The 'load_new_rom_data' was used for checking whether new ROM data
should be updated or not.
However, we can decide it with 'size_program' data.
If the size is greater than 0, it means updating ROM area is required.
Otherwise, the default ROM data will be used.
Therefore, this duplicate platform data can be removed.
Signed-off-by: Milo(Woogyom) Kim <[email protected]>
---
Documentation/backlight/lp855x-driver.txt | 4 ----
drivers/video/backlight/lp855x_bl.c | 2 +-
include/linux/platform_data/lp855x.h | 4 ----
3 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
index 72e2a67..1c732f0 100644
--- a/Documentation/backlight/lp855x-driver.txt
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -36,9 +36,6 @@ For supporting platform specific data, the lp855x platform data can be used.
* initial_brightness : Initial value of backlight brightness.
* period_ns : Platform specific PWM period value. unit is nano.
Only valid when brightness is pwm input mode.
-* load_new_rom_data :
- 0 : use default configuration data
- 1 : update values of eeprom or eprom registers on loading driver
* size_program : Total size of lp855x_rom_data.
* rom_data : List of new eeprom/eprom registers.
@@ -55,7 +52,6 @@ static struct lp855x_platform_data lp8552_pdata = {
.name = "lcd-bl",
.device_control = I2C_CONFIG(LP8552),
.initial_brightness = INITIAL_BRT,
- .load_new_rom_data = 1,
.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
.rom_data = lp8552_eeprom_arr,
};
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index b94dc00..f558f8f 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -192,7 +192,7 @@ static int lp855x_configure(struct lp855x *lp)
if (ret)
goto err;
- if (pd->load_new_rom_data && pd->size_program) {
+ if (pd->size_program > 0) {
for (i = 0; i < pd->size_program; i++) {
addr = pd->rom_data[i].addr;
val = pd->rom_data[i].val;
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index a4ed0bd..ea32005 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -115,9 +115,6 @@ struct lp855x_rom_data {
* @initial_brightness : initial value of backlight brightness
* @period_ns : platform specific pwm period value. unit is nano.
Only valid when mode is PWM_BASED.
- * @load_new_rom_data :
- 0 : use default configuration data
- 1 : update values of eeprom or eprom registers on loading driver
* @size_program : total size of lp855x_rom_data
* @rom_data : list of new eeprom/eprom registers
*/
@@ -126,7 +123,6 @@ struct lp855x_platform_data {
u8 device_control;
u8 initial_brightness;
unsigned int period_ns;
- u8 load_new_rom_data;
int size_program;
struct lp855x_rom_data *rom_data;
};
--
1.7.9.5
Best Regards,
Milo