When working with LVD SCSI bus, I have found it to be rather useful
to know if the bus is operating in LVD or SE mode since the bus auto
switches. All the info needed to print the bus mode is already there
in sym53c8xx driver. This patch simply adds appropriate printk to do
that.
--- sym53c8xx.c.bak Tue Feb 27 11:05:43 2001
+++ sym53c8xx.c Tue Feb 27 11:09:13 2001
@@ -5473,6 +5473,23 @@
if (np->scsi_mode == SMODE_HVD)
np->rv_stest2 |= 0x20;
+ switch (np->scsi_mode) {
+ case SMODE_SE:
+ printk(KERN_INFO "%s: Bus mode: Single-Ended\n",
+ ncr_name(np));
+ break;
+
+ case SMODE_LVD:
+ printk(KERN_INFO "%s: Bus mode: LVD\n",
+ ncr_name(np));
+ break;
+
+ case SMODE_HVD:
+ printk(KERN_INFO "%s: Bus mode: High Voltage Differential\n",
+ ncr_name(np));
+ break;
+ }
+
/*
** Set LED support from SCRIPTS.
** Ignore this feature for boards known to use a
====================================================================
Khalid Aziz Linux Development Laboratory
(970)898-9214 Hewlett-Packard
[email protected] Fort Collins, CO