Hi Linus,
Please pull the below git tree for CRIS changes for 2.6.36.
Most of the changes are minor fixes from our internal CVS.
Thanks,
/^Jesper
The following changes since commit 26bfeea38a4a5daf52c8f01c986ca8680bf1f6a1:
Latchesar Ionkov (1):
9p: Pass the correct end of buffer to p9stat_read
are available in the git repository at:
git://http://www.jni.nu/cris.git for-linus
Jesper Nilsson (49):
CRIS: GENERIC_TIME fixes
CRIS: invoke oom-killer from page fault
cris: Pushdown the bkl from ioctl
cris: autoconvert trivial BKL users to private mutex
CRIS: gpio: don't call copy_to_user()/copy_from_user() while holding spinlocks
CRIS: v10: remove all BKL usage
CRIS: Remove CVS tag.
CRIS: Better link to rs485 in help
CRIS: Fasttimer: Remove obsolete ifdef
CRIS: Correct address of the romfs in boot image
CRIS: Add debug for assembler functions
CRIS: Simple insn reschedule to avoid interlocks.
CRIS: Faster syscall entry for CRISv32.
CRIS: Additional mmu settings for ARTPEC-3
CRIS: v32: Correct address for romfs in the image
CRIS: v32: Better irq mapping code
CRIS: v32: Correct path for intr_vect.h
CRIS: kgdb: Fix compilation errors
CRIS: Remove obsolete pinmux.c, now machine dependent.
CRIS: More ARTPEC-3 support and i2c-boardinfo.
CRIS: v32: Correct auto-restart of syscalls
CRIS: Minor formatting fix in traps.c
CRIS: Add debug symbols for assembler code
CRIS: Add debug info for assembler code
CRIS: Add debug info for assembler code
CRIS: Add more delays in DDR setup
CRIS: Update for ARTPEC-3
CRIS: Add debug for assembler macros
CRIS: Avoid compilation warning for puts
CRIS: Discard .note.gnu.build-id section
CRIS: Define __read_mostly for CRISv32
CRIS: Machine dependent dma.h
CRIS: Check if pointer is set before using it
CRIS: Machine dependent memmap.h
CRIS: Pagetable for ARTPEC-3
CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil
CRIS: New DMA defines for ARTPEC-3
CRIS: Better handling of pinmux settings
CRIS: Add include guard
CRIS: Better ARTPEC-3 support for gpio
CRIS: Add ARTPEC-3 and timestamps for sync-serial
CRIS: Return something from profile write
CRIS: Add cache aligned and read mostly data sections
CRIS: Discard exit.text and .data at runtime
CRIS: Fixup lookup for delay slot faults
CRIS: Don't take faults while in_atomic
CRIS: Add config for pausing a seg-faulting process
CRIS: Always dump registers for segfaulting process.
CRIS: Fix alignment problem for older ld
Joe Perches (1):
arch/cris: Remove unnecessary casts of private_data
arch/cris/Kconfig | 5 +-
arch/cris/Kconfig.debug | 6 +
arch/cris/arch-v10/drivers/Kconfig | 2 +-
arch/cris/arch-v10/drivers/eeprom.c | 2 -
arch/cris/arch-v10/drivers/gpio.c | 82 +++++---
arch/cris/arch-v10/drivers/i2c.c | 39 ++--
arch/cris/arch-v10/drivers/i2c.h | 3 +-
arch/cris/arch-v10/drivers/sync_serial.c | 30 ++-
arch/cris/arch-v10/kernel/fasttimer.c | 6 +-
arch/cris/arch-v10/kernel/head.S | 2 +-
arch/cris/arch-v10/kernel/time.c | 54 +-----
arch/cris/arch-v32/drivers/cryptocop.c | 28 ++-
arch/cris/arch-v32/drivers/i2c.c | 12 +-
arch/cris/arch-v32/drivers/mach-a3/gpio.c | 28 ++-
arch/cris/arch-v32/drivers/mach-fs/gpio.c | 42 +++--
arch/cris/arch-v32/drivers/sync_serial.c | 30 ++-
arch/cris/arch-v32/kernel/cacheflush.S | 5 +
arch/cris/arch-v32/kernel/entry.S | 80 +++++---
arch/cris/arch-v32/kernel/head.S | 44 ++++-
arch/cris/arch-v32/kernel/irq.c | 47 ++---
arch/cris/arch-v32/kernel/kgdb.c | 16 +-
arch/cris/arch-v32/kernel/kgdb_asm.S | 2 +-
arch/cris/arch-v32/kernel/pinmux.c | 229 --------------------
arch/cris/arch-v32/kernel/setup.c | 74 ++++++-
arch/cris/arch-v32/kernel/signal.c | 2 +-
arch/cris/arch-v32/kernel/time.c | 85 +++-----
arch/cris/arch-v32/kernel/traps.c | 6 +-
arch/cris/arch-v32/lib/checksum.S | 3 +
arch/cris/arch-v32/lib/checksumcopy.S | 3 +
arch/cris/arch-v32/lib/spinlock.S | 7 +
arch/cris/arch-v32/mach-a3/Kconfig | 4 +
arch/cris/arch-v32/mach-a3/dram_init.S | 16 ++-
arch/cris/arch-v32/mach-a3/hw_settings.S | 2 +
arch/cris/arch-v32/mm/init.c | 23 ++-
arch/cris/arch-v32/mm/mmu.S | 4 +
arch/cris/boot/Makefile | 2 +-
arch/cris/boot/compressed/misc.c | 65 +++----
arch/cris/include/arch-v32/arch/cache.h | 2 +
arch/cris/include/arch-v32/arch/dma.h | 80 +-------
arch/cris/include/arch-v32/arch/io.h | 20 +-
arch/cris/include/arch-v32/arch/memmap.h | 25 +--
arch/cris/include/arch-v32/arch/pgtable.h | 8 +
arch/cris/include/arch-v32/arch/uaccess.h | 7 +-
arch/cris/include/arch-v32/mach-a3/mach/dma.h | 27 +++
.../cris/include/arch-v32/mach-a3/mach/startup.inc | 28 +++-
arch/cris/include/arch-v32/mach-fs/mach/dma.h | 79 +++++++
arch/cris/include/arch-v32/mach-fs/mach/memmap.h | 24 ++
.../cris/include/arch-v32/mach-fs/mach/startup.inc | 5 +
arch/cris/include/asm/etraxgpio.h | 96 +++++++--
arch/cris/include/asm/sync_serial.h | 27 +++-
arch/cris/kernel/profile.c | 15 +-
arch/cris/kernel/time.c | 7 +-
arch/cris/kernel/vmlinux.lds.S | 14 ++-
arch/cris/mm/fault.c | 45 +++--
54 files changed, 857 insertions(+), 742 deletions(-)
delete mode 100644 arch/cris/arch-v32/kernel/pinmux.c
create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/dma.h
create mode 100644 arch/cris/include/arch-v32/mach-fs/mach/memmap.h
/^JN - Jesper Nilsson
--
Jesper Nilsson -- [email protected]
Hi Linus,
I lost one patch in the last pull request (sorry Claudio), please pull the below tree
which adds an ioctl to the CRISv10 serial driver.
The following changes since commit 9fe6206f400646a2322096b56c59891d530e8d51:
Linus Torvalds (1):
Linux 2.6.35
are available in the git repository at:
git://http://www.jni.nu/cris.git rs485fix
Claudio Scordino (1):
CRIS: ioctl for getting RS485 information
arch/cris/include/asm/ioctls.h | 1 +
drivers/serial/crisv10.c | 11 +++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
Thanks again,
/^JN - Jesper Nilsson
--
Jesper Nilsson -- [email protected]
Hi Linus,
Another change for 2.6.36, please pull the below repo for a compile error fix for CRIS.
(we hadn't defined io_remap_pfn_range for our architecture)
Thanks,
/Jesper
The following changes since commit f1d23ed8218ca5afaf178a6495253dbb7fc98f57:
Claudio Scordino (1):
CRIS: ioctl for getting RS485 information
are available in the git repository at:
git://http://www.jni.nu/cris.git io_remap_pfn_range
Jesper Nilsson (1):
CRIS: Define io_remap_pfn_range as remap_pfn_range
arch/cris/include/asm/pgtable.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
/^JN - Jesper Nilsson
--
Jesper Nilsson -- [email protected]