2013-04-30 17:29:52

by Julien Grall

[permalink] [raw]
Subject: [PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
irq_startup, that is responsible for calling irq_unmask at startup time.
As a result event channels remain masked.

The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.

On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
doesn't impact this architecture.

Signed-off-by: Julien Grall <[email protected]>
---
Changes since v1:
- Specify this commit will not impact x86 in the comment
- Clear flag directly in xen_irq_info_common_init, this function is
called by all bind_*_to_irq

drivers/xen/events.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index d8cc812..6a6bbe4 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
info->cpu = cpu;

evtchn_to_irq[evtchn] = irq;
+
+ irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
}

static void xen_irq_info_evtchn_init(unsigned irq,
@@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
struct irq_info *info = info_for_irq(irq);
WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
- irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);

out:
mutex_unlock(&irq_mapping_update_lock);
--
1.7.10.4


2013-04-30 17:35:01

by Stefano Stabellini

[permalink] [raw]
Subject: Re: [PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

Konrad, are you going to take care of this patch (assuming that you are
OK with it)?

On Tue, 30 Apr 2013, Julien Grall wrote:
> Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
> default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
> irq_startup, that is responsible for calling irq_unmask at startup time.
> As a result event channels remain masked.
>
> The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
> missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.
>
> On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
> doesn't impact this architecture.
>
> Signed-off-by: Julien Grall <[email protected]>

Acked-by: Stefano Stabellini <[email protected]>


> Changes since v1:
> - Specify this commit will not impact x86 in the comment
> - Clear flag directly in xen_irq_info_common_init, this function is
> called by all bind_*_to_irq
>
> drivers/xen/events.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/xen/events.c b/drivers/xen/events.c
> index d8cc812..6a6bbe4 100644
> --- a/drivers/xen/events.c
> +++ b/drivers/xen/events.c
> @@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
> info->cpu = cpu;
>
> evtchn_to_irq[evtchn] = irq;
> +
> + irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
> }
>
> static void xen_irq_info_evtchn_init(unsigned irq,
> @@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
> struct irq_info *info = info_for_irq(irq);
> WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
> }
> - irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
>
> out:
> mutex_unlock(&irq_mapping_update_lock);
> --
> 1.7.10.4
>

2013-04-30 19:09:04

by Konrad Rzeszutek Wilk

[permalink] [raw]
Subject: Re: [PATCH V2] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST

On Tue, Apr 30, 2013 at 06:34:52PM +0100, Stefano Stabellini wrote:
> Konrad, are you going to take care of this patch (assuming that you are
> OK with it)?

Yes. Will push it around rc1.

>
> On Tue, 30 Apr 2013, Julien Grall wrote:
> > Reset the IRQ_NOAUTOEN and IRQ_NOREQUEST flags that are enabled by
> > default on ARM. If IRQ_NOAUTOEN is set, __setup_irq doesn't call
> > irq_startup, that is responsible for calling irq_unmask at startup time.
> > As a result event channels remain masked.
> >
> > The clear is already made in bind_evtchn_to_irq with commit a8636c0 but was
> > missing on all others bind_*_to_irq. Move the clear in xen_irq_info_common_init.
> >
> > On x86, IRQ_NOAUTOEN and IRQ_NOREQUEST are cleared by default, so this commit
> > doesn't impact this architecture.
> >
> > Signed-off-by: Julien Grall <[email protected]>
>
> Acked-by: Stefano Stabellini <[email protected]>
>
>
> > Changes since v1:
> > - Specify this commit will not impact x86 in the comment
> > - Clear flag directly in xen_irq_info_common_init, this function is
> > called by all bind_*_to_irq
> >
> > drivers/xen/events.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/xen/events.c b/drivers/xen/events.c
> > index d8cc812..6a6bbe4 100644
> > --- a/drivers/xen/events.c
> > +++ b/drivers/xen/events.c
> > @@ -167,6 +167,8 @@ static void xen_irq_info_common_init(struct irq_info *info,
> > info->cpu = cpu;
> >
> > evtchn_to_irq[evtchn] = irq;
> > +
> > + irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
> > }
> >
> > static void xen_irq_info_evtchn_init(unsigned irq,
> > @@ -874,7 +876,6 @@ int bind_evtchn_to_irq(unsigned int evtchn)
> > struct irq_info *info = info_for_irq(irq);
> > WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
> > }
> > - irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN);
> >
> > out:
> > mutex_unlock(&irq_mapping_update_lock);
> > --
> > 1.7.10.4
> >