Delete the redundant word 'the'.
Delete the redundant word 'frames'.
Delete the redundant word 'set'.
Delete the redundant word 'slot'.
Signed-off-by: Jilin Yuan <[email protected]>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
drivers/net/ethernet/intel/igb/e1000_mac.c | 2 +-
drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index cbe92fd23a70..8d6e44ee1895 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -2207,7 +2207,7 @@ s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 1277c5c7d099..205d577bdbba 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -854,7 +854,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw)
* 1: Rx flow control is enabled (we can receive pause
* frames but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
+ * but we do not receive pause frames).
* 3: Both Rx and TX flow control (symmetric) is enabled.
* other: No other values should be possible at this point.
*/
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 68be2976f539..85e8de511d35 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1945,7 +1945,7 @@ static void igb_setup_tx_mode(struct igb_adapter *adapter)
* However, when we do so, no frame from queue 2 and 3 are
* transmitted. It seems the MAX_TPKT_SIZE should not be great
* or _equal_ to the buffer size programmed in TXPBS. For this
- * reason, we set set MAX_ TPKT_SIZE to (4kB - 1) / 64.
+ * reason, we set MAX_ TPKT_SIZE to (4kB - 1) / 64.
*/
val = (4096 - 1) / 64;
wr32(E1000_I210_DTXMXPKTSZ, val);
@@ -9519,7 +9519,7 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
igb_down(adapter);
pci_disable_device(pdev);
- /* Request a slot slot reset. */
+ /* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
--
2.36.1