From: Luiz Augusto von Dentz <[email protected]>
When toggling experimental features it may cause the old value to still
be in effect since it was read after read info which upon completion
would attempt to call adapter_register without first updating the
experimental features which could affect the likes of advertising
instances when LL Privacy is enabled.
---
src/adapter.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/src/adapter.c b/src/adapter.c
index 2175120f4..84bc5a1b0 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -9253,14 +9253,15 @@ static void set_exp_debug_complete(uint8_t status, uint16_t len,
static void exp_debug_func(struct btd_adapter *adapter, uint32_t flags)
{
struct mgmt_cp_set_exp_feature cp;
+ uint8_t action = btd_opts.experimental ? 0x01 : 0x00;
- /* If already enabled don't attempt to set it again */
- if (flags & BIT(0))
+ /* If already set don't attempt to set it again */
+ if (action == (flags & BIT(0)))
return;
memset(&cp, 0, sizeof(cp));
memcpy(cp.uuid, debug_uuid, 16);
- cp.action = 0x01;
+ cp.action = btd_opts.experimental ? 0x01 : 0x00;
if (mgmt_send(adapter->mgmt, MGMT_OP_SET_EXP_FEATURE,
adapter->dev_id, sizeof(cp), &cp,
@@ -9289,14 +9290,15 @@ static void set_rpa_resolution_complete(uint8_t status, uint16_t len,
static void rpa_resolution_func(struct btd_adapter *adapter, uint32_t flags)
{
struct mgmt_cp_set_exp_feature cp;
+ uint8_t action = btd_opts.experimental ? 0x01 : 0x00;
- /* If already enabled don't attempt to set it again */
- if (flags & BIT(0))
+ /* If already set don't attempt to set it again */
+ if (action == (flags & BIT(0)))
return;
memset(&cp, 0, sizeof(cp));
memcpy(cp.uuid, rpa_resolution_uuid, 16);
- cp.action = 0x01;
+ cp.action = action;
if (mgmt_send(adapter->mgmt, MGMT_OP_SET_EXP_FEATURE,
adapter->dev_id, sizeof(cp), &cp,
@@ -9480,10 +9482,6 @@ static void read_info_complete(uint8_t status, uint16_t length,
(missing_settings & MGMT_SETTING_FAST_CONNECTABLE))
set_mode(adapter, MGMT_OP_SET_FAST_CONNECTABLE, 0x01);
- if (btd_opts.experimental &&
- btd_has_kernel_features(KERNEL_EXP_FEATURES))
- read_exp_features(adapter);
-
err = adapter_register(adapter);
if (err < 0) {
btd_error(adapter->dev_id, "Unable to register new adapter");
@@ -9707,6 +9705,9 @@ static void index_added(uint16_t index, uint16_t length, const void *param,
return;
}
+ if (btd_has_kernel_features(KERNEL_EXP_FEATURES))
+ read_exp_features(adapter);
+
/*
* Protect against potential two executions of read controller info.
*
--
2.31.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=506771
---Test result---
Test Summary:
CheckPatch PASS 0.41 seconds
GitLint PASS 0.11 seconds
Prep - Setup ELL PASS 43.31 seconds
Build - Prep PASS 0.14 seconds
Build - Configure PASS 7.61 seconds
Build - Make PASS 188.57 seconds
Make Check PASS 8.56 seconds
Make Distcheck PASS 222.79 seconds
Build w/ext ELL - Configure PASS 7.66 seconds
Build w/ext ELL - Make PASS 177.18 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
Hi,
On Thu, Jun 24, 2021 at 3:36 PM <[email protected]> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=506771
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.41 seconds
> GitLint PASS 0.11 seconds
> Prep - Setup ELL PASS 43.31 seconds
> Build - Prep PASS 0.14 seconds
> Build - Configure PASS 7.61 seconds
> Build - Make PASS 188.57 seconds
> Make Check PASS 8.56 seconds
> Make Distcheck PASS 222.79 seconds
> Build w/ext ELL - Configure PASS 7.66 seconds
> Build w/ext ELL - Make PASS 177.18 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Distcheck - PASS
> Desc: Run distcheck to check the distribution
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
>
>
>
> ---
> Regards,
> Linux Bluetooth
Pushed.
--
Luiz Augusto von Dentz