Hi,
just got that message when I tried to mount a cd
Kernel: 2.6.11.5
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA
Storage Controller (rev 03)
ATAPI CD-ROM, with removable media
Model Number: PIONEER DVD-RW DVR-K12RA
Serial Number: DBDL085110WL
Firmware Revision: 1.10
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 64.0kB
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* DEVICE RESET cmd
* PACKET command feature set
* Power Management feature set
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Oops: 0000 [#1]
PREEMPT
Modules linked in: isofs ext3 jbd md5 ipv6 pcmcia joydev evdev
yenta_socket rsrc_nonstatic pcmcia_core sd_mod snd_intel8x0m 8250_pci
8250 serial_core snd_intel8x0 snd_ac97_codec hw_random usb_storage
usb_midi snd_usb_audio snd_pcm snd_timer snd_page_alloc snd_usb_lib
snd_rawmidi snd eth1394 ehci_hcd uhci_hcd b44 mii ohci1394 dm_mod sg
audio sr_mod cdrom usbcore soundcore ide_scsi sbp2 scsi_mod ieee1394
rtc unix
CPU: 0
EIP: 0060:[<c01ad0c6>] Not tainted VLI
EFLAGS: 00010246 (2.6.11.5)
EIP is at get_kobj_path_length+0x26/0x40
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
ds: 007b es: 007b ss: 0068
Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)
Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
Call Trace:
[<c01ad15f>] kobject_get_path+0x1f/0x80
[<c01adb98>] do_kobject_uevent+0x28/0x110
[<c01adca8>] kobject_uevent+0x28/0x30
[<c015bade>] bdev_uevent+0x2e/0x50
[<c015bc76>] kill_block_super+0x26/0x60
[<c015ad9e>] deactivate_super+0x6e/0xa0
[<c015bc21>] get_sb_bdev+0x121/0x150
[<c0172050>] alloc_vfsmnt+0x90/0xd0
[<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
[<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
[<c015be67>] do_kern_mount+0x57/0xe0
[<c017332c>] do_new_mount+0x9c/0xe0
[<c0173a47>] do_mount+0x157/0x1b0
[<c0173893>] copy_mount_options+0x63/0xc0
[<c0173e3f>] sys_mount+0x9f/0xe0
[<c01031af>] syscall_call+0x7/0xb
Code: 90 8d 74 26 00 55 bd ff ff ff ff 57 56 be 01 00 00 00 53 8b 54
24 14 31 db 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 3a 89 e9 89 d8 <f2>
ae f7 d1 49 8b 52 24 8d 74 31 01 85 d2 75 ea 5b 89 f0 5e 5f
Markus
Rechberger Markus <[email protected]> wrote:
>
> Hi,
>
> just got that message when I tried to mount a cd
>
> ...
>
> EIP is at get_kobj_path_length+0x26/0x40
> eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
> esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
> ds: 007b es: 007b ss: 0068
> Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)
> Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
> d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
> 00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
> Call Trace:
> [<c01ad15f>] kobject_get_path+0x1f/0x80
> [<c01adb98>] do_kobject_uevent+0x28/0x110
> [<c01adca8>] kobject_uevent+0x28/0x30
> [<c015bade>] bdev_uevent+0x2e/0x50
> [<c015bc76>] kill_block_super+0x26/0x60
> [<c015ad9e>] deactivate_super+0x6e/0xa0
> [<c015bc21>] get_sb_bdev+0x121/0x150
> [<c0172050>] alloc_vfsmnt+0x90/0xd0
> [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
> [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
> [<c015be67>] do_kern_mount+0x57/0xe0
> [<c017332c>] do_new_mount+0x9c/0xe0
> [<c0173a47>] do_mount+0x157/0x1b0
> [<c0173893>] copy_mount_options+0x63/0xc0
> [<c0173e3f>] sys_mount+0x9f/0xe0
> [<c01031af>] syscall_call+0x7/0xb
Is this repeatable? If so, are you able to devise a formula which allows
others to releat it?
oh yes I tried to record a cd and something tried to mount the empty
cd - mount uses to segfault there.
On Wed, 23 Mar 2005 19:45:31 -0800, Andrew Morton <[email protected]> wrote:
> Rechberger Markus <[email protected]> wrote:
> >
> > Hi,
> >
> > just got that message when I tried to mount a cd
> >
> > ...
> >
> > EIP is at get_kobj_path_length+0x26/0x40
> > eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
> > esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
> > ds: 007b es: 007b ss: 0068
> > Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)
> > Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
> > d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
> > 00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
> > Call Trace:
> > [<c01ad15f>] kobject_get_path+0x1f/0x80
> > [<c01adb98>] do_kobject_uevent+0x28/0x110
> > [<c01adca8>] kobject_uevent+0x28/0x30
> > [<c015bade>] bdev_uevent+0x2e/0x50
> > [<c015bc76>] kill_block_super+0x26/0x60
> > [<c015ad9e>] deactivate_super+0x6e/0xa0
> > [<c015bc21>] get_sb_bdev+0x121/0x150
> > [<c0172050>] alloc_vfsmnt+0x90/0xd0
> > [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
> > [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
> > [<c015be67>] do_kern_mount+0x57/0xe0
> > [<c017332c>] do_new_mount+0x9c/0xe0
> > [<c0173a47>] do_mount+0x157/0x1b0
> > [<c0173893>] copy_mount_options+0x63/0xc0
> > [<c0173e3f>] sys_mount+0x9f/0xe0
> > [<c01031af>] syscall_call+0x7/0xb
>
> Is this repeatable? If so, are you able to devise a formula which allows
> others to releat it?
>
>
ok that problem is solved I set up scsi emulation for the cd/dvd
recorder which didn't work correctly, but it works fine with ide/ATAPI
support!
thanks anyway,
Markus
On Thu, 24 Mar 2005 07:48:02 +0100, Rechberger Markus
<[email protected]> wrote:
> oh yes I tried to record a cd and something tried to mount the empty
> cd - mount uses to segfault there.
>
>
> On Wed, 23 Mar 2005 19:45:31 -0800, Andrew Morton <[email protected]> wrote:
> > Rechberger Markus <[email protected]> wrote:
> > >
> > > Hi,
> > >
> > > just got that message when I tried to mount a cd
> > >
> > > ...
> > >
> > > EIP is at get_kobj_path_length+0x26/0x40
> > > eax: 00000000 ebx: 00000000 ecx: ffffffff edx: ddc3414c
> > > esi: 00000001 edi: 00000000 ebp: ffffffff esp: cd89bdd4
> > > ds: 007b es: 007b ss: 0068
> > > Process mount (pid: 5066, threadinfo=cd89a000 task=cd0595a0)
> > > Stack: d5666e00 c1430580 ffffffea ddc3414c c01ad15f ddc3414c 00000282 00000020
> > > d26f94b4 d5666e00 c1430580 ffffffea 00000000 c01adb98 ddc3414c 000000d0
> > > 00000020 00000064 fffffff4 d5666e00 c1430580 ffffffea cd915000 c01adca8
> > > Call Trace:
> > > [<c01ad15f>] kobject_get_path+0x1f/0x80
> > > [<c01adb98>] do_kobject_uevent+0x28/0x110
> > > [<c01adca8>] kobject_uevent+0x28/0x30
> > > [<c015bade>] bdev_uevent+0x2e/0x50
> > > [<c015bc76>] kill_block_super+0x26/0x60
> > > [<c015ad9e>] deactivate_super+0x6e/0xa0
> > > [<c015bc21>] get_sb_bdev+0x121/0x150
> > > [<c0172050>] alloc_vfsmnt+0x90/0xd0
> > > [<dec43fc0>] isofs_get_sb+0x30/0x40 [isofs]
> > > [<dec42cc0>] isofs_fill_super+0x0/0x6d0 [isofs]
> > > [<c015be67>] do_kern_mount+0x57/0xe0
> > > [<c017332c>] do_new_mount+0x9c/0xe0
> > > [<c0173a47>] do_mount+0x157/0x1b0
> > > [<c0173893>] copy_mount_options+0x63/0xc0
> > > [<c0173e3f>] sys_mount+0x9f/0xe0
> > > [<c01031af>] syscall_call+0x7/0xb
> >
> > Is this repeatable? If so, are you able to devise a formula which allows
> > others to releat it?
> >
> >
>