From: Luiz Augusto von Dentz <[email protected]>
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by
dectecting the request is just for one connection, parameters already
exists and there is a connection.
Since this is a new behavior the revision is also updated to enable
userspace to detect it.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
---
net/bluetooth/hci_sync.c | 18 +++++++++++++++
net/bluetooth/mgmt.c | 47 ++++++++++++++++++++++++++++++++++++++--
2 files changed, 63 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 891cae8a30da..9f8ef175c251 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6712,3 +6712,21 @@ int hci_cancel_connect_sync(struct hci_dev *hdev, struct hci_conn *conn)
return -ENOENT;
}
+
+int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
+ struct hci_conn_params *params)
+{
+ struct hci_cp_le_conn_update cp;
+
+ memset(&cp, 0, sizeof(cp));
+ cp.handle = cpu_to_le16(conn->handle);
+ cp.conn_interval_min = cpu_to_le16(params->conn_min_interval);
+ cp.conn_interval_max = cpu_to_le16(params->conn_max_interval);
+ cp.conn_latency = cpu_to_le16(params->conn_latency);
+ cp.supervision_timeout = cpu_to_le16(params->supervision_timeout);
+ cp.min_ce_len = cpu_to_le16(0x0000);
+ cp.max_ce_len = cpu_to_le16(0x0000);
+
+ return __hci_cmd_sync_status(hdev, HCI_OP_LE_CONN_UPDATE,
+ sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 64e66d911c74..7e81eaddba85 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -42,7 +42,7 @@
#include "aosp.h"
#define MGMT_VERSION 1
-#define MGMT_REVISION 22
+#define MGMT_REVISION 23
static const u16 mgmt_commands[] = {
MGMT_OP_READ_INDEX_LIST,
@@ -7874,6 +7874,18 @@ static int remove_device(struct sock *sk, struct hci_dev *hdev,
return err;
}
+static int conn_update_sync(struct hci_dev *hdev, void *data)
+{
+ struct hci_conn_params *params = data;
+
+ conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
+ params->addr_type);
+ if (!conn)
+ return -ECANCELED
+
+ return hci_le_conn_update_sync(hdev, conn, params);
+}
+
static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
u16 len)
{
@@ -7907,13 +7919,15 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
hci_dev_lock(hdev);
- hci_conn_params_clear_disabled(hdev);
+ if (i > 1)
+ hci_conn_params_clear_disabled(hdev);
for (i = 0; i < param_count; i++) {
struct mgmt_conn_param *param = &cp->params[i];
struct hci_conn_params *hci_param;
u16 min, max, latency, timeout;
u8 addr_type;
+ bool update;
bt_dev_dbg(hdev, "Adding %pMR (type %u)", ¶m->addr.bdaddr,
param->addr.type);
@@ -7940,6 +7954,19 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
continue;
}
+ /* Detect when the loading is for an existing parameter then
+ * attempt to trigger the connection update procedure.
+ */
+ if (!i && params == 1) {
+ hci_param = hci_conn_params_lookup(hdev,
+ ¶m->addr.bdaddr,
+ addr_type);
+ if (hci_param)
+ update = true;
+ else
+ hci_conn_params_clear_disabled(hdev);
+ }
+
hci_param = hci_conn_params_add(hdev, ¶m->addr.bdaddr,
addr_type);
if (!hci_param) {
@@ -7951,6 +7978,22 @@ static int load_conn_param(struct sock *sk, struct hci_dev *hdev, void *data,
hci_param->conn_max_interval = max;
hci_param->conn_latency = latency;
hci_param->supervision_timeout = timeout;
+
+ if (update) {
+ struct hci_conn *conn;
+
+ conn = hci_conn_hash_lookup_le(hdev,
+ params->addr.bdaddr,
+ addr_type);
+ if (conn && conn->role == HCI_ROLE_MASTER &&
+ (conn->le_conn_min_interval != min ||
+ conn->le_conn_max_interval != max ||
+ conn->le_conn_latency != latency ||
+ conn->le_supervision_timeout != timeout))
+ hci_cmd_sync_queue(hdev, conn_update_sync,
+ hci_params, NULL);
+ }
+ }
}
hci_dev_unlock(hdev);
--
2.44.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=852044
---Test result---
Test Summary:
CheckPatch PASS 0.87 seconds
GitLint FAIL 0.49 seconds
SubjectPrefix PASS 0.12 seconds
BuildKernel FAIL 22.42 seconds
CheckAllWarning FAIL 24.76 seconds
CheckSparse FAIL 28.32 seconds
CheckSmatch FAIL 36.08 seconds
BuildKernel32 FAIL 21.36 seconds
TestRunnerSetup FAIL 494.29 seconds
TestRunner_l2cap-tester FAIL 0.14 seconds
TestRunner_iso-tester FAIL 0.13 seconds
TestRunner_bnep-tester FAIL 0.33 seconds
TestRunner_mgmt-tester FAIL 0.14 seconds
TestRunner_rfcomm-tester FAIL 0.14 seconds
TestRunner_sco-tester FAIL 0.14 seconds
TestRunner_ioctl-tester FAIL 0.14 seconds
TestRunner_mesh-tester FAIL 0.14 seconds
TestRunner_smp-tester FAIL 0.14 seconds
TestRunner_userchan-tester FAIL 0.15 seconds
IncrementalBuild FAIL 24.93 seconds
Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[RFC,v1] Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
1: T1 Title exceeds max length (81>80): "[RFC,v1] Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection"
##############################
Test: BuildKernel - FAIL
Desc: Build Kernel for Bluetooth
Output:
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: CheckAllWarning - FAIL
Desc: Run linux kernel with all warning enabled
Output:
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: CheckSparse - FAIL
Desc: Run sparse tool with linux kernel
Output:
net/bluetooth/af_bluetooth.c:226:25: warning: context imbalance in 'bt_accept_enqueue' - different lock contexts for basic block
drivers/bluetooth/hci_ag6xx.c:257:24: warning: restricted __le32 degrades to integer
drivers/bluetooth/hci_mrvl.c:170:23: warning: restricted __le16 degrades to integer
drivers/bluetooth/hci_mrvl.c:203:23: warning: restricted __le16 degrades to integer
net/bluetooth/hci_event.c: note: in included file (through include/net/bluetooth/hci_core.h):
./include/net/bluetooth/hci.h:2585:47: warning: array of flexible structures
./include/net/bluetooth/hci.h:2671:43: warning: array of flexible structures
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
drivers/bluetooth/hci_nokia.c:284:23: warning: incorrect type in assignment (different base types)
drivers/bluetooth/hci_nokia.c:284:23: expected unsigned short [usertype] baud
drivers/bluetooth/hci_nokia.c:284:23: got restricted __le16 [usertype]
drivers/bluetooth/hci_nokia.c:287:26: warning: incorrect type in assignment (different base types)
drivers/bluetooth/hci_nokia.c:287:26: expected unsigned short [usertype] sys_clk
drivers/bluetooth/hci_nokia.c:287:26: got restricted __le16 [usertype]
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bpa10x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bpa10x.o'
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: BuildKernel32 - FAIL
Desc: Build 32bit Kernel for Bluetooth
Output:
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunnerSetup - FAIL
Desc: Setup kernel and bluez for test-runner
Output:
Kernel:
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_l2cap-tester - FAIL
Desc: Run l2cap-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_bnep-tester - FAIL
Desc: Run bnep-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_rfcomm-tester - FAIL
Desc: Run rfcomm-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_sco-tester - FAIL
Desc: Run sco-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_ioctl-tester - FAIL
Desc: Run ioctl-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_smp-tester - FAIL
Desc: Run smp-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: TestRunner_userchan-tester - FAIL
Desc: Run userchan-tester with test-runner
Output:
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
qemu-system-x86_64: Back to tcg accelerator
qemu: could not open kernel file '/github/workspace/src/src/arch/x86/boot/bzImage': No such file or directory
##############################
Test: IncrementalBuild - FAIL
Desc: Incremental build with the patches in the series
Output:
[RFC,v1] Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection
net/bluetooth/mgmt.c: In function ‘conn_update_sync’:
net/bluetooth/mgmt.c:7881:2: error: ‘conn’ undeclared (first use in this function)
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^~~~
net/bluetooth/mgmt.c:7881:2: note: each undeclared identifier is reported only once for each function it appears in
net/bluetooth/mgmt.c:7881:51: error: ‘bdaddr_t’ {aka ‘struct <anonymous>’} has no member named ‘bdaddr’
7881 | conn = hci_conn_hash_lookup_le(hdev, params->addr.bdaddr,
| ^
net/bluetooth/mgmt.c:7886:2: error: expected ‘;’ before ‘return’
7886 | return hci_le_conn_update_sync(hdev, conn, params);
| ^~~~~~
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7960:13: error: ‘params’ undeclared (first use in this function); did you mean ‘param’?
7960 | if (!i && params == 1) {
| ^~~~~~
| param
net/bluetooth/mgmt.c:7992:15: error: ‘struct hci_conn’ has no member named ‘le_supervision_timeout’; did you mean ‘le_supv_timeout’?
7992 | conn->le_supervision_timeout != timeout))
| ^~~~~~~~~~~~~~~~~~~~~~
| le_supv_timeout
net/bluetooth/mgmt.c:7994:10: error: ‘hci_params’ undeclared (first use in this function); did you mean ‘hci_param’?
7994 | hci_params, NULL);
| ^~~~~~~~~~
| hci_param
In file included from net/bluetooth/mgmt.c:31:
net/bluetooth/mgmt.c: At top level:
./include/net/bluetooth/hci_core.h:1615:40: error: expected declaration specifiers or ‘...’ before ‘&’ token
1615 | #define hci_dev_unlock(d) mutex_unlock(&d->lock)
| ^
net/bluetooth/mgmt.c:7999:2: note: in expansion of macro ‘hci_dev_unlock’
7999 | hci_dev_unlock(hdev);
| ^~~~~~~~~~~~~~
net/bluetooth/mgmt.c:8001:2: error: expected identifier or ‘(’ before ‘return’
8001 | return mgmt_cmd_complete(sk, hdev->id, MGMT_OP_LOAD_CONN_PARAM, 0,
| ^~~~~~
net/bluetooth/mgmt.c:8003:1: error: expected identifier or ‘(’ before ‘}’ token
8003 | }
| ^
net/bluetooth/mgmt.c: In function ‘load_conn_param’:
net/bluetooth/mgmt.c:7997:2: error: control reaches end of non-void function [-Werror=return-type]
7997 | }
| ^
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/mgmt.o] Error 1
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
---
Regards,
Linux Bluetooth