In drivers/clocksource/, 3 drivers use "TIMER_CTRL_IE" with 3 different
values. Two of them (mps2-timer.c and timer-sp804.c/timer-sp.h) are
localized and left unmodifed.
One of them uses a shared header file (<soc/arc/timers.h>), which is
what is causing the "redefined" warnings, so change the macro name in
that driver only.
In file included from ../drivers/clocksource/timer-sp804.c:24:
../drivers/clocksource/timer-sp.h:25: error: "TIMER_CTRL_IE" redefined [-Werror]
25 | #define TIMER_CTRL_IE (1 << 5) /* VR */
../include/soc/arc/timers.h:20: note: this is the location of the previous definition
20 | #define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
Fixes: b26c2e3823ba ("ARC: breakout timer include code into separate header")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: [email protected]
Cc: Daniel Lezcano <[email protected]>
Cc: Thomas Gleixner <[email protected]>
---
drivers/clocksource/arc_timer.c | 2 +-
include/soc/arc/timers.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- linux-next-20210917.orig/include/soc/arc/timers.h
+++ linux-next-20210917/include/soc/arc/timers.h
@@ -17,7 +17,7 @@
#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
/* CTRL reg bits */
-#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
+#define TIMER_CTRL_IEN (1 << 0) /* Interrupt when Count reaches limit */
#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
#define ARC_TIMERN_MAX 0xFFFFFFFF
--- linux-next-20210917.orig/drivers/clocksource/arc_timer.c
+++ linux-next-20210917/drivers/clocksource/arc_timer.c
@@ -245,7 +245,7 @@ static void arc_timer_event_setup(unsign
write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */
- write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
+ write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IEN | TIMER_CTRL_NH);
}
Hi Randy,
I have one minor comment.
On 9/23/21 5:18 AM, Randy Dunlap wrote:
>
> --- linux-next-20210917.orig/include/soc/arc/timers.h
> +++ linux-next-20210917/include/soc/arc/timers.h
> @@ -17,7 +17,7 @@
> #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
>
> /* CTRL reg bits */
> -#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
> +#define TIMER_CTRL_IEN (1 << 0) /* Interrupt when Count reaches limit */
Could you change the name to "ARC_TIMER_CTRL_IE" instead? and while at it, please rename
"TIMER_CTRL_NH" to "ARC_TIMER_CTRL_NH" for obvious consistency reasons and saving us
from future clashes. Thank you!
--
Shahab
On 9/23/21 2:42 AM, Shahab Vahedi wrote:
> Hi Randy,
>
> I have one minor comment.
>
> On 9/23/21 5:18 AM, Randy Dunlap wrote:
>>
>> --- linux-next-20210917.orig/include/soc/arc/timers.h
>> +++ linux-next-20210917/include/soc/arc/timers.h
>> @@ -17,7 +17,7 @@
>> #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
>>
>> /* CTRL reg bits */
>> -#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
>> +#define TIMER_CTRL_IEN (1 << 0) /* Interrupt when Count reaches limit */
>
> Could you change the name to "ARC_TIMER_CTRL_IE" instead? and while at it, please rename
> "TIMER_CTRL_NH" to "ARC_TIMER_CTRL_NH" for obvious consistency reasons and saving us
> from future clashes. Thank you!
>
OK, no problem.
Thanks for the feedback.
--
~Randy