2022-12-10 01:46:18

by Luiz Augusto von Dentz

[permalink] [raw]
Subject: pull request: bluetooth-next 2022-12-09

The following changes since commit 681bf011b9b5989c6e9db6beb64494918aab9a43:

eth: pse: add missing static inlines (2022-10-03 21:52:33 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2022-12-09

for you to fetch changes up to 7a637ef7e0c3308754d7ccf0edb0eec69f77bb81:

Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete (2022-12-07 13:11:50 -0800)

----------------------------------------------------------------
bluetooth-next pull request for net-next:

- Add a new VID/PID 0489/e0f2 for MT7922
- Add Realtek RTL8852BE support ID 0x0cb8:0xc559
- Add a new PID/VID 13d3/3549 for RTL8822CU
- Add support for broadcom BCM43430A0 & BCM43430A1
- Add CONFIG_BT_HCIBTUSB_POLL_SYNC
- Add CONFIG_BT_LE_L2CAP_ECRED
- Add support for CYW4373A0
- Add support for RTL8723DS
- Add more device IDs for WCN6855
- Add Broadcom BCM4377 family PCIe Bluetooth

----------------------------------------------------------------
Andy Chi (1):
Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922

Archie Pusaka (2):
Bluetooth: btusb: Introduce generic USB reset
Bluetooth: hci_sync: cancel cmd_timer if hci_open failed

Artem Lukyanov (1):
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559

Chen Zhongjin (1):
Bluetooth: Fix not cleanup led when bt_init fails

Chethan T N (2):
Bluetooth: Remove codec id field in vendor codec definition
Bluetooth: Fix support for Read Local Supported Codecs V2

Chethan Tumkur Narayan (1):
btusb: Avoid reset of ISOC endpoint alt settings to zero

Christophe JAILLET (1):
Bluetooth: Fix EALREADY and ELOOP cases in bt_status()

Gongwei Li (1):
Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU

Hawkins Jiawei (1):
Bluetooth: L2CAP: Fix memory leak in vhci_write

Hilda Wu (2):
Bluetooth: btrtl: Add btrealtek data struct
Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip

Igor Skalkin (1):
virtio_bt: Fix alignment in configuration struct

Inga Stotland (1):
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS

Ismael Ferreras Morezuelas (2):
Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk
Bluetooth: btusb: Add debug message for CSR controllers

Jiapeng Chong (1):
Bluetooth: Use kzalloc instead of kmalloc/memset

Kang Minchul (1):
Bluetooth: Use kzalloc instead of kmalloc/memset

Luca Weiss (1):
dt-bindings: bluetooth: broadcom: add BCM43430A0 & BCM43430A1

Luiz Augusto von Dentz (16):
Bluetooth: hci_sync: Fix not setting static address
Bluetooth: hci_sync: Fix not able to set force_static_address
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: btusb: Add CONFIG_BT_HCIBTUSB_POLL_SYNC
Bluetooth: btusb: Default CONFIG_BT_HCIBTUSB_POLL_SYNC=y
Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: Fix crash when replugging CSR fake controllers
Bluetooth: btusb: Fix new sparce warnings
Bluetooth: btusb: Fix existing sparce warning
Bluetooth: btintel: Fix existing sparce warnings
Bluetooth: hci_conn: Fix crash on hci_create_cis_sync
Bluetooth: ISO: Avoid circular locking dependency
Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete

Marek Vasut (2):
dt-bindings: net: broadcom-bluetooth: Add CYW4373A0 DT binding
Bluetooth: hci_bcm: Add CYW4373A0 support

Mateusz Jończyk (1):
Bluetooth: silence a dmesg error message in hci_request.c

Maxim Mikityanskiy (1):
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu

Michael S. Tsirkin (1):
Bluetooth: virtio_bt: fix device removal

Nicolas Cavallari (1):
Bluetooth: Work around SCO over USB HCI design defect

Pauli Virtanen (2):
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: hci_conn: use HCI dst_type values also for BIS

Raman Varabets (1):
Bluetooth: btusb: Add Realtek 8761BUV support ID 0x2B89:0x8761

Samuel Holland (1):
dt-bindings: net: realtek-bluetooth: Add RTL8723DS

Shengyu Qu (1):
Bluetooth: btusb: Add more device IDs for WCN6855

Soenke Huster (1):
Bluetooth: virtio_bt: Use skb_put to set length

Sungwoo Kim (1):
Bluetooth: L2CAP: Fix u8 overflow

Sven Peter (7):
dt-bindings: net: Add generic Bluetooth controller
dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth
arm64: dts: apple: t8103: Add Bluetooth controller
Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv Report
Bluetooth: Add quirk to disable extended scanning
Bluetooth: Add quirk to disable MWS Transport Configuration
Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards

Wang ShaoBo (3):
Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()
Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()

Yang Yingliang (9):
Bluetooth: hci_core: fix error handling in hci_register_dev()
Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in bcm4377_probe()
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()

Zhengchao Shao (1):
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()

Zhengping Jiang (1):
Bluetooth: hci_qca: only assign wakeup with serial port support

.../devicetree/bindings/net/bluetooth.txt | 5 -
.../net/bluetooth/bluetooth-controller.yaml | 29 +
.../net/bluetooth/brcm,bcm4377-bluetooth.yaml | 81 +
.../net/{ => bluetooth}/qualcomm-bluetooth.yaml | 6 +-
.../bindings/net/broadcom-bluetooth.yaml | 3 +
.../devicetree/bindings/net/realtek-bluetooth.yaml | 1 +
.../devicetree/bindings/soc/qcom/qcom,wcnss.yaml | 8 +-
MAINTAINERS | 2 +
arch/arm64/boot/dts/apple/t8103-j274.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j293.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j313.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j456.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j457.dts | 4 +
arch/arm64/boot/dts/apple/t8103-jxxx.dtsi | 8 +
drivers/bluetooth/Kconfig | 23 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btintel.c | 21 +-
drivers/bluetooth/btrtl.c | 7 +
drivers/bluetooth/btrtl.h | 21 +
drivers/bluetooth/btusb.c | 234 +-
drivers/bluetooth/hci_bcm.c | 13 +-
drivers/bluetooth/hci_bcm4377.c | 2514 ++++++++++++++++++++
drivers/bluetooth/hci_bcsp.c | 2 +-
drivers/bluetooth/hci_h5.c | 2 +-
drivers/bluetooth/hci_ll.c | 2 +-
drivers/bluetooth/hci_qca.c | 5 +-
drivers/bluetooth/virtio_bt.c | 37 +-
include/net/bluetooth/hci.h | 33 +-
include/net/bluetooth/hci_core.h | 8 +-
include/uapi/linux/virtio_bt.h | 8 +
net/bluetooth/6lowpan.c | 1 +
net/bluetooth/Kconfig | 11 +
net/bluetooth/af_bluetooth.c | 4 +-
net/bluetooth/hci_codec.c | 19 +-
net/bluetooth/hci_conn.c | 35 +-
net/bluetooth/hci_core.c | 12 +-
net/bluetooth/hci_debugfs.c | 2 +-
net/bluetooth/hci_event.c | 24 +-
net/bluetooth/hci_request.c | 2 +-
net/bluetooth/hci_sync.c | 40 +-
net/bluetooth/iso.c | 82 +-
net/bluetooth/l2cap_core.c | 91 +-
net/bluetooth/lib.c | 4 +-
net/bluetooth/mgmt.c | 2 +-
net/bluetooth/rfcomm/core.c | 2 +-
45 files changed, 3265 insertions(+), 160 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/bluetooth.txt
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
rename Documentation/devicetree/bindings/net/{ => bluetooth}/qualcomm-bluetooth.yaml (96%)
create mode 100644 drivers/bluetooth/hci_bcm4377.c


2022-12-12 21:00:57

by Jakub Kicinski

[permalink] [raw]
Subject: Re: pull request: bluetooth-next 2022-12-09

On Fri, 9 Dec 2022 17:34:56 -0800 Luiz Augusto von Dentz wrote:
> bluetooth-next pull request for net-next:
>
> - Add a new VID/PID 0489/e0f2 for MT7922
> - Add Realtek RTL8852BE support ID 0x0cb8:0xc559
> - Add a new PID/VID 13d3/3549 for RTL8822CU
> - Add support for broadcom BCM43430A0 & BCM43430A1
> - Add CONFIG_BT_HCIBTUSB_POLL_SYNC
> - Add CONFIG_BT_LE_L2CAP_ECRED
> - Add support for CYW4373A0
> - Add support for RTL8723DS
> - Add more device IDs for WCN6855
> - Add Broadcom BCM4377 family PCIe Bluetooth

Hm, it's pulling in the commits we merged into net and which
are already present in net-next but with a different hash/id.

With a small overlap which git can't figure out:

diff --cc drivers/bluetooth/btusb.c
index f05018988a17,2ad4efdd9e40..24a8ed3f0458
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@@ -2052,17 -2206,17 +2206,22 @@@ static int btusb_setup_csr(struct hci_d
bt_dev_err(hdev, "CSR: Local version length mismatch");
kfree_skb(skb);
return -EIO;
}

- rp = (struct hci_rp_read_local_version *)skb->data;
+ bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x",
+ rp->hci_ver, le16_to_cpu(rp->hci_rev));
+
+ bt_dev_info(hdev, "LMP ver=%u subver=%04x; manufacturer=%u",
+ rp->lmp_ver, le16_to_cpu(rp->lmp_subver),
+ le16_to_cpu(rp->manufacturer));

+ bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x; LMP ver=%u subver=%04x; manufacturer=%u",
+ le16_to_cpu(rp->hci_ver), le16_to_cpu(rp->hci_rev),
+ le16_to_cpu(rp->lmp_ver), le16_to_cpu(rp->lmp_subver),
+ le16_to_cpu(rp->manufacturer));
+

Could you rebase on top of net-next and resend so that the commits
which are already applied disappear?

2022-12-12 21:58:59

by Luiz Augusto von Dentz

[permalink] [raw]
Subject: Re: pull request: bluetooth-next 2022-12-09

Hi Jakub,

On Mon, Dec 12, 2022 at 12:36 PM Jakub Kicinski <[email protected]> wrote:
>
> On Fri, 9 Dec 2022 17:34:56 -0800 Luiz Augusto von Dentz wrote:
> > bluetooth-next pull request for net-next:
> >
> > - Add a new VID/PID 0489/e0f2 for MT7922
> > - Add Realtek RTL8852BE support ID 0x0cb8:0xc559
> > - Add a new PID/VID 13d3/3549 for RTL8822CU
> > - Add support for broadcom BCM43430A0 & BCM43430A1
> > - Add CONFIG_BT_HCIBTUSB_POLL_SYNC
> > - Add CONFIG_BT_LE_L2CAP_ECRED
> > - Add support for CYW4373A0
> > - Add support for RTL8723DS
> > - Add more device IDs for WCN6855
> > - Add Broadcom BCM4377 family PCIe Bluetooth
>
> Hm, it's pulling in the commits we merged into net and which
> are already present in net-next but with a different hash/id.
>
> With a small overlap which git can't figure out:
>
> diff --cc drivers/bluetooth/btusb.c
> index f05018988a17,2ad4efdd9e40..24a8ed3f0458
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@@ -2052,17 -2206,17 +2206,22 @@@ static int btusb_setup_csr(struct hci_d
> bt_dev_err(hdev, "CSR: Local version length mismatch");
> kfree_skb(skb);
> return -EIO;
> }
>
> - rp = (struct hci_rp_read_local_version *)skb->data;
> + bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x",
> + rp->hci_ver, le16_to_cpu(rp->hci_rev));
> +
> + bt_dev_info(hdev, "LMP ver=%u subver=%04x; manufacturer=%u",
> + rp->lmp_ver, le16_to_cpu(rp->lmp_subver),
> + le16_to_cpu(rp->manufacturer));
>
> + bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x; LMP ver=%u subver=%04x; manufacturer=%u",
> + le16_to_cpu(rp->hci_ver), le16_to_cpu(rp->hci_rev),
> + le16_to_cpu(rp->lmp_ver), le16_to_cpu(rp->lmp_subver),
> + le16_to_cpu(rp->manufacturer));
> +
>
> Could you rebase on top of net-next and resend so that the commits
> which are already applied disappear?

Sure, I will resend it shortly.

--
Luiz Augusto von Dentz