Hallo l-k,
I've had problem while burn CD. Then:
rmmod sg
rmmod sr_mod
rmmod ide-scsi
modprobe ide-scsi
and while I try command 'modprobe sg', I've got this oops:
ksymoops 2.4.6 on i686 2.5.38. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.5.38/ (default)
-m /boot/System.map-2.5.38 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Unable to handle kernel NULL pointer dereference at virtual address 00000000
c01af30c
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0060:[<c01af30c>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: 00000000 ecx: cb29d49c edx: 00000000
esi: 00000000 edi: c35e2000 ebp: c35e2000 esp: c35e3ec8
ds: 0068 es: 0068 ss: 0068
Stack: cfeaf138 00000000 d0905434 00000000 00000000 d09123bc d090543c d09123a8
d090b000 c01ae6ee d0905420 d09123a8 c01ae670 c01af8da d09123a8 00000000
00000001 00000001 d090dd61 d09123a8 ffffffea c0120cdf d090b060 08089240
Call Trace: [<d0905434>] [<d09123bc>] [<d090543c>] [<d09123a8>] [<c01ae6ee>]
[<d0905420>] [<d09123a8>] [<c01ae670>] [<c01af8da>] [<d09123a8>] [<d090dd61>]
[<d09123a8>] [<c0120cdf>] [<d090b060>] [<d0912320>] [<d090b060>] [<c0107a7b>]
Code: 8b 03 0f 18 00 3b 5c 24 08 75 89 c6 05 d0 68 31 c0 01 b8 00
>>EIP; c01af30c <bus_for_each_dev+cc/140> <=====
>>ecx; cb29d49c <_end+ae965a0/104d2164>
>>edi; c35e2000 <_end+31db104/104d2164>
>>ebp; c35e2000 <_end+31db104/104d2164>
>>esp; c35e3ec8 <_end+31dcfcc/104d2164>
Trace; d0905434 <[ide-scsi].bss.end+1245/1e71>
Trace; d09123bc <.bss.end+4e51/????>
Trace; d090543c <[ide-scsi].bss.end+124d/1e71>
Trace; d09123a8 <.bss.end+4e3d/????>
Trace; c01ae6ee <driver_attach+1e/30>
Trace; d0905420 <[ide-scsi].bss.end+1231/1e71>
Trace; d09123a8 <.bss.end+4e3d/????>
Trace; c01ae670 <do_driver_attach+0/60>
Trace; c01af8da <driver_register+9a/d0>
Trace; d09123a8 <.bss.end+4e3d/????>
Trace; d090dd61 <.bss.end+7f6/????>
Trace; d09123a8 <.bss.end+4e3d/????>
Trace; c0120cdf <sys_init_module+4ef/640>
Trace; d090b060 <[sg]sg_proc_debug_read+70/90>
Trace; d0912320 <.bss.end+4db5/????>
Trace; d090b060 <[sg]sg_proc_debug_read+70/90>
Trace; c0107a7b <syscall_call+7/b>
Code; c01af30c <bus_for_each_dev+cc/140>
00000000 <_EIP>:
Code; c01af30c <bus_for_each_dev+cc/140> <=====
0: 8b 03 mov (%ebx),%eax <=====
Code; c01af30e <bus_for_each_dev+ce/140>
2: 0f 18 00 prefetchnta (%eax)
Code; c01af311 <bus_for_each_dev+d1/140>
5: 3b 5c 24 08 cmp 0x8(%esp,1),%ebx
Code; c01af315 <bus_for_each_dev+d5/140>
9: 75 89 jne ffffff94 <_EIP+0xffffff94> c01af2a0 <bus_for_each_dev+60/140>
Code; c01af317 <bus_for_each_dev+d7/140>
b: c6 05 d0 68 31 c0 01 movb $0x1,0xc03168d0
Code; c01af31e <bus_for_each_dev+de/140>
12: b8 00 00 00 00 mov $0x0,%eax
1 warning issued. Results may not be reliable.
The second problem I have with memory: kernel consuming memory w/o
released it, I think. When I boot computer, my /proc/meminfo is this:
MemTotal: 255328 kB
MemFree: 102100 kB
MemShared: 0 kB
Buffers: 8164 kB
Cached: 28664 kB
SwapCached: 0 kB
Active: 15608 kB
Inactive: 60792 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 255328 kB
LowFree: 102100 kB
SwapTotal: 498952 kB
SwapFree: 498952 kB
Dirty: 104 kB
Writeback: 580 kB
Mapped: 46396 kB
Slab: 12832 kB
Committed_AS: 96956 kB
PageTables: 528 kB
ReverseMaps: 18060
HugePages: 15
Available: 15
Size: 4096 kB
But before I rebooted, I had about 64MB on the swap with the same
running programs??? I'm sorry, I have not /proc/meminfo before my reboot
:-(.
Sincerely
Jan Marek
--
Ing. Jan Marek
University of South Bohemia
Academic Computer Centre
Phone: +420-38-7772080