2021-05-10 22:01:30

by Johan Jonker

[permalink] [raw]
Subject: [PATCH] arm64: dts: rockchip: fix regulator-gpio states array

A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
sdmmcio-regulator: states:0:
[1800000, 1, 3300000, 0] is too long

dtbs_check expects regulator-gpio states in a format
of 2 per item, so fix them all.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
regulator/gpio-regulator.yaml

Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 ++--
arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 7a96be10e..bce6f8b7d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -78,8 +78,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0
- 3300000 0x1>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
vin-supply = <&vcc5v0_sys>;
};

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index f454ecf41..0d7326a24 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -77,8 +77,8 @@
regulator-settling-time-us = <5000>;
regulator-type = "voltage";
startup-delay-us = <2000>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
vin-supply = <&vcc_io_33>;
};

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 19959bfba..7d9481962 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -45,8 +45,8 @@
vcc_sdio: sdmmcio-regulator {
compatible = "regulator-gpio";
gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
regulator-name = "vcc_sdio";
regulator-type = "voltage";
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index beee5fbb3..5d7a9d96d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@ pp1800_pcie: &pp1800_s0 {
};

&ppvar_sd_card_io {
- states = <1800000 0x0 3300000 0x1>;
+ states = <1800000 0x0>, <3300000 0x1>;
regulator-max-microvolt = <3300000>;
};

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 32dcaf210..765b24a2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -247,8 +247,8 @@
enable-active-high;
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3000000 0x0>;
+ states = <1800000 0x1>,
+ <3000000 0x0>;

regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
--
2.11.0


2021-05-14 18:16:26

by Heiko Stübner

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: rockchip: fix regulator-gpio states array

On Mon, 10 May 2021 23:58:40 +0200, Johan Jonker wrote:
> A test with the command below gives this error:
>
> /arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
> sdmmcio-regulator: states:0:
> [1800000, 1, 3300000, 0] is too long
>
> dtbs_check expects regulator-gpio states in a format
> of 2 per item, so fix them all.
>
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: fix regulator-gpio states array
commit: b82f8e2992534aab0fa762a37376be30df263701

Best regards,
--
Heiko Stuebner <[email protected]>