> unfortunately neither 2.4.23 or 2.4.24 will boot from the
> Mylex 170 Raid card
> (DAC960) with ACPI enabled, so I never get to lspci :(
Are you sure, you can verify it with acpi=off.
>
> I could perhaps capture the boot messages over serial port,
> if that would be
> helpful?
>
Yes, it's good thing to me.
On Sunday 18 Jan 2004 4:18 am, Yu, Luming wrote:
> > unfortunately neither 2.4.23 or 2.4.24 will boot from the
> > Mylex 170 Raid card
> > (DAC960) with ACPI enabled, so I never get to lspci :(
>
> Are you sure, you can verify it with acpi=off.
>
Yes, I'm sure. I's running the same kernel fine with pci=noacpi