From: Frank Wunderlich <[email protected]>
This series adds Rockchip PCIe V3 support found on rk3568 SOC.
Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.
Frank Wunderlich (4):
dt-bindings: phy: rockchip: add PCIe v3 phy
dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
Shawn Lin (1):
phy: rockchip: Support PCIe v3
.../bindings/phy/rockchip,pcie3-phy.yaml | 80 +++++
.../devicetree/bindings/soc/rockchip/grf.yaml | 3 +
.../boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 90 +++++
arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++
drivers/phy/rockchip/Kconfig | 9 +
drivers/phy/rockchip/Makefile | 1 +
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 317 ++++++++++++++++++
include/linux/phy/pcie.h | 12 +
8 files changed, 634 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
create mode 100644 include/linux/phy/pcie.h
--
2.34.1