2007-12-29 08:58:23

by Philip Langdale

[permalink] [raw]
Subject: [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler

As pci config space is reinitialised on a suspend/resume cycle, the
disabler needs to work its magic at resume time. For symmetry this
change also explicitly enables the controller at suspend time but
it's not strictly necessary.

Signed-off-by: Philipl Langdale <[email protected]>

--- linux-2.6.24/drivers/mmc/host/ricoh_mmc.c 2007-12-28 17:18:18.000000000 -0800
+++ linux-2.6.24-phil/drivers/mmc/host/ricoh_mmc.c 2007-12-29 00:05:30.000000000 -0800
@@ -41,6 +41,46 @@

MODULE_DEVICE_TABLE(pci, pci_ids);

+static int ricoh_mmc_disable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ if (disable & 0x02) {
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller already disabled. Nothing to do.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now disabled.\n");
+
+ return 0;
+}
+
+static int ricoh_mmc_enable(struct pci_dev *fw_dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ pci_read_config_byte(fw_dev, 0xCA, &write_enable);
+ pci_read_config_byte(fw_dev, 0xCB, &disable);
+ pci_write_config_byte(fw_dev, 0xCA, 0x57);
+ pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
+ pci_write_config_byte(fw_dev, 0xCA, write_enable);
+
+ printk(KERN_INFO DRIVER_NAME
+ ": Controller is now re-enabled.\n");
+
+ return 0;
+}
+
static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -61,26 +101,12 @@
while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
pdev->bus == fw_dev->bus) {
- u8 write_enable;
- u8 disable;
-
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- if (disable & 0x02) {
- printk(KERN_INFO DRIVER_NAME
- ": Controller already disabled. Nothing to do.\n");
+ if (ricoh_mmc_disable(fw_dev) != 0) {
return -ENODEV;
}

- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
pci_set_drvdata(pdev, fw_dev);

- printk(KERN_INFO DRIVER_NAME
- ": Controller is now disabled.\n");
-
break;
}
}
@@ -96,30 +122,51 @@

static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
{
- u8 write_enable;
- u8 disable;
struct pci_dev *fw_dev = NULL;

fw_dev = pci_get_drvdata(pdev);
BUG_ON(fw_dev == NULL);

- pci_read_config_byte(fw_dev, 0xCA, &write_enable);
- pci_read_config_byte(fw_dev, 0xCB, &disable);
- pci_write_config_byte(fw_dev, 0xCA, 0x57);
- pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
- pci_write_config_byte(fw_dev, 0xCA, write_enable);
-
- printk(KERN_INFO DRIVER_NAME
- ": Controller is now re-enabled.\n");
+ ricoh_mmc_enable(fw_dev);

pci_set_drvdata(pdev, NULL);
}

+static int ricoh_mmc_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Suspending.\n");
+
+ ricoh_mmc_enable(fw_dev);
+
+ return 0;
+}
+
+static int ricoh_mmc_resume (struct pci_dev *pdev)
+{
+ struct pci_dev *fw_dev = NULL;
+
+ fw_dev = pci_get_drvdata(pdev);
+ BUG_ON(fw_dev == NULL);
+
+ printk(KERN_INFO DRIVER_NAME ": Resuming.\n");
+
+ ricoh_mmc_disable(fw_dev);
+
+ return 0;
+}
+
static struct pci_driver ricoh_mmc_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = ricoh_mmc_probe,
.remove = __devexit_p(ricoh_mmc_remove),
+ .suspend = ricoh_mmc_suspend,
+ .resume = ricoh_mmc_resume,
};

/*****************************************************************************\


2008-01-05 22:20:27

by Pierre Ossman

[permalink] [raw]
Subject: Re: [PATCH] mmc: Handle suspend/resume in Ricoh MMC disabler

On Sat, 29 Dec 2007 00:11:42 -0800
Philip Langdale <[email protected]> wrote:

> As pci config space is reinitialised on a suspend/resume cycle, the
> disabler needs to work its magic at resume time. For symmetry this
> change also explicitly enables the controller at suspend time but
> it's not strictly necessary.
>
> Signed-off-by: Philipl Langdale <[email protected]>
>

Thanks applied.

Your patch was a bit borked though (a bunch of extra spaces). You should have a look at that for future patches.

Rgds
Pierre


Attachments:
signature.asc (197.00 B)