In the legacy case, led_dat->gpiod is initialized correctly, but
overwritten later by template->gpiod, which is NULL, causing leds-gpio
to fail with:
gpiod_direction_output: invalid GPIO
leds-gpio: probe of leds-gpio failed with error -22
Move the initialization of led_dat->gpiod from template->gpiod up, and
always use led_dat->gpiod later, to fix this.
Fixes: 5c51277a9ababfa4 ("leds: leds-gpio: Add support for GPIO descriptors")
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
drivers/leds/leds-gpio.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index ba4698c32bb04bde..b3c5d9d6a42bcd8b 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -92,7 +92,8 @@ static int create_gpio_led(const struct gpio_led *template,
{
int ret, state;
- if (!template->gpiod) {
+ led_dat->gpiod = template->gpiod;
+ if (!led_dat->gpiod) {
/*
* This is the legacy code path for platform code that
* still uses GPIO numbers. Ultimately we would like to get
@@ -122,8 +123,7 @@ static int create_gpio_led(const struct gpio_led *template,
led_dat->cdev.name = template->name;
led_dat->cdev.default_trigger = template->default_trigger;
- led_dat->gpiod = template->gpiod;
- led_dat->can_sleep = gpiod_cansleep(template->gpiod);
+ led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
led_dat->blinking = 0;
if (blink_set) {
led_dat->platform_gpio_blink_set = blink_set;
--
1.9.1
On Thu, Nov 06, 2014 at 12:23:23PM +0100, Geert Uytterhoeven wrote:
> In the legacy case, led_dat->gpiod is initialized correctly, but
> overwritten later by template->gpiod, which is NULL, causing leds-gpio
> to fail with:
>
> gpiod_direction_output: invalid GPIO
> leds-gpio: probe of leds-gpio failed with error -22
>
> Move the initialization of led_dat->gpiod from template->gpiod up, and
> always use led_dat->gpiod later, to fix this.
>
> Fixes: 5c51277a9ababfa4 ("leds: leds-gpio: Add support for GPIO descriptors")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
On 11/6/2014 12:23 PM, Geert Uytterhoeven wrote:
> In the legacy case, led_dat->gpiod is initialized correctly, but
> overwritten later by template->gpiod, which is NULL, causing leds-gpio
> to fail with:
>
> gpiod_direction_output: invalid GPIO
> leds-gpio: probe of leds-gpio failed with error -22
>
> Move the initialization of led_dat->gpiod from template->gpiod up, and
> always use led_dat->gpiod later, to fix this.
>
> Fixes: 5c51277a9ababfa4 ("leds: leds-gpio: Add support for GPIO descriptors")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Since it fixes a bug in a patch going from my tree, the fix needs to go
into my tree as well.
Thus I'm going to take into my device-properties branch.
Bryan, please let me know if there are any problems with that.
Rafael
> ---
> drivers/leds/leds-gpio.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
> index ba4698c32bb04bde..b3c5d9d6a42bcd8b 100644
> --- a/drivers/leds/leds-gpio.c
> +++ b/drivers/leds/leds-gpio.c
> @@ -92,7 +92,8 @@ static int create_gpio_led(const struct gpio_led *template,
> {
> int ret, state;
>
> - if (!template->gpiod) {
> + led_dat->gpiod = template->gpiod;
> + if (!led_dat->gpiod) {
> /*
> * This is the legacy code path for platform code that
> * still uses GPIO numbers. Ultimately we would like to get
> @@ -122,8 +123,7 @@ static int create_gpio_led(const struct gpio_led *template,
>
> led_dat->cdev.name = template->name;
> led_dat->cdev.default_trigger = template->default_trigger;
> - led_dat->gpiod = template->gpiod;
> - led_dat->can_sleep = gpiod_cansleep(template->gpiod);
> + led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
> led_dat->blinking = 0;
> if (blink_set) {
> led_dat->platform_gpio_blink_set = blink_set;