846] powernow-k8: fid 0x10 (2400 MHz), vid 0xe [ 11.243847] powernow-k8: fid 0xe (2200 MHz), vid 0x10 [ 11.243848] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 11.243850] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 11.243851] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 11.243883] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1660 (1 cpu cores) (version 2.20.00) [ 11.445895] MXM: GUID detected in BIOS [ 11.446145] nouveau 0000:02:00.0: setting latency timer to 64 [ 11.446602] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 11.447218] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa480a2 [ 11.447226] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA) [ 11.447231] nouveau [ DEVICE][0000:02:00.0] Family : NV50 [ 11.450154] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image... [ 11.498609] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid [ 11.498615] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN [ 11.499115] nouveau [ VBIOS][0000:02:00.0] BIT signature found [ 11.499123] nouveau [ VBIOS][0000:02:00.0] version 62.77.35.00 [ 11.530057] nouveau [ MXM][0000:02:00.0] no VBIOS data, nothing to do [ 11.560999] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory [ 11.561010] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB [ 12.208023] i2c i2c-2: sendbytes: error -110 [ 12.552480] ata3.00: configured for UDMA/100 [ 12.740023] i2c i2c-2: sendbytes: error -110 [ 13.324508] ata3: EH complete [ 13.940022] i2c i2c-2: sendbytes: error -110 [ 14.136014] i2c i2c-2: sendbytes: error -110 [ 14.137401] [TTM] Zone kernel: Available graphics memory: 1901408 kiB [ 14.137408] [TTM] Initializing pool allocator [ 14.137420] [TTM] Initializing DMA pool allocator [ 14.137807] nouveau [ DRM] VRAM: 256 MiB [ 14.137816] nouveau [ DRM] GART: 512 MiB [ 14.137829] nouveau [ DRM] BIT BIOS found [ 14.137836] nouveau [ DRM] Bios version 62.77.35.00 [ 14.137845] nouveau [ DRM] TMDS table version 2.0 [ 14.137851] nouveau [ DRM] DCB version 4.0 [ 14.137857] nouveau [ DRM] DCB outp 00: 01000300 0000001e [ 14.137863] nouveau [ DRM] DCB outp 01: 01011332 00020010 [ 14.137868] nouveau [ DRM] DCB conn 00: 00000000 [ 14.137874] nouveau [ DRM] DCB conn 01: 00003161 [ 14.151539] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.151546] [drm] No driver support for vblank timestamp query. [ 14.344144] nouveau [ DRM] 1 available performance level(s) [ 14.344159] nouveau [ DRM] 0: core 500MHz shader 1200MHz voltage 1100mV fanspeed 100% [ 14.344165] nouveau [ DRM] c: [ 14.387963] nouveau [ DRM] MM: using M2MF for buffer copies [ 14.419955] nouveau [ DRM] allocated 1024x768 fb: 0x50000, bo ffff88011a025800 [ 14.420199] fbcon: nouveaufb (fb0) is primary device [ 14.439651] Console: switching to colour frame buffer device 128x48 [ 14.440796] fb0: nouveaufb frame buffer device [ 14.440800] drm: registered panic notifier [ 14.444060] [drm] Initialized nouveau 1.1.0 20120801 for 0000:02:00.0 on minor 0 [ 14.444884] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 14.444895] hda_intel: Disabling MSI [ 14.444981] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 16.172470] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/sound/card0/input6 [ 16.172838] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input7 [ 16.173161] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input8 [ 16.173469] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9 [ 16.173786] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10 [ 16.174093] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input11 [ 16.174388] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input12 [ 16.174695] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13 [ 16.174998] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input14 [ 17.289608] Adding 5662876k swap on /dev/sda5. Priority:-1 extents:1 across:5662876k [ 17.891037] EXT3-fs (sda1): using internal journal [ 18.123745] fuse init (API version 7.20) [ 18.173682] loop: module loaded [ 18.259479] it87: Found IT8712F chip at 0x290, revision 8 [ 18.259496] it87: VID is disabled (pins used for GPIO) [ 18.259577] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.ECRE 1 (20120913/utaddress-251) [ 18.259591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.276609] kjournald starting. Commit interval 5 seconds [ 21.277109] EXT3-fs (sda7): using internal journal [ 21.277116] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 21.376033] kjournald starting. Commit interval 5 seconds [ 21.376537] EXT3-fs (sda6): using internal journal [ 21.376543] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 23.702780] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.970138] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 24.362264] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X [ 24.362342] forcedeth 0000:00:0a.0 eth0: MSI enabled [ 27.734155] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.092195] Loading iSCSI transport class v2.0-870. [ 30.121060] iscsi: registered transport (tcp) [ 30.238950] iscsi: registered transport (iser) [ 31.820186] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 33.235834] sit: IPv6 over IPv4 tunneling driver [ 33.278318] tun: Universal TUN/TAP device driver, 1.6 [ 33.278326] tun: (C) 1999-2004 Max Krasnyansky [ 38.256123] Bluetooth: RFCOMM TTY layer initialized [ 38.256166] Bluetooth: RFCOMM socket layer initialized [ 38.256170] Bluetooth: RFCOMM ver 1.11 [ 38.330314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 38.330323] Bluetooth: BNEP filters: protocol multicast [ 38.330348] Bluetooth: BNEP socket layer initialized [ 40.418155] lp0: using parport0 (interrupt-driven). [ 40.529256] ppdev: user-space parallel port driver [ 47.517752] Bridge firewalling registered [ 48.144822] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 50.290818] Ebtables v2.0 registered [ 85.609241] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 85.609274] Bluetooth: HIDP socket layer initialized [ 115.819460] BUG: unable to handle kernel paging request at fffffffffffffff8 [ 115.819521] IP: [] nouveau_mm_head+0x30/0x127 [nouveau] [ 115.819632] PGD 160d067 PUD 160e067 PMD 0 [ 115.819656] Oops: 0000 [#1] SMP [ 115.819676] Modules linked in: hidp ebtable_nat ebtables cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace ipt_MASQUERADE xt_CHECKSUM bridge stp llc ppdev lp bnep rfcomm tun sit tunnel4 binfmt_misc uinput ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip6table_raw ip6table_mangle ip6t_REJECT xt_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt ip6table_filter ip6_tables xt_tcpudp ipt_REJECT ipt_ULOG xt_limit xt_multiport xt_conntrack iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_raw ip_tables x_tables hwmon_vid loop fuse snd_hda_codec_hdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi nouveau snd_seq_midi_event snd_rawmidi powernow_k8 kvm_amd kvm snd_seq btusb bluetooth rfkill parport_pc parport ttm drm_kms_helper snd_seq_device snd_timer edac_mce_amd snd drm i2c _algo_bit shpchp pcspkr mxm_wmi edac_core video crc16 soundcore k8temp evdev processor asus_atk0110 wmi thermal_sys i2c_nforce2 i2c_core button ext3 mbcache jbd dm_mod sg hid_generic sr_mod sd_mod cdrom crc_t10dif usbhid usb_storage hid uas ahci libahci libata forcedeth ohci_hcd scsi_mod ehci_hcd floppy usbcore usb_common [ 115.820391] CPU 0 [ 115.820405] Pid: 2953, comm: Xorg Not tainted 3.7.0-rc3-ao2 #1 System manufacturer System Product Name/M3N78-VM [ 115.820434] RIP: 0010:[] [] nouveau_mm_head+0x30/0x127 [nouveau] [ 115.820494] RSP: 0018:ffff88011839d9a8 EFLAGS: 00010212 [ 115.820510] RAX: 00000000ffffffff RBX: fffffffffffffff0 RCX: 000000000000000c [ 115.820531] RDX: 000000000000000c RSI: 0000000000000001 RDI: ffff8801182f60e8 [ 115.820551] RBP: ffff8800cfa16f78 R08: 0000000000000000 R09: ffff8800cfa16f78 [ 115.820572] R10: ffff8801182f6000 R11: ffff8800cfa16ec0 R12: 000000000000000c [ 115.820592] R13: ffff8801182f6001 R14: ffff8801182f6020 R15: ffff88011839da70 [ 115.820614] FS: 00007f93e340d880(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 115.820635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 115.820652] CR2: fffffffffffffff8 CR3: 000000011874f000 CR4: 00000000000007f0 [ 115.820673] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 115.820693] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 115.820712] Process Xorg (pid: 2953, threadinfo ffff88011839c000, task ffff880117e2a040) [ 115.820732] Stack: [ 115.820740] 0000000000000246 ffffffff810fa13d ffffffff81060f13 0000000000000060 [ 115.820774] 0000000000000002 0000000000000010 ffff8801182f6000 ffff8801182f6020 [ 115.820805] ffff88011839da70 ffffffffa034210a 0000000000000000 00000060810c7d9e [ 115.820835] Call Trace: [ 115.820857] [] ? kmem_cache_alloc_trace+0xbf/0xcf [ 115.820883] [] ? should_resched+0x5/0x23 [ 115.820941] [] ? nv50_fb_vram_new+0xc5/0x1f2 [nouveau] [ 115.821009] [] ? nouveau_vram_manager_new+0x62/0xa4 [nouveau] [ 115.821051] [] ? ttm_bo_mem_space+0x112/0x2f8 [ttm] [ 115.821083] [] ? ttm_bo_move_buffer+0xa3/0xee [ttm] [ 115.821105] [] ? kmem_cache_alloc_trace+0xbf/0xcf [ 115.821136] [] ? ttm_bo_validate+0xa6/0xeb [ttm] [ 115.821166] [] ? ttm_bo_init+0x373/0x3b2 [ttm] [ 115.821232] [] ? nouveau_bo_new+0x23f/0x264 [nouveau] [ 115.821292] [] ? nouveau_ttm_tt_unpopulate+0xa3/0xa3 [nouveau] [ 115.821292] [] ? nouveau_gem_new+0x53/0xf7 [nouveau] [ 115.821292] [] ? should_resched+0x5/0x23 [ 115.821292] [] ? _cond_resched+0x6/0x1b [ 115.821292] [] ? nouveau_gem_ioctl_new+0x9f/0x107 [nouveau] [ 115.821292] [] ? drm_gem_flink_ioctl+0xc1/0xde [drm] [ 115.821292] [] ? drm_ioctl+0x28c/0x36a [drm] [ 115.821292] [] ? handle_pte_fault+0x6ff/0x770 [ 115.821292] [] ? nouveau_gem_new+0xf7/0xf7 [nouveau] [ 115.821292] [] ? __do_page_fault+0x2d8/0x376 [ 115.821292] [] ? vfs_ioctl+0x1e/0x31 [ 115.821292] [] ? do_vfs_ioctl+0x3ee/0x430 [ 115.821292] [] ? vfs_read+0xac/0xf5 [ 115.821292] [] ? sys_ioctl+0x4d/0x7c [ 115.821292] [] ? system_call_fastpath+0x16/0x1b [ 115.821292] Code: 44 89 c0 41 56 f7 d0 41 55 41 88 f5 41 54 41 89 d4 55 4c 89 cd 53 48 83 ec 18 48 8b 5f 10 89 44 24 0c 48 83 eb 10 e9 da 00 00 00 <48> 8b 43 08 44 8b 53 34 44 8b 7b 38 48 39 f8 45 89 d3 47 8d 0c [ 115.821292] RIP [] nouveau_mm_head+0x30/0x127 [nouveau] [ 115.821292] RSP [ 115.821292] CR2: fffffffffffffff8 [ 115.821292] ---[ end trace cc9ee83770ef32d5 ]--- [ 117.838087] nouveau E[ DRM] EvoCh 1 Mthd 0x0080 Data 0x00000000 (0x000b 0x05) [ 117.840022] [sched_delayed] sched: RT throttling activated -- Antonio Ospite http://ao2.it A: Because it messes up the order in which people normally read text. See http://en.wikipedia.org/wiki/Posting_style Q: Why is top-posting such a bad thing? -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/