This will allow to set the LE PHY preferences for
a connected device.
Reviewed-by: Anupam Roy <[email protected]>
---
doc/device-api.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/doc/device-api.txt b/doc/device-api.txt
index 4e824d2de..d0e108f74 100644
--- a/doc/device-api.txt
+++ b/doc/device-api.txt
@@ -272,3 +272,25 @@ Properties string Address [readonly]
Example:
<Transport Discovery> <Organization Flags...>
0x26 0x01 0x01...
+
+ array{string} Phy [readwrite, optional]
+
+ PHY Preferences for a connected device.
+
+ Note: The controller might not be able to make the
+ change because of reasons like peer not supporting
+ the requested PHY or it couldnot schedule due to
+ other activites.
+
+ This is only available for LE capable controllers.
+ It will return Not Supported Otherwise.
+
+ Possible values:
+ "LE1MTX"
+ "LE1MRX"
+ "LE2MTX"
+ "LE2MRX"
+ "LECODEDTX"
+ "LECODEDRX"
+ "LECODEDS2"
+ "LECODEDS8"
--
2.17.1
Hi Ayush,
On Wed, Jul 21, 2021 at 11:03 PM Ayush Garg <[email protected]> wrote:
>
> This will allow to set the LE PHY preferences for
> a connected device.
>
> Reviewed-by: Anupam Roy <[email protected]>
> ---
> doc/device-api.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/doc/device-api.txt b/doc/device-api.txt
> index 4e824d2de..d0e108f74 100644
> --- a/doc/device-api.txt
> +++ b/doc/device-api.txt
> @@ -272,3 +272,25 @@ Properties string Address [readonly]
> Example:
> <Transport Discovery> <Organization Flags...>
> 0x26 0x01 0x01...
> +
> + array{string} Phy [readwrite, optional]
> +
> + PHY Preferences for a connected device.
> +
> + Note: The controller might not be able to make the
> + change because of reasons like peer not supporting
> + the requested PHY or it couldnot schedule due to
> + other activites.
> +
> + This is only available for LE capable controllers.
> + It will return Not Supported Otherwise.
The property shall be omitted if LE is not enabled, I guess that was
the intent of optional but saying it would return NotSupport means
otherwise.
> +
> + Possible values:
> + "LE1MTX"
> + "LE1MRX"
> + "LE2MTX"
> + "LE2MRX"
> + "LECODEDTX"
> + "LECODEDRX"
> + "LECODEDS2"
> + "LECODEDS8"
> --
> 2.17.1
I guess the intend here would be to have a prefered PHY for LE, but I
wonder if this would really help since different profiles/service may
have different preferences, also by being an array I assume one would
need to the enter in the preferred order which should probably be
stated and again depending on the use case this could be a config
setting in main.conf instead so it is applied globally to all devices
by drivers can overwrite it with their own preferences.
--
Luiz Augusto von Dentz