Hi, i'am try make working the bluez in a ARM platform but i've some
problems to recognize the usb adapter.
The message when i connect the device is:
[bash]# usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 4
usb 1-1: device not accepting address 4, error -110
usb 1-1: new full speed USB device using s3c2410-ohci and address 5
usb 1-1: device not accepting address 5, error -110
and when i execute the comand hcitool scan, i get that the device is
unavailable. I suspect that
the driver usb is not run correctly.
But when i connect other device like a pen-drive, the usb reconize normaly!
The ARM used is SBC2440II, the kernel version is 2.6.13 and the arm gcc is
3.4.1.
Any idea to how recognize the device?
Thanks in advance.
Andre Souza
Hi Andre,
On Thu, Jul 23, 2009 at 3:12 PM, <[email protected]> wrote:
>
> Hi, i'am try make working the bluez in a ARM platform but i've some
> problems to recognize the usb adapter.
>
> The message when i connect the device is:
>
> [bash]# usb 1-1: new full speed USB device using s3c2410-ohci and address 2
> usb 1-1: device descriptor read/64, error -110
> usb 1-1: device descriptor read/64, error -110
> usb 1-1: new full speed USB device using s3c2410-ohci and address 3
> usb 1-1: device descriptor read/64, error -110
> usb 1-1: device descriptor read/64, error -110
> usb 1-1: new full speed USB device using s3c2410-ohci and address 4
> usb 1-1: device not accepting address 4, error -110
> usb 1-1: new full speed USB device using s3c2410-ohci and address 5
> usb 1-1: device not accepting address 5, error -110
>
>
> and when i execute the comand hcitool scan, i get that the device is
> unavailable. I suspect that
> the driver usb is not run correctly.
> But when i connect other device like a pen-drive, the usb reconize normaly!
>
>
> The ARM used is SBC2440II, the kernel version is 2.6.13 and the arm gcc is
> 3.4.1.
Try run a kernel from upstream. ;-)
>
>
> Any idea to how recognize the device?
>
> Thanks in advance.
>
> Andre Souza
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
--
Gustavo F. Padovan
http://padovan.org