what needs to be configured to get the /proc/power/state file i've
seen mentioned around here? i'd like to try swsusp again. the swsusp
docs seem a bit dated.
thanks.
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
--
____________________}John Flinchbaugh{______________________
| [email protected] http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
On Thu, 11 Sep 2003, John M Flinchbaugh wrote:
> what needs to be configured to get the /proc/power/state file i've
> seen mentioned around here? i'd like to try swsusp again. the swsusp
> docs seem a bit dated.
There is documentation in Documentation/power/*.txt.
However, in order to get suspend-to-disk working, you'll need a recent -mm
patch (e.g. 2.6.0-test5-mm1).
Pat
Hi!
> what needs to be configured to get the /proc/power/state file i've
> seen mentioned around here? i'd like to try swsusp again. the swsusp
> docs seem a bit dated.
Look for "revert swsusp to -test3" patch on lists, then use reboot() interface
to trigger it.
--
Pavel
Written on sharp zaurus, because my Velo1 broke. If you have Velo you don't need...