From: Tedd Ho-Jeong An <[email protected]>
This patch adds missing commands HCI_Read_RSSI and
HCI_Read_Transmit_Power_Level commands.
---
emulator/btdev.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/emulator/btdev.c b/emulator/btdev.c
index b4ed0e909..b21d5ca75 100644
--- a/emulator/btdev.c
+++ b/emulator/btdev.c
@@ -2013,6 +2013,24 @@ static int cmd_write_voice(struct btdev *dev, const void *data, uint8_t len)
return 0;
}
+static int cmd_read_tx_power_level(struct btdev *dev, const void *data,
+ uint8_t len)
+{
+ const struct bt_hci_cmd_read_tx_power *cmd = data;
+ struct bt_hci_rsp_read_tx_power rsp;
+
+ memset(&rsp, 0, sizeof(rsp));
+ rsp.handle = le16_to_cpu(cmd->handle);
+ rsp.status = BT_HCI_ERR_SUCCESS;
+ if (cmd->type)
+ rsp.level = 4;
+ else
+ rsp.level = -1;
+ cmd_complete(dev, BT_HCI_CMD_READ_TX_POWER, &rsp, sizeof(rsp));
+
+ return 0;
+}
+
static int cmd_read_num_iac(struct btdev *dev, const void *data, uint8_t len)
{
struct bt_hci_rsp_read_num_supported_iac rsp;
@@ -2182,6 +2200,21 @@ static int cmd_read_country_code(struct btdev *dev, const void *data,
return 0;
}
+static int cmd_read_rssi(struct btdev *dev, const void *data,
+ uint8_t len)
+{
+ const struct bt_hci_cmd_read_rssi *cmd = data;
+ struct bt_hci_rsp_read_rssi rsp;
+
+ memset(&rsp, 0, sizeof(rsp));
+ rsp.status = BT_HCI_ERR_SUCCESS;
+ rsp.handle = le16_to_cpu(cmd->handle);
+ rsp.rssi = -1;
+ cmd_complete(dev, BT_HCI_CMD_READ_RSSI, &rsp, sizeof(rsp));
+
+ return 0;
+}
+
static int cmd_enable_dut_mode(struct btdev *dev, const void *data,
uint8_t len)
{
@@ -2259,6 +2292,7 @@ static int cmd_enable_dut_mode(struct btdev *dev, const void *data,
CMD(BT_HCI_CMD_WRITE_CLASS_OF_DEV, cmd_write_class, NULL), \
CMD(BT_HCI_CMD_READ_VOICE_SETTING, cmd_read_voice, NULL), \
CMD(BT_HCI_CMD_WRITE_VOICE_SETTING, cmd_write_voice, NULL), \
+ CMD(BT_HCI_CMD_READ_TX_POWER, cmd_read_tx_power_level, NULL), \
CMD(BT_HCI_CMD_READ_NUM_SUPPORTED_IAC, cmd_read_num_iac, NULL), \
CMD(BT_HCI_CMD_READ_CURRENT_IAC_LAP, cmd_read_current_iac_lap, \
NULL), \
@@ -2273,6 +2307,7 @@ static int cmd_enable_dut_mode(struct btdev *dev, const void *data,
CMD(BT_HCI_CMD_READ_LOCAL_EXT_FEATURES, cmd_read_local_ext_features, \
NULL), \
CMD(BT_HCI_CMD_READ_COUNTRY_CODE, cmd_read_country_code, NULL), \
+ CMD(BT_HCI_CMD_READ_RSSI, cmd_read_rssi, NULL), \
CMD(BT_HCI_CMD_ENABLE_DUT_MODE, cmd_enable_dut_mode, NULL)
static void set_common_commands_bredr20(struct btdev *btdev)
@@ -2319,6 +2354,7 @@ static void set_common_commands_bredr20(struct btdev *btdev)
btdev->commands[9] |= 0x02; /* Write Class Of Device */
btdev->commands[9] |= 0x04; /* Read Voice Setting */
btdev->commands[9] |= 0x08; /* Write Voice Setting */
+ btdev->commands[10] |= 0x04; /* Read TX Power Level */
btdev->commands[11] |= 0x04; /* Read Number of Supported IAC */
btdev->commands[11] |= 0x08; /* Read Current IAC LAP */
btdev->commands[11] |= 0x10; /* Write Current IAC LAP */
@@ -2330,6 +2366,7 @@ static void set_common_commands_bredr20(struct btdev *btdev)
btdev->commands[13] |= 0x08; /* Write AFH Assess Mode */
btdev->commands[14] |= 0x40; /* Read Local Extended Features */
btdev->commands[15] |= 0x01; /* Read Country Code */
+ btdev->commands[15] |= 0x20; /* Read RSSI */
btdev->commands[16] |= 0x04; /* Enable Device Under Test Mode */
}
--
2.25.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=472555
---Test result---
Test Summary:
CheckPatch PASS 0.85 seconds
GitLint PASS 0.34 seconds
Prep - Setup ELL PASS 47.31 seconds
Build - Prep PASS 0.14 seconds
Build - Configure PASS 8.24 seconds
Build - Make PASS 201.85 seconds
Make Check PASS 8.79 seconds
Make Dist PASS 11.57 seconds
Make Dist - Configure PASS 5.02 seconds
Make Dist - Make PASS 82.43 seconds
Build w/ext ELL - Configure PASS 8.09 seconds
Build w/ext ELL - Make PASS 188.41 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Dist - PASS
Desc: Run 'make dist' and build the distribution tarball
##############################
Test: Make Dist - Configure - PASS
Desc: Configure the source from distribution tarball
##############################
Test: Make Dist - Make - PASS
Desc: Build the source from distribution tarball
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi Tedd,
On Fri, Apr 23, 2021 at 6:36 PM <[email protected]> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=472555
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.85 seconds
> GitLint PASS 0.34 seconds
> Prep - Setup ELL PASS 47.31 seconds
> Build - Prep PASS 0.14 seconds
> Build - Configure PASS 8.24 seconds
> Build - Make PASS 201.85 seconds
> Make Check PASS 8.79 seconds
> Make Dist PASS 11.57 seconds
> Make Dist - Configure PASS 5.02 seconds
> Make Dist - Make PASS 82.43 seconds
> Build w/ext ELL - Configure PASS 8.09 seconds
> Build w/ext ELL - Make PASS 188.41 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Dist - PASS
> Desc: Run 'make dist' and build the distribution tarball
>
> ##############################
> Test: Make Dist - Configure - PASS
> Desc: Configure the source from distribution tarball
>
> ##############################
> Test: Make Dist - Make - PASS
> Desc: Build the source from distribution tarball
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
>
>
>
> ---
> Regards,
> Linux Bluetooth
Applied, thanks.
--
Luiz Augusto von Dentz