If remote device sends l2cap info request before read_remote_ext_feature
completes then mgmt_connected will be sent in hci_acldata_packet() and
remote name request wont be sent and eventually authentication wont happen
Hcidump log of the issue
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid)
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 3
< ACL data: handle 12 flags 0x00 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000002
L2CAP Signalling Channel
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 2
This patch moves sending mgmt_connected from hci_acldata_packet() to
l2cap_connect_req() since this code is to handle the scenario remote
device sends l2cap connect req too fast
---
v1 ---> Incorporated Johan's comments - Instead of fixing in hci_acldata_packet(),
move sending mgmt_connected to l2cap_connect_req since this code is mainly to
handle the scenario if remote device sends l2cap connection too fast
net/bluetooth/hci_core.c | 8 --------
net/bluetooth/l2cap_core.c | 11 +++++++++++
2 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 596660d..0f78e34 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2810,14 +2810,6 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb)
if (conn) {
hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF);
- hci_dev_lock(hdev);
- if (test_bit(HCI_MGMT, &hdev->dev_flags) &&
- !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
- mgmt_device_connected(hdev, &conn->dst, conn->type,
- conn->dst_type, 0, NULL, 0,
- conn->dev_class);
- hci_dev_unlock(hdev);
-
/* Send to upper protocol */
l2cap_recv_acldata(conn, skb, flags);
return;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 82a3bdc..7c7e932 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3722,6 +3722,17 @@ sendresp:
static int l2cap_connect_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u8 *data)
{
+ struct hci_dev *hdev = conn->hcon->hdev;
+ struct hci_conn *hcon = conn->hcon;
+
+ hci_dev_lock(hdev);
+ if (test_bit(HCI_MGMT, &hdev->dev_flags) &&
+ !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags))
+ mgmt_device_connected(hdev, &hcon->dst, hcon->type,
+ hcon->dst_type, 0, NULL, 0,
+ hcon->dev_class);
+ hci_dev_unlock(hdev);
+
l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0);
return 0;
}
--
1.7.9.5