Hi Heiko,
The necessary patches for this change have been merged into
bluetooth-next. Please pick this up at your convenience.
This patch enables using the Broadcom HCI UART driver with the
BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based
board (Veyron) and these changes have been tested on the Minnie variant
of the board (i.e. rk3288-veyron-minnie.dts).
The changes are applicable to the minnie, mickey, speedy and brain
variants (all of which use the Broadcom chips). The bt-activity node was
removed for all Veyron boards and shouldn't affect the boards using
Marvell chips since they aren't using this out-of-band wakeup gpio.
A previous portion of this series adding the compatible string to the
hci_bcm driver has already been merged into bluetooth-next:
https://lore.kernel.org/r/[email protected]
Another patch series to fix up the baudrate settings and configure the
PCM parameters has meen merged on bluetooth-next:
https://lore.kernel.org/linux-bluetooth/[email protected]/T/#t
Thanks
Abhishek
Changes in v2:
- Changed sco routing params to brcm,bt-pcm-int-params
Abhishek Pandit-Subedi (1):
ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron
arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++
.../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 22 +++++++
.../boot/dts/rk3288-veyron-chromebook.dtsi | 21 -------
arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 -
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++
arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++----------------
11 files changed, 155 insertions(+), 75 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
--
2.24.0.432.g9d3f5f5b63-goog