Hi...
I am trying to build sensors 2.8.3 and it fails with:
make: *** No rule to make target `mach_mpspec.h', needed by `kernel/chips/vt1211.d'. Stop.
There is no mach_mpspec.h in include/linux nor include/linux/asm in the kernel
tree (I use 2.6.2-rc1-mm3). It is not included directly by sensors, but for
example, mpspec.h reads:
werewolf:/usr/src/linux/include/asm# grep mach_mpspec.h *
mpspec.h:#include <mach_mpspec.h>
all mach_mpspec.h are inside subarch dirs in include/asm (for example,
include/asm/mach-default/).
Workaround is to add -I/usr/src/linux/include/asm/mach-default.
But should not the contents be symlinked for the proper subarch ? IE
/usr/src/linux/include/asm/mach_mpspec.h -> mach-default/mach_mpspec.h
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.2-rc1-jam3 (gcc 3.3.2 (Mandrake Linux 10.0 3.3.2-4mdk))
>
> Workaround is to add -I/usr/src/linux/include/asm/mach-default.
i386 at least always include:
-Iinclude/asm-i386/mach-default
Which should let gcc include the file in question.
Try to compile with V=1 and post the full command line to gcc.
Sam
On Sun, 25 Jan 2004 20:11:06 +0100 Sam Ravnborg <[email protected]> wrote:
| >
| > Workaround is to add -I/usr/src/linux/include/asm/mach-default.
|
| i386 at least always include:
| -Iinclude/asm-i386/mach-default
| Which should let gcc include the file in question.
|
| Try to compile with V=1 and post the full command line to gcc.
JAM, how are you building the sensors modules?
I.e., is this just a "make modules" or are you building
modules that are outside of the kernel tree?
--
~Randy
On 01.25, Randy.Dunlap wrote:
> On Sun, 25 Jan 2004 20:11:06 +0100 Sam Ravnborg <[email protected]> wrote:
>
> | >
> | > Workaround is to add -I/usr/src/linux/include/asm/mach-default.
> |
> | i386 at least always include:
> | -Iinclude/asm-i386/mach-default
> | Which should let gcc include the file in question.
> |
> | Try to compile with V=1 and post the full command line to gcc.
>
> JAM, how are you building the sensors modules?
> I.e., is this just a "make modules" or are you building
> modules that are outside of the kernel tree?
>
Oops, my fault. I was trying to build userspace part from the lm_sensors
tarball, and I did not remember that kernel modules will not build.
Anyways, docs say that you can set COMPILE_KERNEL:=0 in Makefile to build
just userspace, but I think it is outdated. You have to 'make user user_install'.
Variable COMPILE_KERNEL is not used anywhere.
And, after building userspace libsensors, my temperatures still read at 400 C:
werewolf:~# sensors -v
sensors version 2.8.3
werewolf:~# sensors -s
werewolf:~# sensors
w83781d-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +2.02 V (min = +1.90 V, max = +2.10 V)
VCore 2: +1.98 V (min = +1.90 V, max = +2.10 V)
+3.3V: +3.22 V (min = +3.14 V, max = +3.46 V)
+5V: +5.00 V (min = +4.73 V, max = +5.24 V)
+12V: +12.04 V (min = +11.37 V, max = +12.59 V)
-12V: -12.29 V (min = -12.57 V, max = -11.35 V) ALARM
-5V: -4.98 V (min = -5.25 V, max = -4.74 V) ALARM
CPU0 Fan: 4500 RPM (min = 84375 RPM, div = 2) ALARM
CPU1 Fan: 4383 RPM (min = -1 RPM, div = 2) ALARM
CPU0 Tmp: +380?C (high = +0?C, hyst = +640?C) ALARM
CPU1 Tmp: +390.0?C (high = +800?C, hyst = +750?C)
vid: +2.000 V
???
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.2-rc1-jam3 (gcc 3.3.2 (Mandrake Linux 10.0 3.3.2-4mdk))