Stoney SoC provides oscout clock. This clock can support 25Mhz and
48Mhz of frequency.
The clock is available for general system use.
Signed-off-by: Akshu Agrawal <[email protected]>
---
drivers/clk/x86/Makefile | 1 +
drivers/clk/x86/clk-st.c | 80 ++++++++++++++++++++++++++++++++++++
include/linux/platform_data/clk-st.h | 32 +++++++++++++++
3 files changed, 113 insertions(+)
create mode 100644 drivers/clk/x86/clk-st.c
create mode 100644 include/linux/platform_data/clk-st.h
diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
index 1367afb..f7ebae1 100644
--- a/drivers/clk/x86/Makefile
+++ b/drivers/clk/x86/Makefile
@@ -1,3 +1,4 @@
clk-x86-lpss-objs := clk-lpt.o
obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
+obj-$(CONFIG_X86) += clk-st.o
diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
new file mode 100644
index 0000000..6ac0dc5
--- /dev/null
+++ b/drivers/clk/x86/clk-st.c
@@ -0,0 +1,80 @@
+/*
+ * clock framework for AMD Stoney based clocks
+ *
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_data/clk-st.h>
+#include <linux/platform_device.h>
+
+/* Clock Driving Strength 2 register */
+#define CLKDRVSTR2 0x28
+/* Clock Control 1 register */
+#define MISCCLKCNTL1 0x40
+/* Auxiliary clock1 enable bit */
+#define OSCCLKENB 2
+/* 25Mhz auxiliary output clock freq bit */
+#define OSCOUT1CLK25MHZ 16
+
+static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
+
+static int st_clk_probe(struct platform_device *pdev)
+{
+ struct st_clk_data *st_data;
+ struct clk *clk_48m;
+ struct clk *clk_25m;
+ struct clk *clk_oscout1_mux;
+ struct clk *clk_oscout1;
+
+ st_data = dev_get_platdata(&pdev->dev);
+ if (!st_data || !st_data->base)
+ return -EINVAL;
+
+ clk_48m = clk_register_fixed_rate(NULL, "clk48MHz", NULL, 0,
+ 48000000);
+ clk_25m = clk_register_fixed_rate(NULL, "clk25MHz", NULL, 0,
+ 25000000);
+
+ clk_oscout1_mux = clk_register_mux(NULL, "oscout1_mux",
+ clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
+ 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
+
+ clk_set_parent(clk_oscout1_mux, clk_25m);
+
+ clk_oscout1 = clk_register_gate(NULL, "oscout1", "oscout1_mux",
+ 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+
+ clk_register_clkdev(clk_oscout1, "oscout1", NULL);
+
+ return 0;
+}
+
+static struct platform_driver st_clk_driver = {
+ .driver = {
+ .name = "clk-st",
+ },
+ .probe = st_clk_probe,
+};
+builtin_platform_driver(st_clk_driver);
diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h
new file mode 100644
index 0000000..5ede980
--- /dev/null
+++ b/include/linux/platform_data/clk-st.h
@@ -0,0 +1,32 @@
+/*
+ * clock framework for AMD Stoney based clock
+ *
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __CLK_ST_H
+#define __CLK_ST_H
+
+struct st_clk_data {
+ void __iomem *base;
+};
+
+#endif /* __CLK_ST_H */
--
1.9.1
Quoting Akshu Agrawal (2018-04-30 00:06:53)
> diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
> index 1367afb..f7ebae1 100644
> --- a/drivers/clk/x86/Makefile
> +++ b/drivers/clk/x86/Makefile
> @@ -1,3 +1,4 @@
> clk-x86-lpss-objs := clk-lpt.o
> obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
> obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
> +obj-$(CONFIG_X86) += clk-st.o
No desire to make a Kconfig for this driver so it isn't included all the
time on x86 devices that don't have this hardware?
> diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
> new file mode 100644
> index 0000000..6ac0dc5
> --- /dev/null
> +++ b/drivers/clk/x86/clk-st.c
> @@ -0,0 +1,80 @@
> +/*
> + * clock framework for AMD Stoney based clocks
> + *
> + * Copyright 2018 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
Can you use the SPDX tags here?
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/platform_data/clk-st.h>
> +#include <linux/platform_device.h>
> +
> +/* Clock Driving Strength 2 register */
> +#define CLKDRVSTR2 0x28
> +/* Clock Control 1 register */
> +#define MISCCLKCNTL1 0x40
> +/* Auxiliary clock1 enable bit */
> +#define OSCCLKENB 2
> +/* 25Mhz auxiliary output clock freq bit */
> +#define OSCOUT1CLK25MHZ 16
> +
> +static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
> +
> +static int st_clk_probe(struct platform_device *pdev)
> +{
> + struct st_clk_data *st_data;
> + struct clk *clk_48m;
> + struct clk *clk_25m;
> + struct clk *clk_oscout1_mux;
> + struct clk *clk_oscout1;
> +
> + st_data = dev_get_platdata(&pdev->dev);
> + if (!st_data || !st_data->base)
> + return -EINVAL;
> +
> + clk_48m = clk_register_fixed_rate(NULL, "clk48MHz", NULL, 0,
> + 48000000);
> + clk_25m = clk_register_fixed_rate(NULL, "clk25MHz", NULL, 0,
> + 25000000);
> +
> + clk_oscout1_mux = clk_register_mux(NULL, "oscout1_mux",
> + clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
> + 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
> +
> + clk_set_parent(clk_oscout1_mux, clk_25m);
> +
> + clk_oscout1 = clk_register_gate(NULL, "oscout1", "oscout1_mux",
> + 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
> + CLK_GATE_SET_TO_DISABLE, NULL);
> +
> + clk_register_clkdev(clk_oscout1, "oscout1", NULL);
Can you use the clk_hw registration and clkdev APIs? It would mean that
clk_set_parent() call up above would still be needed but I guess that's
OK. We don't currently have a way for non-DT based drivers to configure
the parents of a clk when it's registered.
> +
> + return 0;
> +}
> +
> diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h
> new file mode 100644
> index 0000000..5ede980
> --- /dev/null
> +++ b/include/linux/platform_data/clk-st.h
> @@ -0,0 +1,32 @@
> +/*
> + * clock framework for AMD Stoney based clock
> + *
> + * Copyright 2018 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef __CLK_ST_H
> +#define __CLK_ST_H
> +
> +struct st_clk_data {
> + void __iomem *base;
Can you include compiler.h in this file for the __iomem usage?
On 5/2/2018 3:28 AM, Stephen Boyd wrote:
> Quoting Akshu Agrawal (2018-04-30 00:06:53)
>> diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
>> index 1367afb..f7ebae1 100644
>> --- a/drivers/clk/x86/Makefile
>> +++ b/drivers/clk/x86/Makefile
>> @@ -1,3 +1,4 @@
>> clk-x86-lpss-objs := clk-lpt.o
>> obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
>> obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
>> +obj-$(CONFIG_X86) += clk-st.o
>
> No desire to make a Kconfig for this driver so it isn't included all the
> time on x86 devices that don't have this hardware?
>
Accepted, will use AMD specific config.
>> diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
>> new file mode 100644
>> index 0000000..6ac0dc5
>> --- /dev/null
>> +++ b/drivers/clk/x86/clk-st.c
>> @@ -0,0 +1,80 @@
>> +/*
>> + * clock framework for AMD Stoney based clocks
>> + *
>> + * Copyright 2018 Advanced Micro Devices, Inc.
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>
> Can you use the SPDX tags here?
>
Accepted. Will add in v2.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/platform_data/clk-st.h>
>> +#include <linux/platform_device.h>
>> +
>> +/* Clock Driving Strength 2 register */
>> +#define CLKDRVSTR2 0x28
>> +/* Clock Control 1 register */
>> +#define MISCCLKCNTL1 0x40
>> +/* Auxiliary clock1 enable bit */
>> +#define OSCCLKENB 2
>> +/* 25Mhz auxiliary output clock freq bit */
>> +#define OSCOUT1CLK25MHZ 16
>> +
>> +static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
>> +
>> +static int st_clk_probe(struct platform_device *pdev)
>> +{
>> + struct st_clk_data *st_data;
>> + struct clk *clk_48m;
>> + struct clk *clk_25m;
>> + struct clk *clk_oscout1_mux;
>> + struct clk *clk_oscout1;
>> +
>> + st_data = dev_get_platdata(&pdev->dev);
>> + if (!st_data || !st_data->base)
>> + return -EINVAL;
>> +
>> + clk_48m = clk_register_fixed_rate(NULL, "clk48MHz", NULL, 0,
>> + 48000000);
>> + clk_25m = clk_register_fixed_rate(NULL, "clk25MHz", NULL, 0,
>> + 25000000);
>> +
>> + clk_oscout1_mux = clk_register_mux(NULL, "oscout1_mux",
>> + clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
>> + 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
>> +
>> + clk_set_parent(clk_oscout1_mux, clk_25m);
>> +
>> + clk_oscout1 = clk_register_gate(NULL, "oscout1", "oscout1_mux",
>> + 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
>> + CLK_GATE_SET_TO_DISABLE, NULL);
>> +
>> + clk_register_clkdev(clk_oscout1, "oscout1", NULL);
>
> Can you use the clk_hw registration and clkdev APIs? It would mean that
> clk_set_parent() call up above would still be needed but I guess that's
> OK. We don't currently have a way for non-DT based drivers to configure
> the parents of a clk when it's registered.
>
Accepted, Changing in v2 to use clk_hw_register_.
>> +
>> + return 0;
>> +}
>> +
>> diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-st.h
>> new file mode 100644
>> index 0000000..5ede980
>> --- /dev/null
>> +++ b/include/linux/platform_data/clk-st.h
>> @@ -0,0 +1,32 @@
>> +/*
>> + * clock framework for AMD Stoney based clock
>> + *
>> + * Copyright 2018 Advanced Micro Devices, Inc.
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#ifndef __CLK_ST_H
>> +#define __CLK_ST_H
>> +
>> +struct st_clk_data {
>> + void __iomem *base;
>
> Can you include compiler.h in this file for the __iomem usage?
>
Accepted. Will add in v2.
Thanks,
Akshu