drivers/pci/pci.c:2277: error: redefinition of ‘pci_msi_off’
include/linux/pci.h:786: note: previous definition of ‘pci_msi_off’ was here
Signed-off-by: Rusty Russell <[email protected]>
---
drivers/pci/pci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2266,6 +2266,7 @@ pci_intx(struct pci_dev *pdev, int enabl
}
}
+#ifdef CONFIG_PCI_MSI
/**
* pci_msi_off - disables any msi or msix capabilities
* @dev: the PCI device to operate on
@@ -2293,6 +2294,7 @@ void pci_msi_off(struct pci_dev *dev)
}
}
EXPORT_SYMBOL_GPL(pci_msi_off);
+#endif
#ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
(2010/06/16 13:51), Rusty Russell wrote:
> drivers/pci/pci.c:2277: error: redefinition of ‘pci_msi_off’
> include/linux/pci.h:786: note: previous definition of ‘pci_msi_off’ was here
>
> Signed-off-by: Rusty Russell <[email protected]>
> ---
> drivers/pci/pci.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2266,6 +2266,7 @@ pci_intx(struct pci_dev *pdev, int enabl
> }
> }
>
> +#ifdef CONFIG_PCI_MSI
> /**
> * pci_msi_off - disables any msi or msix capabilities
> * @dev: the PCI device to operate on
> @@ -2293,6 +2294,7 @@ void pci_msi_off(struct pci_dev *dev)
> }
> }
> EXPORT_SYMBOL_GPL(pci_msi_off);
> +#endif
>
> #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
> int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
Rusty, thank you for reporting it.
But I think this fix is not correct.
It looks like a bug in Michael's patch:
[PATCH for-2.6.35] virtio-pci: disable msi at startup
The patch includes a change as following:
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -780,7 +780,11 @@ int __must_check pci_set_mwi(struct pci_dev *dev);
> > int pci_try_set_mwi(struct pci_dev *dev);
> > void pci_clear_mwi(struct pci_dev *dev);
> > void pci_intx(struct pci_dev *dev, int enable);
> > +#ifdef CONFIG_PCI_MSI
> > void pci_msi_off(struct pci_dev *dev);
> > +#else
> > +static inline void pci_msi_off(struct pci_dev *dev) {}
> > +#endif
> > int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
> > int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
> > int pcix_get_max_mmrbc(struct pci_dev *dev);
According to the old commit f5f2b13129a6541debf8851bae843cbbf48298b7,
pci_msi_off() was designed to be available even when msi support is not
compiled in. So I think this change will make something wrong.
Michael, could you check your patch?
Thanks,
H.Seto
On Wed, Jun 16, 2010 at 03:09:11PM +0900, Hidetoshi Seto wrote:
> (2010/06/16 13:51), Rusty Russell wrote:
> > drivers/pci/pci.c:2277: error: redefinition of ‘pci_msi_off’
> > include/linux/pci.h:786: note: previous definition of ‘pci_msi_off’ was here
> >
> > Signed-off-by: Rusty Russell <[email protected]>
> > ---
> > drivers/pci/pci.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -2266,6 +2266,7 @@ pci_intx(struct pci_dev *pdev, int enabl
> > }
> > }
> >
> > +#ifdef CONFIG_PCI_MSI
> > /**
> > * pci_msi_off - disables any msi or msix capabilities
> > * @dev: the PCI device to operate on
> > @@ -2293,6 +2294,7 @@ void pci_msi_off(struct pci_dev *dev)
> > }
> > }
> > EXPORT_SYMBOL_GPL(pci_msi_off);
> > +#endif
> >
> > #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
> > int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
>
> Rusty, thank you for reporting it.
> But I think this fix is not correct.
>
> It looks like a bug in Michael's patch:
> [PATCH for-2.6.35] virtio-pci: disable msi at startup
>
> The patch includes a change as following:
>
> > > --- a/include/linux/pci.h
> > > +++ b/include/linux/pci.h
> > > @@ -780,7 +780,11 @@ int __must_check pci_set_mwi(struct pci_dev *dev);
> > > int pci_try_set_mwi(struct pci_dev *dev);
> > > void pci_clear_mwi(struct pci_dev *dev);
> > > void pci_intx(struct pci_dev *dev, int enable);
> > > +#ifdef CONFIG_PCI_MSI
> > > void pci_msi_off(struct pci_dev *dev);
> > > +#else
> > > +static inline void pci_msi_off(struct pci_dev *dev) {}
> > > +#endif
> > > int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
> > > int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
> > > int pcix_get_max_mmrbc(struct pci_dev *dev);
>
> According to the old commit f5f2b13129a6541debf8851bae843cbbf48298b7,
> pci_msi_off() was designed to be available even when msi support is not
> compiled in. So I think this change will make something wrong.
>
> Michael, could you check your patch?
>
>
> Thanks,
> H.Seto
You are right. I didn't think this through: we must disable
the capability at startup even if the current kernel does not
support MSI, otherwise the device won't work.
Please apply this on top.
Signed-off-by: Michael S. Tsirkin <[email protected]>
---
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 31d8a12..7cb0084 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -780,11 +780,7 @@ int __must_check pci_set_mwi(struct pci_dev *dev);
int pci_try_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
void pci_intx(struct pci_dev *dev, int enable);
-#ifdef CONFIG_PCI_MSI
void pci_msi_off(struct pci_dev *dev);
-#else
-static inline void pci_msi_off(struct pci_dev *dev) {}
-#endif
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
int pcix_get_max_mmrbc(struct pci_dev *dev);
On Wed, 16 Jun 2010 11:22:40 +0300
"Michael S. Tsirkin" <[email protected]> wrote:
> On Wed, Jun 16, 2010 at 03:09:11PM +0900, Hidetoshi Seto wrote:
> > (2010/06/16 13:51), Rusty Russell wrote:
> > > drivers/pci/pci.c:2277: error: redefinition of ‘pci_msi_off’
> > > include/linux/pci.h:786: note: previous definition of ‘pci_msi_off’ was here
> > >
> > > Signed-off-by: Rusty Russell <[email protected]>
> > > ---
> > > drivers/pci/pci.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -2266,6 +2266,7 @@ pci_intx(struct pci_dev *pdev, int enabl
> > > }
> > > }
> > >
> > > +#ifdef CONFIG_PCI_MSI
> > > /**
> > > * pci_msi_off - disables any msi or msix capabilities
> > > * @dev: the PCI device to operate on
> > > @@ -2293,6 +2294,7 @@ void pci_msi_off(struct pci_dev *dev)
> > > }
> > > }
> > > EXPORT_SYMBOL_GPL(pci_msi_off);
> > > +#endif
> > >
> > > #ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
> > > int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
> >
> > Rusty, thank you for reporting it.
> > But I think this fix is not correct.
> >
> > It looks like a bug in Michael's patch:
> > [PATCH for-2.6.35] virtio-pci: disable msi at startup
> >
> > The patch includes a change as following:
> >
> > > > --- a/include/linux/pci.h
> > > > +++ b/include/linux/pci.h
> > > > @@ -780,7 +780,11 @@ int __must_check pci_set_mwi(struct pci_dev *dev);
> > > > int pci_try_set_mwi(struct pci_dev *dev);
> > > > void pci_clear_mwi(struct pci_dev *dev);
> > > > void pci_intx(struct pci_dev *dev, int enable);
> > > > +#ifdef CONFIG_PCI_MSI
> > > > void pci_msi_off(struct pci_dev *dev);
> > > > +#else
> > > > +static inline void pci_msi_off(struct pci_dev *dev) {}
> > > > +#endif
> > > > int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
> > > > int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
> > > > int pcix_get_max_mmrbc(struct pci_dev *dev);
> >
> > According to the old commit f5f2b13129a6541debf8851bae843cbbf48298b7,
> > pci_msi_off() was designed to be available even when msi support is not
> > compiled in. So I think this change will make something wrong.
> >
> > Michael, could you check your patch?
> >
> >
> > Thanks,
> > H.Seto
>
> You are right. I didn't think this through: we must disable
> the capability at startup even if the current kernel does not
> support MSI, otherwise the device won't work.
>
> Please apply this on top.
>
> Signed-off-by: Michael S. Tsirkin <[email protected]>
>
> ---
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 31d8a12..7cb0084 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -780,11 +780,7 @@ int __must_check pci_set_mwi(struct pci_dev *dev);
> int pci_try_set_mwi(struct pci_dev *dev);
> void pci_clear_mwi(struct pci_dev *dev);
> void pci_intx(struct pci_dev *dev, int enable);
> -#ifdef CONFIG_PCI_MSI
> void pci_msi_off(struct pci_dev *dev);
> -#else
> -static inline void pci_msi_off(struct pci_dev *dev) {}
> -#endif
> int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
> int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
> int pcix_get_max_mmrbc(struct pci_dev *dev);
I don't have the #ifdef in pci.h or the export in my tree. Can you
guys fix this up in the virt tree and add my acked-by?
Thanks,
--
Jesse Barnes, Intel Open Source Technology Center