Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since
they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code
"UNKNOWN HCI COMMAND" as shown below:
[ 580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2
[ 580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38
Signed-off-by: Zijun Hu <[email protected]>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 06a854a2507e..a33f8705f147 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3340,6 +3340,8 @@ static int btusb_setup_qca(struct hci_dev *hdev)
*/
set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
+ set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+
return 0;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=632528
---Test result---
Test Summary:
CheckPatch PASS 1.55 seconds
GitLint PASS 0.99 seconds
SubjectPrefix PASS 0.91 seconds
BuildKernel PASS 31.07 seconds
BuildKernel32 PASS 27.41 seconds
Incremental Build with patchesPASS 37.28 seconds
TestRunner: Setup PASS 457.68 seconds
TestRunner: l2cap-tester PASS 15.67 seconds
TestRunner: bnep-tester PASS 6.05 seconds
TestRunner: mgmt-tester PASS 101.07 seconds
TestRunner: rfcomm-tester PASS 7.73 seconds
TestRunner: sco-tester PASS 7.54 seconds
TestRunner: smp-tester PASS 7.49 seconds
TestRunner: userchan-tester PASS 6.22 seconds
---
Regards,
Linux Bluetooth
Hi Zijun,
> Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since
> they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code
> "UNKNOWN HCI COMMAND" as shown below:
>
> [ 580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2
> [ 580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38
>
> Signed-off-by: Zijun Hu <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 06a854a2507e..a33f8705f147 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3340,6 +3340,8 @@ static int btusb_setup_qca(struct hci_dev *hdev)
> */
> set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
>
> + set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
> +
> return 0;
> }
please include the supported commands output from btmon that indicates that this hardware declares support for this command.
Regards
Marcel
On 4/22/2022 5:17 PM, Marcel Holtmann wrote:
> Hi Zijun,
>
>> Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since
>> they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code
>> "UNKNOWN HCI COMMAND" as shown below:
>>
>> [ 580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2
>> [ 580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38
>>
>> Signed-off-by: Zijun Hu <[email protected]>
>> ---
>> drivers/bluetooth/btusb.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index 06a854a2507e..a33f8705f147 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -3340,6 +3340,8 @@ static int btusb_setup_qca(struct hci_dev *hdev)
>> */
>> set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
>>
>> + set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
>> +
>> return 0;
>> }
>
> please include the supported commands output from btmon that indicates that this hardware declares support for this command.
>
hcitool -i hci0 cmd 0x04 0x02
< HCI Command: ogf 0x04, ocf 0x0002, plen 0
> HCI Event: 0x0e plen 68
01 02 10 00 FF FF FB 03 CE FF EF FF FF FF FF 1F F2 0F E8 FE
3F F7 8F FF 1C 00 04 00 61 FF FF FF 7F BE 20 F5 FF F0 FF FF
FF FF FF FF FF EF FF FF FF FF 03 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
btmon output:
< HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 5.414488
> HCI Event: Command Complete (0x0e) plen 68 5.419751
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 288 entries
Inquiry (Octet 0 - Bit 0)
Inquiry Cancel (Octet 0 - Bit 1)
Periodic Inquiry Mode (Octet 0 - Bit 2)
Exit Periodic Inquiry Mode (Octet 0 - Bit 3)
Create Connection (Octet 0 - Bit 4)
Disconnect (Octet 0 - Bit 5)
Add SCO Connection (Octet 0 - Bit 6)
Create Connection Cancel (Octet 0 - Bit 7)
Accept Connection Request (Octet 1 - Bit 0)
Reject Connection Request (Octet 1 - Bit 1)
Link Key Request Reply (Octet 1 - Bit 2)
Link Key Request Negative Reply (Octet 1 - Bit 3)
PIN Code Request Reply (Octet 1 - Bit 4)
PIN Code Request Negative Reply (Octet 1 - Bit 5)
Change Connection Packet Type (Octet 1 - Bit 6)
Authentication Requested (Octet 1 - Bit 7)
Set Connection Encryption (Octet 2 - Bit 0)
Change Connection Link Key (Octet 2 - Bit 1)
Remote Name Request (Octet 2 - Bit 3)
Remote Name Request Cancel (Octet 2 - Bit 4)
Read Remote Supported Features (Octet 2 - Bit 5)
Read Remote Extended Features (Octet 2 - Bit 6)
Read Remote Version Information (Octet 2 - Bit 7)
Read Clock Offset (Octet 3 - Bit 0)
Read LMP Handle (Octet 3 - Bit 1)
Hold Mode (Octet 4 - Bit 1)
Sniff Mode (Octet 4 - Bit 2)
Exit Sniff Mode (Octet 4 - Bit 3)
QoS Setup (Octet 4 - Bit 6)
Role Discovery (Octet 4 - Bit 7)
Switch Role (Octet 5 - Bit 0)
Read Link Policy Settings (Octet 5 - Bit 1)
Write Link Policy Settings (Octet 5 - Bit 2)
Read Default Link Policy Settings (Octet 5 - Bit 3)
Write Default Link Policy Settings (Octet 5 - Bit 4)
Flow Specification (Octet 5 - Bit 5)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Set Event Filter (Octet 6 - Bit 0)
Flush (Octet 6 - Bit 1)
Read PIN Type (Octet 6 - Bit 2)
Write PIN Type (Octet 6 - Bit 3)
Read Stored Link Key (Octet 6 - Bit 5)
Write Stored Link Key (Octet 6 - Bit 6)
Delete Stored Link Key (Octet 6 - Bit 7)
Write Local Name (Octet 7 - Bit 0)
Read Local Name (Octet 7 - Bit 1)
Read Connection Accept Timeout (Octet 7 - Bit 2)
Write Connection Accept Timeout (Octet 7 - Bit 3)
Read Page Timeout (Octet 7 - Bit 4)
Write Page Timeout (Octet 7 - Bit 5)
Read Scan Enable (Octet 7 - Bit 6)
Write Scan Enable (Octet 7 - Bit 7)
Read Page Scan Activity (Octet 8 - Bit 0)
Write Page Scan Activity (Octet 8 - Bit 1)
Read Inquiry Scan Activity (Octet 8 - Bit 2)
Write Inquiry Scan Activity (Octet 8 - Bit 3)
Read Authentication Enable (Octet 8 - Bit 4)
Write Authentication Enable (Octet 8 - Bit 5)
Read Encryption Mode (Octet 8 - Bit 6)
Write Encryption Mode (Octet 8 - Bit 7)
Read Class of Device (Octet 9 - Bit 0)
Write Class of Device (Octet 9 - Bit 1)
Read Voice Setting (Octet 9 - Bit 2)
Write Voice Setting (Octet 9 - Bit 3)
Read Automatic Flush Timeout (Octet 9 - Bit 4)
Write Automatic Flush Timeout (Octet 9 - Bit 5)
Read Num Broadcast Retransmissions (Octet 9 - Bit 6)
Write Num Broadcast Retransmissions (Octet 9 - Bit 7)
Read Hold Mode Activity (Octet 10 - Bit 0)
Write Hold Mode Activity (Octet 10 - Bit 1)
Read Transmit Power Level (Octet 10 - Bit 2)
Read Sync Flow Control Enable (Octet 10 - Bit 3)
Write Sync Flow Control Enable (Octet 10 - Bit 4)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Link Supervision Timeout (Octet 11 - Bit 0)
Write Link Supervision Timeout (Octet 11 - Bit 1)
Read Number of Supported IAC (Octet 11 - Bit 2)
Read Current IAC LAP (Octet 11 - Bit 3)
Write Current IAC LAP (Octet 11 - Bit 4)
Set AFH Host Channel Classification (Octet 12 - Bit 1)
Read Inquiry Scan Type (Octet 12 - Bit 4)
Write Inquiry Scan Type (Octet 12 - Bit 5)
Read Inquiry Mode (Octet 12 - Bit 6)
Write Inquiry Mode (Octet 12 - Bit 7)
Read Page Scan Type (Octet 13 - Bit 0)
Write Page Scan Type (Octet 13 - Bit 1)
Read AFH Channel Assessment Mode (Octet 13 - Bit 2)
Write AFH Channel Assessment Mode (Octet 13 - Bit 3)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read Local Extended Features (Octet 14 - Bit 6)
Read Buffer Size (Octet 14 - Bit 7)
Read BD ADDR (Octet 15 - Bit 1)
Read Failed Contact Counter (Octet 15 - Bit 2)
Reset Failed Contact Counter (Octet 15 - Bit 3)
Read Link Quality (Octet 15 - Bit 4)
Read RSSI (Octet 15 - Bit 5)
Read AFH Channel Map (Octet 15 - Bit 6)
Read Clock (Octet 15 - Bit 7)
Read Loopback Mode (Octet 16 - Bit 0)
Write Loopback Mode (Octet 16 - Bit 1)
Enable Device Under Test Mode (Octet 16 - Bit 2)
Setup Synchronous Connection (Octet 16 - Bit 3)
Accept Synchronous Connection Request (Octet 16 - Bit 4)
Reject Synchronous Connection Request (Octet 16 - Bit 5)
Read Extended Inquiry Response (Octet 17 - Bit 0)
Write Extended Inquiry Response (Octet 17 - Bit 1)
Refresh Encryption Key (Octet 17 - Bit 2)
Sniff Subrating (Octet 17 - Bit 4)
Read Simple Pairing Mode (Octet 17 - Bit 5)
Write Simple Pairing Mode (Octet 17 - Bit 6)
Read Local OOB Data (Octet 17 - Bit 7)
Read Inquiry Response TX Power Level (Octet 18 - Bit 0)
Write Inquiry Transmit Power Level (Octet 18 - Bit 1)
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
IO Capability Request Reply (Octet 18 - Bit 7)
User Confirmation Request Reply (Octet 19 - Bit 0)
User Confirmation Request Neg Reply (Octet 19 - Bit 1)
User Passkey Request Reply (Octet 19 - Bit 2)
User Passkey Request Negative Reply (Octet 19 - Bit 3)
Remote OOB Data Request Reply (Octet 19 - Bit 4)
Write Simple Pairing Debug Mode (Octet 19 - Bit 5)
Enhanced Flush (Octet 19 - Bit 6)
Remote OOB Data Request Neg Reply (Octet 19 - Bit 7)
Send Keypress Notification (Octet 20 - Bit 2)
IO Capability Request Negative Reply (Octet 20 - Bit 3)
Read Encryption Key Size (Octet 20 - Bit 4)
Set Event Mask Page 2 (Octet 22 - Bit 2)
Read Enhanced Transmit Power Level (Octet 24 - Bit 0)
Read LE Host Supported (Octet 24 - Bit 5)
Write LE Host Supported (Octet 24 - Bit 6)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
Octet 25 - Bit 3
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
LE Receiver Test (Octet 28 - Bit 4)
LE Transmitter Test (Octet 28 - Bit 5)
LE Test End (Octet 28 - Bit 6)
Octet 29 - Bit 1
Octet 29 - Bit 2
Enhanced Setup Synchronous Connection (Octet 29 - Bit 3)
Enhanced Accept Synchronous Connection Request (Octet 29 - Bit 4)
Read Local Supported Codecs (Octet 29 - Bit 5)
Set External Frame Configuration (Octet 29 - Bit 7)
Set Triggered Clock Capture (Octet 30 - Bit 5)
Set Connectionless Slave Broadcast (Octet 31 - Bit 0)
Start Synchronization Train (Octet 31 - Bit 2)
Set Reserved LT_ADDR (Octet 31 - Bit 4)
Delete Reserved LT_ADDR (Octet 31 - Bit 5)
Set Connectionless Slave Broadcast Data (Octet 31 - Bit 6)
Read Synchronization Train Parameters (Octet 31 - Bit 7)
Write Synchronization Train Parameters (Octet 32 - Bit 0)
Remote OOB Extended Data Request Reply (Octet 32 - Bit 1)
Read Secure Connections Host Support (Octet 32 - Bit 2)
Write Secure Connections Host Support (Octet 32 - Bit 3)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
Read Local OOB Extended Data (Octet 32 - Bit 6)
Write Secure Connections Test Mode (Octet 32 - Bit 7)
LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Read Local P-256 Public Key (Octet 34 - Bit 1)
LE Generate DHKey (Octet 34 - Bit 2)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Read Peer Resolvable Address (Octet 34 - Bit 7)
LE Read Local Resolvable Address (Octet 35 - Bit 0)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
Octet 35 - Bit 4
Octet 35 - Bit 5
Octet 35 - Bit 6
Octet 35 - Bit 7
Octet 36 - Bit 0
Octet 36 - Bit 1
Octet 36 - Bit 2
Octet 36 - Bit 3
Octet 36 - Bit 4
Octet 36 - Bit 5
Octet 36 - Bit 6
Octet 36 - Bit 7
Octet 37 - Bit 0
Octet 37 - Bit 1
Octet 37 - Bit 2
Octet 37 - Bit 3
Octet 37 - Bit 4
Octet 37 - Bit 5
Octet 37 - Bit 6
Octet 37 - Bit 7
Octet 38 - Bit 0
Octet 38 - Bit 1
Octet 38 - Bit 2
Octet 38 - Bit 3
Octet 38 - Bit 4
Octet 38 - Bit 5
Octet 38 - Bit 6
Octet 38 - Bit 7
Octet 39 - Bit 0
Octet 39 - Bit 1
Octet 39 - Bit 2
Octet 39 - Bit 3
Octet 39 - Bit 4
Octet 39 - Bit 5
Octet 39 - Bit 6
Octet 39 - Bit 7
Octet 40 - Bit 0
Octet 40 - Bit 1
Octet 40 - Bit 2
Octet 40 - Bit 3
Octet 40 - Bit 4
Octet 40 - Bit 5
Octet 40 - Bit 6
Octet 40 - Bit 7
Octet 41 - Bit 0
Octet 41 - Bit 1
Octet 41 - Bit 2
Octet 41 - Bit 3
Octet 41 - Bit 5
Octet 41 - Bit 6
Octet 41 - Bit 7
Octet 42 - Bit 0
Octet 42 - Bit 1
Octet 42 - Bit 2
Octet 42 - Bit 3
Octet 42 - Bit 4
Octet 42 - Bit 5
Octet 42 - Bit 6
Octet 42 - Bit 7
Octet 43 - Bit 0
Octet 43 - Bit 1
Octet 43 - Bit 2
Octet 43 - Bit 3
Octet 43 - Bit 4
Octet 43 - Bit 5
Octet 43 - Bit 6
Octet 43 - Bit 7
Octet 44 - Bit 0
Octet 44 - Bit 1
Octet 44 - Bit 2
Octet 44 - Bit 3
Octet 44 - Bit 4
Octet 44 - Bit 5
Octet 44 - Bit 6
Octet 44 - Bit 7
Octet 45 - Bit 0
Octet 45 - Bit 1
Octet 45 - Bit 2
Octet 45 - Bit 3
Octet 45 - Bit 4
Octet 45 - Bit 5
Octet 45 - Bit 6
Octet 45 - Bit 7
Octet 46 - Bit 0
Octet 46 - Bit 1
> Regards
>
> Marcel
>
On 4/27/2022 2:14 AM, Marcel Holtmann wrote:
> Hi,
>
>>>> Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA controllers since
>>>> they answer HCI_OP_READ_DEF_ERR_DATA_REPORTING with error code
>>>> "UNKNOWN HCI COMMAND" as shown below:
>>>>
>>>> [ 580.517552] Bluetooth: hci0: unexpected cc 0x0c5a length: 1 < 2
>>>> [ 580.517660] Bluetooth: hci0: Opcode 0x c5a failed: -38
>>>>
>>>> Signed-off-by: Zijun Hu <[email protected]>
>>>> ---
>>>> drivers/bluetooth/btusb.c | 2 ++
>>>> 1 file changed, 2 insertions(+)
>>>>
>>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>>>> index 06a854a2507e..a33f8705f147 100644
>>>> --- a/drivers/bluetooth/btusb.c
>>>> +++ b/drivers/bluetooth/btusb.c
>>>> @@ -3340,6 +3340,8 @@ static int btusb_setup_qca(struct hci_dev *hdev)
>>>> */
>>>> set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
>>>>
>>>> + set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
>>>> +
>>>> return 0;
>>>> }
>>>
>>> please include the supported commands output from btmon that indicates that this hardware declares support for this command.
>>>
>> hcitool -i hci0 cmd 0x04 0x02
>> < HCI Command: ogf 0x04, ocf 0x0002, plen 0
>>> HCI Event: 0x0e plen 68
>> 01 02 10 00 FF FF FB 03 CE FF EF FF FF FF FF 1F F2 0F E8 FE
>> 3F F7 8F FF 1C 00 04 00 61 FF FF FF 7F BE 20 F5 FF F0 FF FF
>> FF FF FF FF FF EF FF FF FF FF 03 00 00 00 00 00 00 00 00 00
>> 00 00 00 00 00 00 00 00
>>
>> btmon output:
>> < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 5.414488
>>> HCI Event: Command Complete (0x0e) plen 68 5.419751
>> Read Local Supported Commands (0x04|0x0002) ncmd 1
>> Status: Success (0x00)
>> Commands: 288 entries
>> Inquiry (Octet 0 - Bit 0)
>> Inquiry Cancel (Octet 0 - Bit 1)
>> Periodic Inquiry Mode (Octet 0 - Bit 2)
>> Exit Periodic Inquiry Mode (Octet 0 - Bit 3)
>> Create Connection (Octet 0 - Bit 4)
>> Disconnect (Octet 0 - Bit 5)
>> Add SCO Connection (Octet 0 - Bit 6)
>> Create Connection Cancel (Octet 0 - Bit 7)
>> Accept Connection Request (Octet 1 - Bit 0)
>> Reject Connection Request (Octet 1 - Bit 1)
>> Link Key Request Reply (Octet 1 - Bit 2)
>> Link Key Request Negative Reply (Octet 1 - Bit 3)
>> PIN Code Request Reply (Octet 1 - Bit 4)
>> PIN Code Request Negative Reply (Octet 1 - Bit 5)
>> Change Connection Packet Type (Octet 1 - Bit 6)
>> Authentication Requested (Octet 1 - Bit 7)
>> Set Connection Encryption (Octet 2 - Bit 0)
>> Change Connection Link Key (Octet 2 - Bit 1)
>> Remote Name Request (Octet 2 - Bit 3)
>> Remote Name Request Cancel (Octet 2 - Bit 4)
>> Read Remote Supported Features (Octet 2 - Bit 5)
>> Read Remote Extended Features (Octet 2 - Bit 6)
>> Read Remote Version Information (Octet 2 - Bit 7)
>> Read Clock Offset (Octet 3 - Bit 0)
>> Read LMP Handle (Octet 3 - Bit 1)
>> Hold Mode (Octet 4 - Bit 1)
>> Sniff Mode (Octet 4 - Bit 2)
>> Exit Sniff Mode (Octet 4 - Bit 3)
>> QoS Setup (Octet 4 - Bit 6)
>> Role Discovery (Octet 4 - Bit 7)
>> Switch Role (Octet 5 - Bit 0)
>> Read Link Policy Settings (Octet 5 - Bit 1)
>> Write Link Policy Settings (Octet 5 - Bit 2)
>> Read Default Link Policy Settings (Octet 5 - Bit 3)
>> Write Default Link Policy Settings (Octet 5 - Bit 4)
>> Flow Specification (Octet 5 - Bit 5)
>> Set Event Mask (Octet 5 - Bit 6)
>> Reset (Octet 5 - Bit 7)
>> Set Event Filter (Octet 6 - Bit 0)
>> Flush (Octet 6 - Bit 1)
>> Read PIN Type (Octet 6 - Bit 2)
>> Write PIN Type (Octet 6 - Bit 3)
>> Read Stored Link Key (Octet 6 - Bit 5)
>> Write Stored Link Key (Octet 6 - Bit 6)
>> Delete Stored Link Key (Octet 6 - Bit 7)
>> Write Local Name (Octet 7 - Bit 0)
>> Read Local Name (Octet 7 - Bit 1)
>> Read Connection Accept Timeout (Octet 7 - Bit 2)
>> Write Connection Accept Timeout (Octet 7 - Bit 3)
>> Read Page Timeout (Octet 7 - Bit 4)
>> Write Page Timeout (Octet 7 - Bit 5)
>> Read Scan Enable (Octet 7 - Bit 6)
>> Write Scan Enable (Octet 7 - Bit 7)
>> Read Page Scan Activity (Octet 8 - Bit 0)
>> Write Page Scan Activity (Octet 8 - Bit 1)
>> Read Inquiry Scan Activity (Octet 8 - Bit 2)
>> Write Inquiry Scan Activity (Octet 8 - Bit 3)
>> Read Authentication Enable (Octet 8 - Bit 4)
>> Write Authentication Enable (Octet 8 - Bit 5)
>> Read Encryption Mode (Octet 8 - Bit 6)
>> Write Encryption Mode (Octet 8 - Bit 7)
>> Read Class of Device (Octet 9 - Bit 0)
>> Write Class of Device (Octet 9 - Bit 1)
>> Read Voice Setting (Octet 9 - Bit 2)
>> Write Voice Setting (Octet 9 - Bit 3)
>> Read Automatic Flush Timeout (Octet 9 - Bit 4)
>> Write Automatic Flush Timeout (Octet 9 - Bit 5)
>> Read Num Broadcast Retransmissions (Octet 9 - Bit 6)
>> Write Num Broadcast Retransmissions (Octet 9 - Bit 7)
>> Read Hold Mode Activity (Octet 10 - Bit 0)
>> Write Hold Mode Activity (Octet 10 - Bit 1)
>> Read Transmit Power Level (Octet 10 - Bit 2)
>> Read Sync Flow Control Enable (Octet 10 - Bit 3)
>> Write Sync Flow Control Enable (Octet 10 - Bit 4)
>> Set Controller To Host Flow Control (Octet 10 - Bit 5)
>> Host Buffer Size (Octet 10 - Bit 6)
>> Host Number of Completed Packets (Octet 10 - Bit 7)
>> Read Link Supervision Timeout (Octet 11 - Bit 0)
>> Write Link Supervision Timeout (Octet 11 - Bit 1)
>> Read Number of Supported IAC (Octet 11 - Bit 2)
>> Read Current IAC LAP (Octet 11 - Bit 3)
>> Write Current IAC LAP (Octet 11 - Bit 4)
>> Set AFH Host Channel Classification (Octet 12 - Bit 1)
>> Read Inquiry Scan Type (Octet 12 - Bit 4)
>> Write Inquiry Scan Type (Octet 12 - Bit 5)
>> Read Inquiry Mode (Octet 12 - Bit 6)
>> Write Inquiry Mode (Octet 12 - Bit 7)
>> Read Page Scan Type (Octet 13 - Bit 0)
>> Write Page Scan Type (Octet 13 - Bit 1)
>> Read AFH Channel Assessment Mode (Octet 13 - Bit 2)
>> Write AFH Channel Assessment Mode (Octet 13 - Bit 3)
>> Read Local Version Information (Octet 14 - Bit 3)
>> Read Local Supported Features (Octet 14 - Bit 5)
>> Read Local Extended Features (Octet 14 - Bit 6)
>> Read Buffer Size (Octet 14 - Bit 7)
>> Read BD ADDR (Octet 15 - Bit 1)
>> Read Failed Contact Counter (Octet 15 - Bit 2)
>> Reset Failed Contact Counter (Octet 15 - Bit 3)
>> Read Link Quality (Octet 15 - Bit 4)
>> Read RSSI (Octet 15 - Bit 5)
>> Read AFH Channel Map (Octet 15 - Bit 6)
>> Read Clock (Octet 15 - Bit 7)
>> Read Loopback Mode (Octet 16 - Bit 0)
>> Write Loopback Mode (Octet 16 - Bit 1)
>> Enable Device Under Test Mode (Octet 16 - Bit 2)
>> Setup Synchronous Connection (Octet 16 - Bit 3)
>> Accept Synchronous Connection Request (Octet 16 - Bit 4)
>> Reject Synchronous Connection Request (Octet 16 - Bit 5)
>> Read Extended Inquiry Response (Octet 17 - Bit 0)
>> Write Extended Inquiry Response (Octet 17 - Bit 1)
>> Refresh Encryption Key (Octet 17 - Bit 2)
>> Sniff Subrating (Octet 17 - Bit 4)
>> Read Simple Pairing Mode (Octet 17 - Bit 5)
>> Write Simple Pairing Mode (Octet 17 - Bit 6)
>> Read Local OOB Data (Octet 17 - Bit 7)
>> Read Inquiry Response TX Power Level (Octet 18 - Bit 0)
>> Write Inquiry Transmit Power Level (Octet 18 - Bit 1)
>> Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
>> Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
>> IO Capability Request Reply (Octet 18 - Bit 7)
>> User Confirmation Request Reply (Octet 19 - Bit 0)
>> User Confirmation Request Neg Reply (Octet 19 - Bit 1)
>> User Passkey Request Reply (Octet 19 - Bit 2)
>> User Passkey Request Negative Reply (Octet 19 - Bit 3)
>> Remote OOB Data Request Reply (Octet 19 - Bit 4)
>> Write Simple Pairing Debug Mode (Octet 19 - Bit 5)
>> Enhanced Flush (Octet 19 - Bit 6)
>> Remote OOB Data Request Neg Reply (Octet 19 - Bit 7)
>> Send Keypress Notification (Octet 20 - Bit 2)
>> IO Capability Request Negative Reply (Octet 20 - Bit 3)
>> Read Encryption Key Size (Octet 20 - Bit 4)
>> Set Event Mask Page 2 (Octet 22 - Bit 2)
>> Read Enhanced Transmit Power Level (Octet 24 - Bit 0)
>> Read LE Host Supported (Octet 24 - Bit 5)
>> Write LE Host Supported (Octet 24 - Bit 6)
>> LE Set Event Mask (Octet 25 - Bit 0)
>> LE Read Buffer Size (Octet 25 - Bit 1)
>> LE Read Local Supported Features (Octet 25 - Bit 2)
>> Octet 25 - Bit 3
>> LE Set Random Address (Octet 25 - Bit 4)
>> LE Set Advertising Parameters (Octet 25 - Bit 5)
>> LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
>> LE Set Advertising Data (Octet 25 - Bit 7)
>> LE Set Scan Response Data (Octet 26 - Bit 0)
>> LE Set Advertise Enable (Octet 26 - Bit 1)
>> LE Set Scan Parameters (Octet 26 - Bit 2)
>> LE Set Scan Enable (Octet 26 - Bit 3)
>> LE Create Connection (Octet 26 - Bit 4)
>> LE Create Connection Cancel (Octet 26 - Bit 5)
>> LE Read White List Size (Octet 26 - Bit 6)
>> LE Clear White List (Octet 26 - Bit 7)
>> LE Add Device To White List (Octet 27 - Bit 0)
>> LE Remove Device From White List (Octet 27 - Bit 1)
>> LE Connection Update (Octet 27 - Bit 2)
>> LE Set Host Channel Classification (Octet 27 - Bit 3)
>> LE Read Channel Map (Octet 27 - Bit 4)
>> LE Read Remote Used Features (Octet 27 - Bit 5)
>> LE Encrypt (Octet 27 - Bit 6)
>> LE Rand (Octet 27 - Bit 7)
>> LE Start Encryption (Octet 28 - Bit 0)
>> LE Long Term Key Request Reply (Octet 28 - Bit 1)
>> LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
>> LE Read Supported States (Octet 28 - Bit 3)
>> LE Receiver Test (Octet 28 - Bit 4)
>> LE Transmitter Test (Octet 28 - Bit 5)
>> LE Test End (Octet 28 - Bit 6)
>> Octet 29 - Bit 1
>> Octet 29 - Bit 2
>> Enhanced Setup Synchronous Connection (Octet 29 - Bit 3)
>> Enhanced Accept Synchronous Connection Request (Octet 29 - Bit 4)
>> Read Local Supported Codecs (Octet 29 - Bit 5)
>> Set External Frame Configuration (Octet 29 - Bit 7)
>> Set Triggered Clock Capture (Octet 30 - Bit 5)
>> Set Connectionless Slave Broadcast (Octet 31 - Bit 0)
>> Start Synchronization Train (Octet 31 - Bit 2)
>> Set Reserved LT_ADDR (Octet 31 - Bit 4)
>> Delete Reserved LT_ADDR (Octet 31 - Bit 5)
>> Set Connectionless Slave Broadcast Data (Octet 31 - Bit 6)
>> Read Synchronization Train Parameters (Octet 31 - Bit 7)
>> Write Synchronization Train Parameters (Octet 32 - Bit 0)
>> Remote OOB Extended Data Request Reply (Octet 32 - Bit 1)
>> Read Secure Connections Host Support (Octet 32 - Bit 2)
>> Write Secure Connections Host Support (Octet 32 - Bit 3)
>> Read Authenticated Payload Timeout (Octet 32 - Bit 4)
>> Write Authenticated Payload Timeout (Octet 32 - Bit 5)
>> Read Local OOB Extended Data (Octet 32 - Bit 6)
>> Write Secure Connections Test Mode (Octet 32 - Bit 7)
>> LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
>> LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
>> LE Set Data Length (Octet 33 - Bit 6)
>> LE Read Suggested Default Data Length (Octet 33 - Bit 7)
>> LE Write Suggested Default Data Length (Octet 34 - Bit 0)
>> LE Read Local P-256 Public Key (Octet 34 - Bit 1)
>> LE Generate DHKey (Octet 34 - Bit 2)
>> LE Add Device To Resolving List (Octet 34 - Bit 3)
>> LE Remove Device From Resolving List (Octet 34 - Bit 4)
>> LE Clear Resolving List (Octet 34 - Bit 5)
>> LE Read Resolving List Size (Octet 34 - Bit 6)
>> LE Read Peer Resolvable Address (Octet 34 - Bit 7)
>> LE Read Local Resolvable Address (Octet 35 - Bit 0)
>> LE Set Address Resolution Enable (Octet 35 - Bit 1)
>> LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
>> LE Read Maximum Data Length (Octet 35 - Bit 3)
>> Octet 35 - Bit 4
>> Octet 35 - Bit 5
>> Octet 35 - Bit 6
>> Octet 35 - Bit 7
>> Octet 36 - Bit 0
>> Octet 36 - Bit 1
>> Octet 36 - Bit 2
>> Octet 36 - Bit 3
>> Octet 36 - Bit 4
>> Octet 36 - Bit 5
>> Octet 36 - Bit 6
>> Octet 36 - Bit 7
>> Octet 37 - Bit 0
>> Octet 37 - Bit 1
>> Octet 37 - Bit 2
>> Octet 37 - Bit 3
>> Octet 37 - Bit 4
>> Octet 37 - Bit 5
>> Octet 37 - Bit 6
>> Octet 37 - Bit 7
>> Octet 38 - Bit 0
>> Octet 38 - Bit 1
>> Octet 38 - Bit 2
>> Octet 38 - Bit 3
>> Octet 38 - Bit 4
>> Octet 38 - Bit 5
>> Octet 38 - Bit 6
>> Octet 38 - Bit 7
>> Octet 39 - Bit 0
>> Octet 39 - Bit 1
>> Octet 39 - Bit 2
>> Octet 39 - Bit 3
>> Octet 39 - Bit 4
>> Octet 39 - Bit 5
>> Octet 39 - Bit 6
>> Octet 39 - Bit 7
>> Octet 40 - Bit 0
>> Octet 40 - Bit 1
>> Octet 40 - Bit 2
>> Octet 40 - Bit 3
>> Octet 40 - Bit 4
>> Octet 40 - Bit 5
>> Octet 40 - Bit 6
>> Octet 40 - Bit 7
>> Octet 41 - Bit 0
>> Octet 41 - Bit 1
>> Octet 41 - Bit 2
>> Octet 41 - Bit 3
>> Octet 41 - Bit 5
>> Octet 41 - Bit 6
>> Octet 41 - Bit 7
>> Octet 42 - Bit 0
>> Octet 42 - Bit 1
>> Octet 42 - Bit 2
>> Octet 42 - Bit 3
>> Octet 42 - Bit 4
>> Octet 42 - Bit 5
>> Octet 42 - Bit 6
>> Octet 42 - Bit 7
>> Octet 43 - Bit 0
>> Octet 43 - Bit 1
>> Octet 43 - Bit 2
>> Octet 43 - Bit 3
>> Octet 43 - Bit 4
>> Octet 43 - Bit 5
>> Octet 43 - Bit 6
>> Octet 43 - Bit 7
>> Octet 44 - Bit 0
>> Octet 44 - Bit 1
>> Octet 44 - Bit 2
>> Octet 44 - Bit 3
>> Octet 44 - Bit 4
>> Octet 44 - Bit 5
>> Octet 44 - Bit 6
>> Octet 44 - Bit 7
>> Octet 45 - Bit 0
>> Octet 45 - Bit 1
>> Octet 45 - Bit 2
>> Octet 45 - Bit 3
>> Octet 45 - Bit 4
>> Octet 45 - Bit 5
>> Octet 45 - Bit 6
>> Octet 45 - Bit 7
>> Octet 46 - Bit 0
>> Octet 46 - Bit 1
>
> you might want to use a recent btmon. However can you show how the Read Default Erroneous Data Reporting is failing? It sounds like this hardware is fundamentally broken.
>
# hcitool -i hci0 cmd 0x03 0x5a
< HCI Command: ogf 0x03, ocf 0x005a, plen 0
> HCI Event: 0x0e plen 4
01 5A 0C 01
btmon output:
@ RAW Open: hcitool (privileged) version 2.22 {0x0002} 331.950253
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 #1 331.950535
> HCI Event: Command Complete (0x0e) plen 4 #2 331.951421
Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
Status: Unknown HCI Command (0x01)
@ RAW Close: hcitool
> Regards
>
> Marcel
>