while doing an allyesconfig bootup on a PC the depca driver triggered
the crash below.
Ingo
------------------>
Calling initcall 0xc1ea0506: depca_module_init+0x0/0xd7()
PM: Adding info for platform:depca.0
depca: probe of depca.0 failed with error -16
PM: Removing info for platform:depca.0
kfree_debugcheck: out of range ptr 300h.
BUG at mm/slab.c:2910!
stopped custom tracer.
------------[ cut here ]------------
kernel BUG at mm/slab.c:2910!
invalid opcode: 0000 [#1]
PREEMPT SMP
Modules linked in:
CPU: 0
EIP: 0060:[<c0194367>] Not tainted VLI
EFLAGS: 00010286 (2.6.19.1-rt16 #494)
EIP is at kfree_debugcheck+0x52/0xa9
eax: 0000001a ebx: 00040000 ecx: c01356a9 edx: 00000001
esi: 00000300 edi: 00000300 ebp: f7c21ec4 esp: f7c21eb0
ds: 007b es: 007b ss: 0068 preempt: 00000001
Process swapper (pid: 1, ti=f7c21000 task=f7c30c50 task.ti=f7c21000)
Stack: c14f9371 c150c05d 00000b5e f772aea0 c1fd4ea0 f7c21ee8 c01953b2 00000300
fffffff0 f772b080 00000000 f772aea0 f772b080 c1902880 f7c21ef8 c06e3d0e
00000300 c19029f0 f7c21f0c c06dfcd9 f772aea8 c06dfe6e f772b080 f7c21f28
Call Trace:
[<c0106273>] show_trace_log_lvl+0x34/0x4a
[<c0106332>] show_stack_log_lvl+0xa9/0xb9
[<c010663e>] show_registers+0x1f5/0x290
[<c0106a3b>] die+0x1de/0x2db
[<c13deb95>] do_trap+0xac/0xca
[<c0106f73>] do_invalid_op+0xae/0xb8
[<c13de8a1>] error_code+0x39/0x40
[<c01953b2>] kfree+0x42/0xce
[<c06e3d0e>] platform_device_release+0x1e/0x38
[<c06dfcd9>] device_release+0x36/0x6b
[<c04f091c>] kobject_cleanup+0x4d/0x74
[<c04f095a>] kobject_release+0x17/0x19
[<c04f0f7a>] kref_put+0x5b/0x69
[<c04f02b6>] kobject_put+0x24/0x26
[<c06dfe6e>] put_device+0x1d/0x1f
[<c06e3cee>] platform_device_put+0x1b/0x1d
[<c1ea0598>] depca_module_init+0x92/0xd7
[<c0100567>] init+0x178/0x451
[<c0105feb>] kernel_thread_helper+0x7/0x10
=======================
Code: 24 e7 c3 50 c1 e8 00 17 fa ff e8 49 08 fd ff c7 44 24 08 5e 0b 00 00 c7 44 24 04 5d c0 50 c1 c7 04 24 71 93 4f c1 e8 df 16 fa ff <0f> 0b 5e 0b 5d c0 50 c1 6b c3 74 03 05 10 f2 35 c2 8b 00 84 c0
EIP: [<c0194367>] kfree_debugcheck+0x52/0xa9 SS:ESP 0068:f7c21eb0
<0>Kernel panic - not syncing: Attempted to kill init!
[<c0106273>] show_trace_log_lvl+0x34/0x4a
[<c01063a9>] show_trace+0x2c/0x2e
[<c01063d6>] dump_stack+0x2b/0x2d
[<c0134c93>] panic+0x67/0x124
[<c0137a0d>] do_exit+0xb8/0x9ed
[<c0106b30>] die+0x2d3/0x2db
[<c13deb95>] do_trap+0xac/0xca
[<c0106f73>] do_invalid_op+0xae/0xb8
[<c13de8a1>] error_code+0x39/0x40
[<c01953b2>] kfree+0x42/0xce
[<c06e3d0e>] platform_device_release+0x1e/0x38
[<c06dfcd9>] device_release+0x36/0x6b
[<c04f091c>] kobject_cleanup+0x4d/0x74
[<c04f095a>] kobject_release+0x17/0x19
[<c04f0f7a>] kref_put+0x5b/0x69
[<c04f02b6>] kobject_put+0x24/0x26
[<c06dfe6e>] put_device+0x1d/0x1f
[<c06e3cee>] platform_device_put+0x1b/0x1d
[<c1ea0598>] depca_module_init+0x92/0xd7
[<c0100567>] init+0x178/0x451
[<c0105feb>] kernel_thread_helper+0x7/0x10
=======================
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Wondering if there has been any update on this problem. I'm also getting a
kernel panic when I include the DEPCA nic in the build. Without it, the latest
git kernel works, but with it I get the panic. I am working on a new version of
the g4l project, and the latest kernels are working with some hardware that
the older ones don't, but this this fails, and I have at least 1 user that has this
nic. I've been getting about 9000 downloads per month on the project, so
would like to get it working. It does work with some of the older kernels on
the iso, but if a user has this nic and hardware that requires the newer
kernel.
On 18 Dec 2006 at 16:27, Ingo Molnar wrote:
Date sent: Mon, 18 Dec 2006 16:27:13 +0100
From: Ingo Molnar <[email protected]>
To: [email protected]
Copies to: Andrew Morton <[email protected]>
Subject: bug: depca_module_init() cleanup error
>
> while doing an allyesconfig bootup on a PC the depca driver triggered
> the crash below.
>
> Ingo
>
> ------------------>
> Calling initcall 0xc1ea0506: depca_module_init+0x0/0xd7()
> PM: Adding info for platform:depca.0
> depca: probe of depca.0 failed with error -16
> PM: Removing info for platform:depca.0
> kfree_debugcheck: out of range ptr 300h.
> BUG at mm/slab.c:2910!
> stopped custom tracer.
> ------------[ cut here ]------------
> kernel BUG at mm/slab.c:2910!
> invalid opcode: 0000 [#1]
> PREEMPT SMP
> Modules linked in:
> CPU: 0
> EIP: 0060:[<c0194367>] Not tainted VLI
> EFLAGS: 00010286 (2.6.19.1-rt16 #494)
> EIP is at kfree_debugcheck+0x52/0xa9
> eax: 0000001a ebx: 00040000 ecx: c01356a9 edx: 00000001
> esi: 00000300 edi: 00000300 ebp: f7c21ec4 esp: f7c21eb0
> ds: 007b es: 007b ss: 0068 preempt: 00000001
> Process swapper (pid: 1, ti=f7c21000 task=f7c30c50 task.ti=f7c21000)
> Stack: c14f9371 c150c05d 00000b5e f772aea0 c1fd4ea0 f7c21ee8 c01953b2 00000300
> fffffff0 f772b080 00000000 f772aea0 f772b080 c1902880 f7c21ef8 c06e3d0e
> 00000300 c19029f0 f7c21f0c c06dfcd9 f772aea8 c06dfe6e f772b080 f7c21f28
> Call Trace:
> [<c0106273>] show_trace_log_lvl+0x34/0x4a
> [<c0106332>] show_stack_log_lvl+0xa9/0xb9
> [<c010663e>] show_registers+0x1f5/0x290
> [<c0106a3b>] die+0x1de/0x2db
> [<c13deb95>] do_trap+0xac/0xca
> [<c0106f73>] do_invalid_op+0xae/0xb8
> [<c13de8a1>] error_code+0x39/0x40
> [<c01953b2>] kfree+0x42/0xce
> [<c06e3d0e>] platform_device_release+0x1e/0x38
> [<c06dfcd9>] device_release+0x36/0x6b
> [<c04f091c>] kobject_cleanup+0x4d/0x74
> [<c04f095a>] kobject_release+0x17/0x19
> [<c04f0f7a>] kref_put+0x5b/0x69
> [<c04f02b6>] kobject_put+0x24/0x26
> [<c06dfe6e>] put_device+0x1d/0x1f
> [<c06e3cee>] platform_device_put+0x1b/0x1d
> [<c1ea0598>] depca_module_init+0x92/0xd7
> [<c0100567>] init+0x178/0x451
> [<c0105feb>] kernel_thread_helper+0x7/0x10
> =======================
> Code: 24 e7 c3 50 c1 e8 00 17 fa ff e8 49 08 fd ff c7 44 24 08 5e 0b 00 00 c7 44 24 04 5d c0 50 c1 c7 04 24 71 93 4f c1 e8 df 16 fa ff <0f> 0b 5e 0b 5d c0 50 c1 6b c3 74 03 05 10 f2 35 c2 8b 00 84 c0
> EIP: [<c0194367>] kfree_debugcheck+0x52/0xa9 SS:ESP 0068:f7c21eb0
> <0>Kernel panic - not syncing: Attempted to kill init!
> [<c0106273>] show_trace_log_lvl+0x34/0x4a
> [<c01063a9>] show_trace+0x2c/0x2e
> [<c01063d6>] dump_stack+0x2b/0x2d
> [<c0134c93>] panic+0x67/0x124
> [<c0137a0d>] do_exit+0xb8/0x9ed
> [<c0106b30>] die+0x2d3/0x2db
> [<c13deb95>] do_trap+0xac/0xca
> [<c0106f73>] do_invalid_op+0xae/0xb8
> [<c13de8a1>] error_code+0x39/0x40
> [<c01953b2>] kfree+0x42/0xce
> [<c06e3d0e>] platform_device_release+0x1e/0x38
> [<c06dfcd9>] device_release+0x36/0x6b
> [<c04f091c>] kobject_cleanup+0x4d/0x74
> [<c04f095a>] kobject_release+0x17/0x19
> [<c04f0f7a>] kref_put+0x5b/0x69
> [<c04f02b6>] kobject_put+0x24/0x26
> [<c06dfe6e>] put_device+0x1d/0x1f
> [<c06e3cee>] platform_device_put+0x1b/0x1d
> [<c1ea0598>] depca_module_init+0x92/0xd7
> [<c0100567>] init+0x178/0x451
> [<c0105feb>] kernel_thread_helper+0x7/0x10
> =======================
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
+----------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
mailto:[email protected]
mailto:[email protected]
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
+----------------------------------------------------------+
http://setiathome.berkeley.edu
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC TOTAL CREDITS SETI@HOME/EINSTEIN@HOME
Total Credits 2594674.848944
Total Credits 409969.475419
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8 -- QDPGP 2.61c
Comment: http://community.wow.net/grt/qdpgp.html
iQA/AwUBRaQ4byzGQcr/2AKZEQIFQACcDWfQjg3zQzaQmf6JSN+wGv5AgMgAoOJA
O9rEXo5qioAqvO+tRTkHyTI8
=jWMQ
-----END PGP SIGNATURE-----