Hello! My hardware:
Asus P535 details on http://www.kaa.org.ua/asus-p535/hardware.html
Bluetooth chip BCM2045B2 connected to the pxa internal usb host.
I think this chip need firmware, because it is can only search
How I can upload firmware to the this chip?
Marcel Holtmann написав(ла):
> Hi Oleg,
>
>> Asus P535 details on http://www.kaa.org.ua/asus-p535/hardware.html
>> Bluetooth chip BCM2045B2 connected to the pxa internal usb host.
>>
>> I think this chip need firmware, because it is can only search
>> How I can upload firmware to the this chip?
>
> no, the chip needs a HCI Reset call. Load btusb with reset=1. And send
> the output of /proc/bus/usb/devices for this dongle.
>
> Regards
>
> Marcel
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-bluetooth" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I am load modprobe btusb reset=1
Content of /proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 22/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.27 ohci_hcd
S: Product=PXA27x OHCI
S: SerialNumber=pxa27x
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=2045 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM2045A
S: SerialNumber=000000000000
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
When I try establish bnep connection:
localhost ~ # ifconfig bnep0 10.9.0.2
SIOCSIFFLAGS: Cannot assign requested address
So when I enable bluetooth in Windows Mobile
localhost ~ # ifconfig bnep0 10.9.0.2
work's fine :)
This is a Windows bluetooth log:
15:16:55:512 RadioInitPreLoad Start
15:16:55:553 Using USB, no PreLoad code
15:16:55:579 RadioInitPreLoad End
15:16:56:351 RadioInitPostLoad Start
15:16:56:365 BRCM_PostLoad TOP
15:16:56:385 Send_HCI_Read_BDaddr was successful
15:16:56:399 BRCM2045CFG2RAMmain(USB) TOP
15:16:56:412 Sending HCI_DOWNLOAD_MINIDRIVER
15:16:57:946 Writing config binary image through HCI_WRITE_RAM commands
15:16:57:971 Loaded config data file
\Windows\BCM2045B2_002.002.011.0131.0001.hcd, length=9459 bytes
15:16:57:985 Using USB, and using an external .hcd config file
15:16:57:000 target_ram_addr = 0x00:08:5c:70
15:16:57:014 launch_ram_addr = 0x00:08:8b:d8
15:16:57:039 HCIVSWriteRAM(addr=0x70:0x5c:0x08:0x00, nbytes=139)
15:16:57:067 HCIVSWriteRAM(addr=0xf7:0x5c:0x08:0x00, nbytes=255)
15:16:57:106 HCIVSWriteRAM(addr=0xf2:0x5d:0x08:0x00, nbytes=255)
15:16:57:136 HCIVSWriteRAM(addr=0xed:0x5e:0x08:0x00, nbytes=255)
15:16:57:165 HCIVSWriteRAM(addr=0xe8:0x5f:0x08:0x00, nbytes=255)
15:16:57:195 HCIVSWriteRAM(addr=0xe3:0x60:0x08:0x00, nbytes=255)
15:16:57:226 HCIVSWriteRAM(addr=0xde:0x61:0x08:0x00, nbytes=255)
15:16:57:257 HCIVSWriteRAM(addr=0xd9:0x62:0x08:0x00, nbytes=255)
15:16:57:287 HCIVSWriteRAM(addr=0xd4:0x63:0x08:0x00, nbytes=255)
15:16:57:317 HCIVSWriteRAM(addr=0xcf:0x64:0x08:0x00, nbytes=255)
15:16:57:347 HCIVSWriteRAM(addr=0xca:0x65:0x08:0x00, nbytes=255)
15:16:57:377 HCIVSWriteRAM(addr=0xc5:0x66:0x08:0x00, nbytes=255)
15:16:57:429 HCIVSWriteRAM(addr=0xc0:0x67:0x08:0x00, nbytes=255)
15:16:57:459 HCIVSWriteRAM(addr=0xbb:0x68:0x08:0x00, nbytes=255)
15:16:57:489 HCIVSWriteRAM(addr=0xb6:0x69:0x08:0x00, nbytes=255)
15:16:57:553 HCIVSWriteRAM(addr=0xb1:0x6a:0x08:0x00, nbytes=255)
15:16:57:654 HCIVSWriteRAM(addr=0xac:0x6b:0x08:0x00, nbytes=255)
15:16:57:729 HCIVSWriteRAM(addr=0xa7:0x6c:0x08:0x00, nbytes=255)
15:16:58:767 HCIVSWriteRAM(addr=0xa2:0x6d:0x08:0x00, nbytes=255)
15:16:58:890 HCIVSWriteRAM(addr=0x9d:0x6e:0x08:0x00, nbytes=255)
15:16:58:973 HCIVSWriteRAM(addr=0x98:0x6f:0x08:0x00, nbytes=255)
15:16:58:208 HCIVSWriteRAM(addr=0x93:0x70:0x08:0x00, nbytes=255)
15:16:58:384 HCIVSWriteRAM(addr=0x8e:0x71:0x08:0x00, nbytes=255)
15:16:58:607 HCIVSWriteRAM(addr=0x89:0x72:0x08:0x00, nbytes=255)
15:16:58:737 HCIVSWriteRAM(addr=0x84:0x73:0x08:0x00, nbytes=255)
15:16:59:972 HCIVSWriteRAM(addr=0x7f:0x74:0x08:0x00, nbytes=255)
15:16:59:025 HCIVSWriteRAM(addr=0x7a:0x75:0x08:0x00, nbytes=255)
15:16:59:126 HCIVSWriteRAM(addr=0x75:0x76:0x08:0x00, nbytes=255)
15:16:59:155 HCIVSWriteRAM(addr=0x70:0x77:0x08:0x00, nbytes=255)
15:16:59:372 HCIVSWriteRAM(addr=0x6b:0x78:0x08:0x00, nbytes=255)
15:16:59:447 HCIVSWriteRAM(addr=0x66:0x79:0x08:0x00, nbytes=255)
15:16:59:590 HCIVSWriteRAM(addr=0x61:0x7a:0x08:0x00, nbytes=255)
15:16:59:621 HCIVSWriteRAM(addr=0x5c:0x7b:0x08:0x00, nbytes=255)
15:16:59:670 HCIVSWriteRAM(addr=0x57:0x7c:0x08:0x00, nbytes=255)
15:16:59:711 HCIVSWriteRAM(addr=0x52:0x7d:0x08:0x00, nbytes=255)
15:16:59:752 HCIVSWriteRAM(addr=0x4d:0x7e:0x08:0x00, nbytes=255)
15:17:00:807 HCIVSWriteRAM(addr=0x48:0x7f:0x08:0x00, nbytes=222)
15:17:00:930 HCIVSWriteRAM(addr=0xd8:0x8b:0x08:0x00, nbytes=52)
15:17:00:949 HCI_WRITE_RAM commands done
15:17:00:964 Sending HCI_LAUNCH_RAM command
15:17:00:984 HCI_LAUNCH_RAM was successful
15:17:00:499 BRCM2045CFG2RAMmain() END, config data downloaded successfully
15:17:00:519 Send_HCI_Read_BDaddr was successful
15:17:00:534 Read BDAddr [00:1a:92:ab:e3:31] from the registry
15:17:00:554 Send_Broadcom_Write_BD_ADDR was successful
15:17:00:574 Send_HCI_Read_BDaddr was successful
15:17:00:599 HCIWriteChannelClassificationMode : bResult=1
15:17:00:614 HCIVSSetSleepModeParam() Mode=USB with
HOST_WAKE,HostIdleThreshold=10, HCIdleThreshold=10, BT_WAKE active HIGH,
HOST_WAKE active HIGH
15:17:00:628 USB AutoSleepOnSuspend=1, USB Resume Timeout = 3
15:17:00:650 HCIVSSetSleepModeParam(mode=5, timeout=3000ms): bResult=1
15:17:00:665 BRCM_PostLoad : RadioInitConfigureAudio set, configuring
2045 audio
15:17:00:686 HCIVSWriteSCOPCMIntParameters(0,2,0,0,0) : bResult=1
15:17:00:705 HCIVSWritePCMDataFormatParameters(0,0,2,3,1) : bResult=1
15:17:00:721 HCIVSWriteSCOTimeSlot(SCO Time Slot=0)
15:17:00:741 HCIVSWriteSCOTimeSlot : bResult=1
15:17:00:754 BRCM_PostLoad : RadioInitEnableCoexistence set, configuring
2045 BT/WLAN coexistence
15:17:01:774 HCIVSWriteCollaborationMode(1,1,0xcb7fbdb0,10) : bResult=1
15:17:01:787 BRCM_PostLoad END
15:17:01:801 RadioInitPostLoad End
Hi Oleg,
> Asus P535 details on http://www.kaa.org.ua/asus-p535/hardware.html
> Bluetooth chip BCM2045B2 connected to the pxa internal usb host.
>
> I think this chip need firmware, because it is can only search
> How I can upload firmware to the this chip?
no, the chip needs a HCI Reset call. Load btusb with reset=1. And send
the output of /proc/bus/usb/devices for this dongle.
Regards
Marcel
Any idea?
=D1=87=D0=B5=D1=82=D0=B2=D0=B5=D1=80 27 =D0=BB=D0=B8=D1=81=D1=82=D0=BE=D0=
=BF=D0=B0=D0=B4 2008 22:02:36 Oleg Kravchenko =D0=B2=D0=B8 =D0=BD=D0=B0=D0=
=BF=D0=B8=D1=81=D0=B0=D0=BB=D0=B8:
> Marcel Holtmann =D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0=D0=B2(=D0=BB=D0=B0):
> > Hi Oleg,
> >=20
> >> Asus P535 details on http://www.kaa.org.ua/asus-p535/hardware.html
> >> Bluetooth chip BCM2045B2 connected to the pxa internal usb host.
> >>=20
> >> I think this chip need firmware, because it is can only search
> >> How I can upload firmware to the this chip?
> >=20
> > no, the chip needs a HCI Reset call. Load btusb with reset=3D1. And send
> > the output of /proc/bus/usb/devices for this dongle.
> >=20
> > Regards
> >=20
> > Marcel
>=20
> I am load modprobe btusb reset=3D1
>=20
> Content of /proc/bus/usb/devices:
>=20
> T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 M=
xCh=3D 3
> B: Alloc=3D 22/900 us ( 2%), #Int=3D 1, #Iso=3D 0
> D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
> P: Vendor=3D1d6b ProdID=3D0001 Rev=3D 2.06
> S: Manufacturer=3DLinux 2.6.27 ohci_hcd
> S: Product=3DPXA27x OHCI
> S: SerialNumber=3Dpxa27x
> C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3De0 MxPwr=3D 0mA
> I:* If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
>=20
> T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 M=
xCh=3D 0
> D: Ver=3D 2.00 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
> P: Vendor=3D0a5c ProdID=3D2045 Rev=3D 1.12
> S: Manufacturer=3DBroadcom Corp
> S: Product=3DBCM2045A
> S: SerialNumber=3D000000000000
> C:* #Ifs=3D 4 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
> I:* If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
> E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
> I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dbtusb
> E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> I:* If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driver=
=3D(none)
> E: Ad=3D84(I) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
> E: Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
> I:* If#=3D 3 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver=
=3D(none)
>=20
> When I try establish bnep connection:
> localhost ~ # ifconfig bnep0 10.9.0.2
> SIOCSIFFLAGS: Cannot assign requested address
>=20
> So when I enable bluetooth in Windows Mobile
> localhost ~ # ifconfig bnep0 10.9.0.2
> work's fine :)
>=20
> This is a Windows bluetooth log:
> 15:16:55:512 RadioInitPreLoad Start
> 15:16:55:553 Using USB, no PreLoad code
> 15:16:55:579 RadioInitPreLoad End
> 15:16:56:351 RadioInitPostLoad Start
> 15:16:56:365 BRCM_PostLoad TOP
> 15:16:56:385 Send_HCI_Read_BDaddr was successful
> 15:16:56:399 BRCM2045CFG2RAMmain(USB) TOP
> 15:16:56:412 Sending HCI_DOWNLOAD_MINIDRIVER
> 15:16:57:946 Writing config binary image through HCI_WRITE_RAM commands
> 15:16:57:971 Loaded config data file
> \Windows\BCM2045B2_002.002.011.0131.0001.hcd, length=3D9459 bytes
> 15:16:57:985 Using USB, and using an external .hcd config file
> 15:16:57:000 target_ram_addr =3D 0x00:08:5c:70
> 15:16:57:014 launch_ram_addr =3D 0x00:08:8b:d8
> 15:16:57:039 HCIVSWriteRAM(addr=3D0x70:0x5c:0x08:0x00, nbytes=3D139)
> 15:16:57:067 HCIVSWriteRAM(addr=3D0xf7:0x5c:0x08:0x00, nbytes=3D255)
> 15:16:57:106 HCIVSWriteRAM(addr=3D0xf2:0x5d:0x08:0x00, nbytes=3D255)
> 15:16:57:136 HCIVSWriteRAM(addr=3D0xed:0x5e:0x08:0x00, nbytes=3D255)
> 15:16:57:165 HCIVSWriteRAM(addr=3D0xe8:0x5f:0x08:0x00, nbytes=3D255)
> 15:16:57:195 HCIVSWriteRAM(addr=3D0xe3:0x60:0x08:0x00, nbytes=3D255)
> 15:16:57:226 HCIVSWriteRAM(addr=3D0xde:0x61:0x08:0x00, nbytes=3D255)
> 15:16:57:257 HCIVSWriteRAM(addr=3D0xd9:0x62:0x08:0x00, nbytes=3D255)
> 15:16:57:287 HCIVSWriteRAM(addr=3D0xd4:0x63:0x08:0x00, nbytes=3D255)
> 15:16:57:317 HCIVSWriteRAM(addr=3D0xcf:0x64:0x08:0x00, nbytes=3D255)
> 15:16:57:347 HCIVSWriteRAM(addr=3D0xca:0x65:0x08:0x00, nbytes=3D255)
> 15:16:57:377 HCIVSWriteRAM(addr=3D0xc5:0x66:0x08:0x00, nbytes=3D255)
> 15:16:57:429 HCIVSWriteRAM(addr=3D0xc0:0x67:0x08:0x00, nbytes=3D255)
> 15:16:57:459 HCIVSWriteRAM(addr=3D0xbb:0x68:0x08:0x00, nbytes=3D255)
> 15:16:57:489 HCIVSWriteRAM(addr=3D0xb6:0x69:0x08:0x00, nbytes=3D255)
> 15:16:57:553 HCIVSWriteRAM(addr=3D0xb1:0x6a:0x08:0x00, nbytes=3D255)
> 15:16:57:654 HCIVSWriteRAM(addr=3D0xac:0x6b:0x08:0x00, nbytes=3D255)
> 15:16:57:729 HCIVSWriteRAM(addr=3D0xa7:0x6c:0x08:0x00, nbytes=3D255)
> 15:16:58:767 HCIVSWriteRAM(addr=3D0xa2:0x6d:0x08:0x00, nbytes=3D255)
> 15:16:58:890 HCIVSWriteRAM(addr=3D0x9d:0x6e:0x08:0x00, nbytes=3D255)
> 15:16:58:973 HCIVSWriteRAM(addr=3D0x98:0x6f:0x08:0x00, nbytes=3D255)
> 15:16:58:208 HCIVSWriteRAM(addr=3D0x93:0x70:0x08:0x00, nbytes=3D255)
> 15:16:58:384 HCIVSWriteRAM(addr=3D0x8e:0x71:0x08:0x00, nbytes=3D255)
> 15:16:58:607 HCIVSWriteRAM(addr=3D0x89:0x72:0x08:0x00, nbytes=3D255)
> 15:16:58:737 HCIVSWriteRAM(addr=3D0x84:0x73:0x08:0x00, nbytes=3D255)
> 15:16:59:972 HCIVSWriteRAM(addr=3D0x7f:0x74:0x08:0x00, nbytes=3D255)
> 15:16:59:025 HCIVSWriteRAM(addr=3D0x7a:0x75:0x08:0x00, nbytes=3D255)
> 15:16:59:126 HCIVSWriteRAM(addr=3D0x75:0x76:0x08:0x00, nbytes=3D255)
> 15:16:59:155 HCIVSWriteRAM(addr=3D0x70:0x77:0x08:0x00, nbytes=3D255)
> 15:16:59:372 HCIVSWriteRAM(addr=3D0x6b:0x78:0x08:0x00, nbytes=3D255)
> 15:16:59:447 HCIVSWriteRAM(addr=3D0x66:0x79:0x08:0x00, nbytes=3D255)
> 15:16:59:590 HCIVSWriteRAM(addr=3D0x61:0x7a:0x08:0x00, nbytes=3D255)
> 15:16:59:621 HCIVSWriteRAM(addr=3D0x5c:0x7b:0x08:0x00, nbytes=3D255)
> 15:16:59:670 HCIVSWriteRAM(addr=3D0x57:0x7c:0x08:0x00, nbytes=3D255)
> 15:16:59:711 HCIVSWriteRAM(addr=3D0x52:0x7d:0x08:0x00, nbytes=3D255)
> 15:16:59:752 HCIVSWriteRAM(addr=3D0x4d:0x7e:0x08:0x00, nbytes=3D255)
> 15:17:00:807 HCIVSWriteRAM(addr=3D0x48:0x7f:0x08:0x00, nbytes=3D222)
> 15:17:00:930 HCIVSWriteRAM(addr=3D0xd8:0x8b:0x08:0x00, nbytes=3D52)
> 15:17:00:949 HCI_WRITE_RAM commands done
> 15:17:00:964 Sending HCI_LAUNCH_RAM command
> 15:17:00:984 HCI_LAUNCH_RAM was successful
> 15:17:00:499 BRCM2045CFG2RAMmain() END, config data downloaded successful=
ly
> 15:17:00:519 Send_HCI_Read_BDaddr was successful
> 15:17:00:534 Read BDAddr [00:1a:92:ab:e3:31] from the registry
> 15:17:00:554 Send_Broadcom_Write_BD_ADDR was successful
> 15:17:00:574 Send_HCI_Read_BDaddr was successful
> 15:17:00:599 HCIWriteChannelClassificationMode : bResult=3D1
> 15:17:00:614 HCIVSSetSleepModeParam() Mode=3DUSB with
> HOST_WAKE,HostIdleThreshold=3D10, HCIdleThreshold=3D10, BT_WAKE active HI=
GH,
> HOST_WAKE active HIGH
> 15:17:00:628 USB AutoSleepOnSuspend=3D1, USB Resume Timeout =3D 3
> 15:17:00:650 HCIVSSetSleepModeParam(mode=3D5, timeout=3D3000ms): bResult=
=3D1
> 15:17:00:665 BRCM_PostLoad : RadioInitConfigureAudio set, configuring
> 2045 audio
> 15:17:00:686 HCIVSWriteSCOPCMIntParameters(0,2,0,0,0) : bResult=3D1
> 15:17:00:705 HCIVSWritePCMDataFormatParameters(0,0,2,3,1) : bResult=3D1
> 15:17:00:721 HCIVSWriteSCOTimeSlot(SCO Time Slot=3D0)
> 15:17:00:741 HCIVSWriteSCOTimeSlot : bResult=3D1
> 15:17:00:754 BRCM_PostLoad : RadioInitEnableCoexistence set, configuring
> 2045 BT/WLAN coexistence
> 15:17:01:774 HCIVSWriteCollaborationMode(1,1,0xcb7fbdb0,10) : bResult=3D1
> 15:17:01:787 BRCM_PostLoad END
> 15:17:01:801 RadioInitPostLoad End