From: "Henrik Rydberg" <rydberg@euromail.se>
Date: Wed, 31 Oct 2012 20:16:30 +0100
To: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Jiri Kosina <jkosina@suse.cz>,
        Stephane Chatty <chatty@enac.fr>, linux-input@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 10/11] HID: introduce Scan Time
Message-ID: <20121031191630.GA1752@polaris.bitmath.org>
References: <1351241067-9521-1-git-send-email-benjamin.tissoires@gmail.com>
 <1351241067-9521-11-git-send-email-benjamin.tissoires@gmail.com>
 <20121029224331.GA15608@polaris.bitmath.org>
 <CAN+gG=G8F3m+UUDxm0qioipyMaAFHuQzKhmqn+-2qpGUGWwk6Q@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAN+gG=G8F3m+UUDxm0qioipyMaAFHuQzKhmqn+-2qpGUGWwk6Q@mail.gmail.com>
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4274
Lines: 101

Hi Benjamin,

> > This is a nice feature, useful in many other contexts. As such, I
> > think it should be defined in the context of the input subsystem, with
> > a more specific definition added to the documentation. For instance,
> > is 100us suitable? When should it start at zero, at BTN_TOUCH? Or
> > should it perhaps wrap around on unsigned integer instead? Or display
> > the difference from the last event?
> 
> Well, the thing is that I didn't wanted to copy/paste win 8 definition
> for ScanTime. So I put it with my words and not in a very
> understandable way :)
> This allows me to forward the incoming events without having to do
> anything on them...
> 
> - 100us: suitable, not sure, but it would be good to define a standard
> unit for time too

Units of 100us might be fine, but maybe 64 or 128 or even 1 might be
better suited for implementations.

> - start at zero at BTN_TOUCH: no. This information allows us to do
> much better false release detection. If we reset this counter, then we
> will loose the time between the two touch/release.

Good point.

> The spec says that
> it is up to the device to reset it after a period of time (not
> defined, but can be one second for instance). Last, BTN_TOUCH is not
> reliable for hovering devices because we will still get finger
> information without BTN_TOUCH.

Agreed.

> - difference from the last event: not sure how it is implemented in
> windows, but I'm not sure it's a good way of doing if the gesture
> engine needs the time from the beginning of the touch...

Probably more complicated than it needs to be, yes.

> Anyway, I would be happy to have other comments/proposals for this event code.

Here is my proposal: Let ABS_SCAN_TIME be the number of microseconds
since the last reset. Let it be coded as an uint32 value, which is
allowed to wrap around with no special consequence. It is assumed that
the time difference between two consecutive events is reliable on a
reasonable time scale (hours).  A reset to zero can happen, in which
case the time since the last event is unknown. A definition like
time_valid = (time || (time - prev_time) < MAX_SCAN_INTERVAL) ought to
work for most cases.

> >> diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
> >> index 53305bd..8f8c908 100644
> >> --- a/Documentation/input/event-codes.txt
> >> +++ b/Documentation/input/event-codes.txt
> >> @@ -174,6 +174,13 @@ A few EV_ABS codes have special meanings:
> >>      the input device may be used freely in three dimensions, consider ABS_Z
> >>      instead.
> >>
> >> +* ABS_SCAN_TIME:
> >> +  - Used when the device provides a timestamp for each frame. The unit must be
> >> +    100us, and may be reset when the device don't send any events for a
> >> +    period of time. The values increment at each frame and thus, it can roll
> >> +    back to 0 when reach logical_max. If the device does not provide this
> >> +    information, the driver must not provide it to the user space.
> >> +
> >>  * ABS_MT_<name>:
> >>    - Used to describe multitouch input events. Please see
> >>      multi-touch-protocol.txt for details.
> >> diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
> >> index 16cc89a..5fe7bd3 100644
> >> --- a/drivers/hid/hid-input.c
> >> +++ b/drivers/hid/hid-input.c
> >> @@ -675,6 +675,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
> >>                       map_key_clear(BTN_STYLUS2);
> >>                       break;
> >>
> >> +             case 0x56: /* Scan Time */
> >> +                     map_abs(ABS_SCAN_TIME);
> >> +                     break;
> >> +
> >
> > Is it not enough to map it in the case below? Or you mean this is
> > picked up by hid core?
> >
> 
> in hidinput_configure_usage, it's enough to just map it.
> 
> In hid-multitouch, We also just need to map it, and it will be handled
> by hid-core in the .event callback.

I think you should intercept it, convert it, and send it out with the touch frame.

Thanks,
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/