Previously, many years ago, this was done in series which was fine,
but things moved to be done in parallel and with many disks in a system
it can be hard to see which disk spun up and which one didn't as the
printk messages were all mixed together.
Signed-off-by: Stewart Smith <[email protected]>
---
drivers/scsi/sd.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 470954a..1436c85 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1838,7 +1838,6 @@ sd_spinup_disk(struct scsi_disk *sdkp)
}
/* Wait 1 second for next try */
msleep(1000);
- printk(".");
/*
* Wait for USB flash devices with slow firmware.
@@ -1868,9 +1867,9 @@ sd_spinup_disk(struct scsi_disk *sdkp)
if (spintime) {
if (scsi_status_is_good(the_result))
- printk("ready\n");
+ sd_printk(KERN_NOTICE, sdkp, "ready\n");
else
- printk("not responding...\n");
+ sd_printk(KERN_NOTICE, sdkp, "not responding...\n");
}
}
--
1.8.5.3