Hi Linus, here is the weekly report for regressions introduced during
this cycle. The short story: we have quite a few regressions for which
fixes are available (most of them reviewed or even in -next), but only
queued for 6.10 (most of them) or not yet fully ready.
This starts with the three fixes I mentioned in my extra report on
Thursday[1]. Dave send a revert[2] for the nouveau regression mentioned
in that report, but he didn't copy you, so I guess this is meant to
wait, too. Side note: the problem from Lyude I mentioned in that report
still needs more debugging.
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
Fixes for a ath11k regression fall through the cracks and will likely be
merged soon[3]; the fix for another ath11k regression only reported on
Friday exists, but will only be formally submitted in the next few days[4].
[3] https://lore.kernel.org/linux-wireless/[email protected]/
[4] https://lore.kernel.org/linux-wireless/[email protected]/
and https://lore.kernel.org/linux-wireless/[email protected]/
For the record: Kalle yesterday reported a suspend regression that made
stress test stalls within 30 minutes, but that one is not bisected yet[5].
[5] https://lore.kernel.org/lkml/[email protected]/
Ciao, Thorsten
---
Hi, this is regzbot, the Linux kernel regression tracking bot.
Currently I'm aware of 10 regressions in linux-mainline. Find the
current status below and the latest on the web:
https://linux-regtracking.leemhuis.info/regzbot/mainline/
Bye bye, hope to see you soon for the next report.
Regzbot (on behalf of Thorsten Leemhuis)
======================================================
current cycle (v6.8.. aka v6.9-rc), culprit identified
======================================================
[ *NEW* ] ath11k: connection to 6 GHz AP fails
----------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/linux-wireless/[email protected]/
By Kalle Valo; 1 days ago; 1 activities, latest 1 days ago.
Introduced in bc8a0fac8677 (v6.9-rc1)
Fix incoming:
* wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz AP
https://lore.kernel.org/regressions/[email protected]/
[ *NEW* ] ath11k: WCN6750 firmware crashes during initialisation
----------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/linux-wireless/[email protected]/
By Luca Weiss; 2 days ago; 10 activities, latest 1 days ago.
Introduced in f019f4dff2e4 (v6.9-rc1)
Recent activities from: Carl Huang (5), Luca Weiss (3), Kalle Valo (2)
2 patch postings are associated with this regression, the latest is this:
* Re: [PATCH 1/2] wifi: ath11k: supports 2 station interfaces
https://lore.kernel.org/linux-wireless/[email protected]/
2 days ago, by Carl Huang
[ *NEW* ] nouveau: init failed, no display output
-------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/stable/[email protected]/
https://lore.kernel.org/stable/[email protected]/
By Dan Moulding and Dan Moulding; 5 days ago; 4 activities, latest 2 days ago.
Introduced in 52a6947bf576 (v6.9-rc7)
Recent activities from: Dan Moulding (2), David Airlie (1), Linux
regression tracking (Thorsten Leemhuis) (1)
x86/topology: system stopped booting
------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Lyude Paul; 24 days ago; 19 activities, latest 2 days ago.
Introduced in f0551af02130 (v6.9-rc1)
Recent activities from: Lyude Paul (3), Thomas Gleixner (2), Mario
Limonciello (1)
2 patch postings are associated with this regression, the latest is this:
* Re: Early boot regression from f0551af0213 ("x86/topology: Ignore non-present APIC IDs in a present package")
https://lore.kernel.org/lkml/87le59vw1y.ffs@tglx/
22 days ago, by Thomas Gleixner
net: Bluetooth: firmware loading problems with older firmware
-------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Mike Lothian; 40 days ago; 12 activities, latest 3 days ago.
Introduced in 1cb63d80fff6 (v6.9-rc1)
Fix incoming:
* Bluetooth: btusb: Fix the patch for MT7920 the affected to MT7921
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=master&id=5e970bdf73e619935a8977f9f22b581480211164
Ryzen 7840HS CPU single core never boosts to max frequency
----------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/bugzilla.kernel.org/218759/
https://bugzilla.kernel.org/show_bug.cgi?id=218759
By Gaha; 20 days ago; 45 activities, latest 4 days ago.
Introduced in f3a052391822 (v6.9-rc1)
Fix incoming:
* cpufreq: amd-pstate: fix the highest frequency issue which limit performance
https://lore.kernel.org/regressions/[email protected]/
leds: hangs on boot
-------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Ben Greear; 39 days ago; 29 activities, latest 4 days ago.
Introduced in f5c31bcf604d (v6.9-rc1)
Fix incoming:
* wifi: iwlwifi: Use request_module_nowait
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?h=master&id=3d913719df14c28c4d3819e7e6d150760222bda4
kbuild: deb-pkg and bindeb-pkg: build failure (and slowness, too)
-----------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Ingo Molnar; 7 days ago; 5 activities, latest 7 days ago.
Introduced in 1d7bae8f8c85 (v6.9-rc1)
===================================================
current cycle (v6.8.. aka v6.9-rc), unknown culprit
===================================================
[ *NEW* ] x86: mitigations: suspend stress test stalls within 30 minutes
------------------------------------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
By Kalle Valo; 0 days ago; 4 activities, latest 0 days ago.
Introduced in v6.9-rc3..v6.9-rc6
Recent activities from: Kalle Valo (2), Borislav Petkov (2)
net: Beaglebone Ethernet Probe Failure In 6.8+
----------------------------------------------
https://linux-regtracking.leemhuis.info/regzbot/regression/lore/Zh/tyozk1n0cFv+l@euler/
https://lore.kernel.org/netdev/Zh%2Ftyozk1n0cFv%2Bl@euler/
By Colin Foster; 24 days ago; 8 activities, latest 13 days ago.
Introduced in v6.8..v6.9-rc5
One patch associated with this regression:
* Re: Beaglebone Ethernet Probe Failure In 6.8+
https://lore.kernel.org/netdev/Zicyc0pj3g7%2FMemK@euler/
19 days ago, by Colin Foster
=============
End of report
=============
All regressions marked '[ *NEW* ]' were added since the previous report,
which can be found here:
https://lore.kernel.org/r/[email protected]
Thanks for your attention, have a nice day!
Regzbot, your hard working Linux kernel regression tracking robot
P.S.: Wanna know more about regzbot or how to use it to track regressions
for your subsystem? Then check out the getting started guide or the
reference documentation:
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md
The short version: if you see a regression report you want to see
tracked, just send a reply to the report where you Cc
[email protected] with a line like this:
#regzbot introduced: v5.13..v5.14-rc1
If you want to fix a tracked regression, just do what is expected
anyway: add a 'Link:' tag with the url to the report, e.g.:
Link: https://lore.kernel.org/all/[email protected]/