2001-02-12 14:55:31

by D. Sen

[permalink] [raw]
Subject: Hard drive messages on syslog

Any idea whats causing this?

kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
kernel: hda: no DRQ after issuing WRITE
kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
kernel: hda: no DRQ after issuing WRITE
kernel: hda: lost interrupt
kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
kernel: hda: no DRQ after issuing WRITE
kernel: hda: status error: status=0x50 { DriveReady SeekComplete }
kernel: hda: no DRQ after issuing WRITE
kernel: hda: DMA disabled
kernel: ide0: reset: success

also:
kernel: hda: timeout waiting for DMA
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: timeout waiting for DMA
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: lost interrupt
kernel: hda: timeout waiting for DMA
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: timeout waiting for DMA
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: DMA disabled
kernel: ide0: reset: success

and,

kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: timeout waiting for DMA
kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: lost interrupt
kernel: hda: timeout waiting for DMA
kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: timeout waiting for DMA
kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
kernel: hda: irq timeout: status=0x50 { DriveReady SeekComplete }
kernel: hda: DMA disabled
kernel: ide0: reset: success


Its a 32 G drive on a TP 21. I see the messages on kernels 2.2.17,
2.2.18 and 2.4.1. More info from the syslog:

Feb 12 08:36:12 localhost kernel: block: queued sectors max/low
169677kB/56559kB, 512 slots per queue
Feb 12 08:36:12 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 6.31
Feb 12 08:36:12 localhost kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Feb 12 08:36:12 localhost kernel: PIIX4: IDE controller on PCI bus 00
dev 39
Feb 12 08:36:12 localhost kernel: PIIX4: chipset revision 1
Feb 12 08:36:12 localhost kernel: PIIX4: not 100%% native mode: will
probe irqs later
Feb 12 08:36:12 localhost kernel: ide0: BM-DMA at 0x1c10-0x1c17,
BIOS settings: hda:DMA, hdb:pio
Feb 12 08:36:12 localhost kernel: ide1: BM-DMA at 0x1c18-0x1c1f,
BIOS settings: hdc:DMA, hdd:pio
Feb 12 08:36:12 localhost kernel: hda: IBM-DJSA-232, ATA DISK drive
Feb 12 08:36:12 localhost kernel: hdc: MATSHITADVD-ROM SR-8175, ATAPI
CD/DVD-ROM drive
Feb 12 08:36:12 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 12 08:36:12 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 12 08:36:12 localhost kernel: hda: 62506080 sectors (32003 MB)
w/1874KiB Cache, CHS=4134/240/63, UDMA(33)
Feb 12 08:36:12 localhost kernel: Partition check:
Feb 12 08:36:12 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6
hda7 hda8 >


(Please cc the responses to me as I am not subscribed to the list)