2022-12-18 16:28:08

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 6.1 85/85] Bluetooth: Add quirk to disable MWS Transport Configuration

From: Sven Peter <[email protected]>

[ Upstream commit ffcb0a445ec2d5753751437706aa0a7ea8351099 ]

Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to
support getting MWS Transport Layer Configuration,

< HCI Command: Read Local Supported... (0x04|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 68
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
[...]
Get MWS Transport Layer Configuration (Octet 30 - Bit 3)]
[...]

, but then don't actually allow the required command:

> HCI Event: Command Complete (0x0e) plen 15
Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1
Status: Command Disallowed (0x0c)
Number of transports: 0
Baud rate list: 0 entries
00 00 00 00 00 00 00 00 00 00

Signed-off-by: Sven Peter <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/bluetooth/hci.h | 10 ++++++++++
include/net/bluetooth/hci_core.h | 3 +++
net/bluetooth/hci_sync.c | 2 +-
3 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index d8abeac2fc1e..7a381fcef939 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -284,6 +284,16 @@ enum {
* during the hdev->setup vendor callback.
*/
HCI_QUIRK_BROKEN_EXT_SCAN,
+
+ /*
+ * When this quirk is set, the HCI_OP_GET_MWS_TRANSPORT_CONFIG command is
+ * disabled. This is required for some Broadcom controllers which
+ * erroneously claim to support MWS Transport Layer Configuration.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG,
};

/* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 3cd00be0fcd2..7f585e5dd71b 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1719,6 +1719,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
((dev)->le_features[3] & HCI_LE_CIS_PERIPHERAL)
#define bis_capable(dev) ((dev)->le_features[3] & HCI_LE_ISO_BROADCASTER)

+#define mws_transport_config_capable(dev) (((dev)->commands[30] & 0x08) && \
+ (!test_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &(dev)->quirks)))
+
/* ----- HCI protocols ----- */
#define HCI_PROTO_DEFER 0x01

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 1fc693122a47..3a68d9bc43b8 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4261,7 +4261,7 @@ static int hci_read_local_pairing_opts_sync(struct hci_dev *hdev)
/* Get MWS transport configuration if the HCI command is supported */
static int hci_get_mws_transport_config_sync(struct hci_dev *hdev)
{
- if (!(hdev->commands[30] & 0x08))
+ if (!mws_transport_config_capable(hdev))
return 0;

return __hci_cmd_sync_status(hdev, HCI_OP_GET_MWS_TRANSPORT_CONFIG,
--
2.35.1