2006-12-22 07:22:52

by Divy Le Ray

[permalink] [raw]
Subject: [PATCH 10/10] cxgb3 - build files and versioning

From: Divy Le Ray <[email protected]>

This patch implements build files and versioning for the
Chelsio T3 network adapter's driver.

Signed-off-by: Divy Le Ray <[email protected]>
---

drivers/net/Kconfig | 18 ++++++++++++++++++
drivers/net/Makefile | 1 +
drivers/net/cxgb3/Makefile | 8 ++++++++
drivers/net/cxgb3/version.h | 24 ++++++++++++++++++++++++
4 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8aa8dd0..f8742f1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2392,6 +2392,24 @@ config CHELSIO_T1_NAPI
NAPI is a driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card.

+config CHELSIO_T3
+ tristate "Chelsio Communications T3 10Gb Ethernet support"
+ depends on PCI
+ help
+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <[email protected]>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb3.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4c0d4e5..5c66643 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_CHELSIO_T1) += chelsio/
+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/cxgb3/Makefile
new file mode 100755
index 0000000..3434679
--- /dev/null
+++ b/drivers/net/cxgb3/Makefile
@@ -0,0 +1,8 @@
+#
+# Chelsio T3 driver
+#
+
+obj-$(CONFIG_CHELSIO_T3) += cxgb3.o
+
+cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \
+ xgmac.o sge.o l2t.o cxgb3_offload.o
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h
new file mode 100755
index 0000000..1413ea3
--- /dev/null
+++ b/drivers/net/cxgb3/version.h
@@ -0,0 +1,24 @@
+/*****************************************************************************
+ * *
+ * File: *
+ * version.h *
+ * *
+ * Description: *
+ * Chelsio driver version defines. *
+ * *
+ * Copyright (c) 2003 - 2006 Chelsio Communications, Inc. *
+ * All rights reserved. *
+ * *
+ * Maintainers: [email protected] *
+ * *
+ * http://www.chelsio.com *
+ * *
+ ****************************************************************************/
+/* $Date: 2006/10/31 18:57:51 $ $RCSfile: version.h,v $ $Revision: 1.3 $ */
+#ifndef __CHELSIO_VERSION_H
+#define __CHELSIO_VERSION_H
+#define DRV_DESC "Chelsio T3 Network Driver"
+#define DRV_NAME "cxgb3"
+/* Driver version */
+#define DRV_VERSION "1.0"
+#endif /* __CHELSIO_VERSION_H */