Can't seem to figure out why audio.a2dp.default.so isn't being built.
It seems almost like its not even trying to start bluetoothd. I
wrapped it with strace, and it didn't create a trace log.
On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
> Ok I added the additional kernel modules.
>
> Here is a logcat from boot to turning on bluetooth in the UI.
>
> For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
>
> Thanks,
> Keith
>
> On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
>> Hi Keith,
>>
>> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
>>> Actually I had tried through the UI first and got the above logcat
>>> messages. I then tried HAL test.
>>>
>>> Just for some additional background I'm running kernel 3.8.13 and
>>> bluetooth modules from backports-3.18.1-1
>>
>> If haltest is working that means kernel is configured properly.
>>
>>> I have them at the bottom of "on boot" in the init.rc. I have
>>> attached my kernel config and init.rc.
>>
>> Could you attach full logcat starting from boot?
>>
>> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
>> BT enable but is needed for music streaming over BT).
>>
>>>
>>> I noticed in the mako example the following additional modules are
>>> loaded, I'm guessing I should add them also?
>>> insmod /system/lib/modules/rfcomm.ko
>>> insmod /system/lib/modules/bnep.ko
>>
>> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
>> (BT tethering).
>>
>>>
>>> Thanks again for the help.
>>> Keith
>>>
>>
>> --
>> BR
>> Szymon Janc
>
>
>
> --
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Hi Keith,
On Friday 20 of February 2015 07:59:10 Keith Conger wrote:
> If I figure it out I'll let you know.
I've already pushed a patch that should fix installation path on KK.
> I'm also trying to figure out
> why audio.a2dp.default and audio.sco.default aren't being build
> automatically.
Those libs are optional so you need to add them to PRODUCT_PACKAGES for your device.
Check for reference (this is for mako (Nexus 4)):
https://code.google.com/p/aosp-bluez/source/browse/device.mk?repo=device-lge-mako#183
> Thanks again,
> Keith
>
> On Fri, Feb 20, 2015 at 3:05 AM, Szymon Janc <[email protected]> wrote:
> > Hi Keith,
> >
> > On Thursday 19 of February 2015 11:49:43 Keith Conger wrote:
> >> That did the trick! It appears bluetooth is now working! Thanks again
> >> for all your help and patience!
> >
> > I'm glad that it works for you, feel free to get back if you would have any problems.
> >
> > As for those libs being installed in /system/lib instead of /system/lib/hw it looks
> > like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly
> > installed in hw). I haven't tracked it why this happen yet.
> >
> >>
> >> Keith
> >>
> >> On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <[email protected]> wrote:
> >> > Sorry, I see the problem. ro.kernel.qemu is set to 1.
> >> >
> >> > I'm commenting out the check. And rebuilding.
> >> >
> >> > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <[email protected]> wrote:
> >> >> Interesting, do you happen to know what I need to change in the kernel?
> >> >>
> >> >> Thanks again!
> >> >> Keith
> >> >>
> >> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
> >> >>> Hi Keith,
> >> >>>
> >> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
> >> >>>> Thanks I'll try that, do you know which BoardConfig option triggers
> >> >>>> its build? Eventually I'd like to send my work in getting Bluez in the
> >> >>>> bbbandroid repo to its maintainer.
> >> >>>
> >> >>> I think the problem with bt working from haltest but not from java is that this
> >> >>> board of your is using kernel for emulator.
> >> >>>
> >> >>>
> >> >>> This is from your logcat:
> >> >>> I/SystemServer( 595): No Bluetooh Service (emulator)
> >> >>>
> >> >>> and check this for reference:
> >> >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
> >> >>>
> >> >>>>
> >> >>>> Thanks,
> >> >>>> Keith
> >
> >>
> >
> > --
> > Best regards,
> > Szymon Janc
>
>
>
>
--
Best regards,
Szymon Janc
If I figure it out I'll let you know. I'm also trying to figure out
why audio.a2dp.default and audio.sco.default aren't being build
automatically.
Thanks again,
Keith
On Fri, Feb 20, 2015 at 3:05 AM, Szymon Janc <[email protected]> wrote:
> Hi Keith,
>
> On Thursday 19 of February 2015 11:49:43 Keith Conger wrote:
>> That did the trick! It appears bluetooth is now working! Thanks again
>> for all your help and patience!
>
> I'm glad that it works for you, feel free to get back if you would have any problems.
>
> As for those libs being installed in /system/lib instead of /system/lib/hw it looks
> like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly
> installed in hw). I haven't tracked it why this happen yet.
>
>>
>> Keith
>>
>> On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <[email protected]> wrote:
>> > Sorry, I see the problem. ro.kernel.qemu is set to 1.
>> >
>> > I'm commenting out the check. And rebuilding.
>> >
>> > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <[email protected]> wrote:
>> >> Interesting, do you happen to know what I need to change in the kernel?
>> >>
>> >> Thanks again!
>> >> Keith
>> >>
>> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
>> >>> Hi Keith,
>> >>>
>> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
>> >>>> Thanks I'll try that, do you know which BoardConfig option triggers
>> >>>> its build? Eventually I'd like to send my work in getting Bluez in the
>> >>>> bbbandroid repo to its maintainer.
>> >>>
>> >>> I think the problem with bt working from haltest but not from java is that this
>> >>> board of your is using kernel for emulator.
>> >>>
>> >>>
>> >>> This is from your logcat:
>> >>> I/SystemServer( 595): No Bluetooh Service (emulator)
>> >>>
>> >>> and check this for reference:
>> >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
>> >>>
>> >>>>
>> >>>> Thanks,
>> >>>> Keith
>
>>
>
> --
> Best regards,
> Szymon Janc
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Hi Keith,
On Thursday 19 of February 2015 11:49:43 Keith Conger wrote:
> That did the trick! It appears bluetooth is now working! Thanks again
> for all your help and patience!
I'm glad that it works for you, feel free to get back if you would have any problems.
As for those libs being installed in /system/lib instead of /system/lib/hw it looks
like we have some bug (but it appears only on KitKat, on Lollipop libs are correctly
installed in hw). I haven't tracked it why this happen yet.
>
> Keith
>
> On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <[email protected]> wrote:
> > Sorry, I see the problem. ro.kernel.qemu is set to 1.
> >
> > I'm commenting out the check. And rebuilding.
> >
> > On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <[email protected]> wrote:
> >> Interesting, do you happen to know what I need to change in the kernel?
> >>
> >> Thanks again!
> >> Keith
> >>
> >> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
> >>> Hi Keith,
> >>>
> >>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
> >>>> Thanks I'll try that, do you know which BoardConfig option triggers
> >>>> its build? Eventually I'd like to send my work in getting Bluez in the
> >>>> bbbandroid repo to its maintainer.
> >>>
> >>> I think the problem with bt working from haltest but not from java is that this
> >>> board of your is using kernel for emulator.
> >>>
> >>>
> >>> This is from your logcat:
> >>> I/SystemServer( 595): No Bluetooh Service (emulator)
> >>>
> >>> and check this for reference:
> >>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
> >>>
> >>>>
> >>>> Thanks,
> >>>> Keith
>
--
Best regards,
Szymon Janc
That did the trick! It appears bluetooth is now working! Thanks again
for all your help and patience!
Keith
On Thu, Feb 19, 2015 at 10:25 AM, Keith Conger <[email protected]> wrote:
> Sorry, I see the problem. ro.kernel.qemu is set to 1.
>
> I'm commenting out the check. And rebuilding.
>
> On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <[email protected]> wrote:
>> Interesting, do you happen to know what I need to change in the kernel?
>>
>> Thanks again!
>> Keith
>>
>> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
>>> Hi Keith,
>>>
>>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
>>>> Thanks I'll try that, do you know which BoardConfig option triggers
>>>> its build? Eventually I'd like to send my work in getting Bluez in the
>>>> bbbandroid repo to its maintainer.
>>>
>>> I think the problem with bt working from haltest but not from java is that this
>>> board of your is using kernel for emulator.
>>>
>>>
>>> This is from your logcat:
>>> I/SystemServer( 595): No Bluetooh Service (emulator)
>>>
>>> and check this for reference:
>>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
>>>
>>>>
>>>> Thanks,
>>>> Keith
>>>>
>>>> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko
>>>> <[email protected]> wrote:
>>>> > Hi Keith,
>>>> >
>>>> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
>>>> >> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>>>> >>
>>>> >
>>>> > This depends on your Android board configuration.
>>>> >
>>>> > afaik you can still build it locally with "mm" and copy to target
>>>> >
>>>> > adb sync should be enough
>>>> >
>>>> > Best regards
>>>> > Andrei Emeltchenko
>>>> >
>>>> >
>>>> >> It seems almost like its not even trying to start bluetoothd. I
>>>> >> wrapped it with strace, and it didn't create a trace log.
>>>> >>
>>>> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
>>>> >> > Ok I added the additional kernel modules.
>>>> >> >
>>>> >> > Here is a logcat from boot to turning on bluetooth in the UI.
>>>> >> >
>>>> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
>>>> >> >
>>>> >> > Thanks,
>>>> >> > Keith
>>>> >> >
>>>> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
>>>> >> >> Hi Keith,
>>>> >> >>
>>>> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
>>>> >> >>> Actually I had tried through the UI first and got the above logcat
>>>> >> >>> messages. I then tried HAL test.
>>>> >> >>>
>>>> >> >>> Just for some additional background I'm running kernel 3.8.13 and
>>>> >> >>> bluetooth modules from backports-3.18.1-1
>>>> >> >>
>>>> >> >> If haltest is working that means kernel is configured properly.
>>>> >> >>
>>>> >> >>> I have them at the bottom of "on boot" in the init.rc. I have
>>>> >> >>> attached my kernel config and init.rc.
>>>> >> >>
>>>> >> >> Could you attach full logcat starting from boot?
>>>> >> >>
>>>> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
>>>> >> >> BT enable but is needed for music streaming over BT).
>>>> >> >>
>>>> >> >>>
>>>> >> >>> I noticed in the mako example the following additional modules are
>>>> >> >>> loaded, I'm guessing I should add them also?
>>>> >> >>> insmod /system/lib/modules/rfcomm.ko
>>>> >> >>> insmod /system/lib/modules/bnep.ko
>>>> >> >>
>>>> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
>>>> >> >> (BT tethering).
>>>> >> >>
>>>> >> >>>
>>>> >> >>> Thanks again for the help.
>>>> >> >>> Keith
>>>> >> >>>
>>>> >> >>
>>>> >> >> --
>>>> >> >> BR
>>>> >> >> Szymon Janc
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >> > --
>>>> >> > Keith Conger
>>>> >> > keith DOT conger AT gmail DOT com
>>>> >> > http://thecongers.org
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Keith Conger
>>>> >> keith DOT conger AT gmail DOT com
>>>> >> http://thecongers.org
>>>> >> --
>>>> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
>>>> >> the body of a message to [email protected]
>>>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> Best regards,
>>> Szymon Janc
>>
>>
>>
>> --
>> Keith Conger
>> keith DOT conger AT gmail DOT com
>> http://thecongers.org
>
>
>
> --
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Sorry, I see the problem. ro.kernel.qemu is set to 1.
I'm commenting out the check. And rebuilding.
On Thu, Feb 19, 2015 at 9:31 AM, Keith Conger <[email protected]> wrote:
> Interesting, do you happen to know what I need to change in the kernel?
>
> Thanks again!
> Keith
>
> On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
>> Hi Keith,
>>
>> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
>>> Thanks I'll try that, do you know which BoardConfig option triggers
>>> its build? Eventually I'd like to send my work in getting Bluez in the
>>> bbbandroid repo to its maintainer.
>>
>> I think the problem with bt working from haltest but not from java is that this
>> board of your is using kernel for emulator.
>>
>>
>> This is from your logcat:
>> I/SystemServer( 595): No Bluetooh Service (emulator)
>>
>> and check this for reference:
>> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
>>
>>>
>>> Thanks,
>>> Keith
>>>
>>> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko
>>> <[email protected]> wrote:
>>> > Hi Keith,
>>> >
>>> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
>>> >> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>>> >>
>>> >
>>> > This depends on your Android board configuration.
>>> >
>>> > afaik you can still build it locally with "mm" and copy to target
>>> >
>>> > adb sync should be enough
>>> >
>>> > Best regards
>>> > Andrei Emeltchenko
>>> >
>>> >
>>> >> It seems almost like its not even trying to start bluetoothd. I
>>> >> wrapped it with strace, and it didn't create a trace log.
>>> >>
>>> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
>>> >> > Ok I added the additional kernel modules.
>>> >> >
>>> >> > Here is a logcat from boot to turning on bluetooth in the UI.
>>> >> >
>>> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
>>> >> >
>>> >> > Thanks,
>>> >> > Keith
>>> >> >
>>> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
>>> >> >> Hi Keith,
>>> >> >>
>>> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
>>> >> >>> Actually I had tried through the UI first and got the above logcat
>>> >> >>> messages. I then tried HAL test.
>>> >> >>>
>>> >> >>> Just for some additional background I'm running kernel 3.8.13 and
>>> >> >>> bluetooth modules from backports-3.18.1-1
>>> >> >>
>>> >> >> If haltest is working that means kernel is configured properly.
>>> >> >>
>>> >> >>> I have them at the bottom of "on boot" in the init.rc. I have
>>> >> >>> attached my kernel config and init.rc.
>>> >> >>
>>> >> >> Could you attach full logcat starting from boot?
>>> >> >>
>>> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
>>> >> >> BT enable but is needed for music streaming over BT).
>>> >> >>
>>> >> >>>
>>> >> >>> I noticed in the mako example the following additional modules are
>>> >> >>> loaded, I'm guessing I should add them also?
>>> >> >>> insmod /system/lib/modules/rfcomm.ko
>>> >> >>> insmod /system/lib/modules/bnep.ko
>>> >> >>
>>> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
>>> >> >> (BT tethering).
>>> >> >>
>>> >> >>>
>>> >> >>> Thanks again for the help.
>>> >> >>> Keith
>>> >> >>>
>>> >> >>
>>> >> >> --
>>> >> >> BR
>>> >> >> Szymon Janc
>>> >> >
>>> >> >
>>> >> >
>>> >> > --
>>> >> > Keith Conger
>>> >> > keith DOT conger AT gmail DOT com
>>> >> > http://thecongers.org
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Keith Conger
>>> >> keith DOT conger AT gmail DOT com
>>> >> http://thecongers.org
>>> >> --
>>> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
>>> >> the body of a message to [email protected]
>>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>>>
>>
>> --
>> Best regards,
>> Szymon Janc
>
>
>
> --
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Interesting, do you happen to know what I need to change in the kernel?
Thanks again!
Keith
On Thu, Feb 19, 2015 at 9:08 AM, Szymon Janc <[email protected]> wrote:
> Hi Keith,
>
> On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
>> Thanks I'll try that, do you know which BoardConfig option triggers
>> its build? Eventually I'd like to send my work in getting Bluez in the
>> bbbandroid repo to its maintainer.
>
> I think the problem with bt working from haltest but not from java is that this
> board of your is using kernel for emulator.
>
>
> This is from your logcat:
> I/SystemServer( 595): No Bluetooh Service (emulator)
>
> and check this for reference:
> http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
>
>>
>> Thanks,
>> Keith
>>
>> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko
>> <[email protected]> wrote:
>> > Hi Keith,
>> >
>> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
>> >> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>> >>
>> >
>> > This depends on your Android board configuration.
>> >
>> > afaik you can still build it locally with "mm" and copy to target
>> >
>> > adb sync should be enough
>> >
>> > Best regards
>> > Andrei Emeltchenko
>> >
>> >
>> >> It seems almost like its not even trying to start bluetoothd. I
>> >> wrapped it with strace, and it didn't create a trace log.
>> >>
>> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
>> >> > Ok I added the additional kernel modules.
>> >> >
>> >> > Here is a logcat from boot to turning on bluetooth in the UI.
>> >> >
>> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
>> >> >
>> >> > Thanks,
>> >> > Keith
>> >> >
>> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
>> >> >> Hi Keith,
>> >> >>
>> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
>> >> >>> Actually I had tried through the UI first and got the above logcat
>> >> >>> messages. I then tried HAL test.
>> >> >>>
>> >> >>> Just for some additional background I'm running kernel 3.8.13 and
>> >> >>> bluetooth modules from backports-3.18.1-1
>> >> >>
>> >> >> If haltest is working that means kernel is configured properly.
>> >> >>
>> >> >>> I have them at the bottom of "on boot" in the init.rc. I have
>> >> >>> attached my kernel config and init.rc.
>> >> >>
>> >> >> Could you attach full logcat starting from boot?
>> >> >>
>> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
>> >> >> BT enable but is needed for music streaming over BT).
>> >> >>
>> >> >>>
>> >> >>> I noticed in the mako example the following additional modules are
>> >> >>> loaded, I'm guessing I should add them also?
>> >> >>> insmod /system/lib/modules/rfcomm.ko
>> >> >>> insmod /system/lib/modules/bnep.ko
>> >> >>
>> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
>> >> >> (BT tethering).
>> >> >>
>> >> >>>
>> >> >>> Thanks again for the help.
>> >> >>> Keith
>> >> >>>
>> >> >>
>> >> >> --
>> >> >> BR
>> >> >> Szymon Janc
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > Keith Conger
>> >> > keith DOT conger AT gmail DOT com
>> >> > http://thecongers.org
>> >>
>> >>
>> >>
>> >> --
>> >> Keith Conger
>> >> keith DOT conger AT gmail DOT com
>> >> http://thecongers.org
>> >> --
>> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
>> >> the body of a message to [email protected]
>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>>
>>
>
> --
> Best regards,
> Szymon Janc
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Hi Keith,
On Thursday 19 of February 2015 09:06:01 Keith Conger wrote:
> Thanks I'll try that, do you know which BoardConfig option triggers
> its build? Eventually I'd like to send my work in getting Bluez in the
> bbbandroid repo to its maintainer.
I think the problem with bt working from haltest but not from java is that this
board of your is using kernel for emulator.
This is from your logcat:
I/SystemServer( 595): No Bluetooh Service (emulator)
and check this for reference:
http://androidxref.com/5.0.0_r2/xref/frameworks/base/services/java/com/android/server/SystemServer.java#487
>
> Thanks,
> Keith
>
> On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko
> <[email protected]> wrote:
> > Hi Keith,
> >
> > On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
> >> Can't seem to figure out why audio.a2dp.default.so isn't being built.
> >>
> >
> > This depends on your Android board configuration.
> >
> > afaik you can still build it locally with "mm" and copy to target
> >
> > adb sync should be enough
> >
> > Best regards
> > Andrei Emeltchenko
> >
> >
> >> It seems almost like its not even trying to start bluetoothd. I
> >> wrapped it with strace, and it didn't create a trace log.
> >>
> >> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
> >> > Ok I added the additional kernel modules.
> >> >
> >> > Here is a logcat from boot to turning on bluetooth in the UI.
> >> >
> >> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
> >> >
> >> > Thanks,
> >> > Keith
> >> >
> >> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
> >> >> Hi Keith,
> >> >>
> >> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
> >> >>> Actually I had tried through the UI first and got the above logcat
> >> >>> messages. I then tried HAL test.
> >> >>>
> >> >>> Just for some additional background I'm running kernel 3.8.13 and
> >> >>> bluetooth modules from backports-3.18.1-1
> >> >>
> >> >> If haltest is working that means kernel is configured properly.
> >> >>
> >> >>> I have them at the bottom of "on boot" in the init.rc. I have
> >> >>> attached my kernel config and init.rc.
> >> >>
> >> >> Could you attach full logcat starting from boot?
> >> >>
> >> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
> >> >> BT enable but is needed for music streaming over BT).
> >> >>
> >> >>>
> >> >>> I noticed in the mako example the following additional modules are
> >> >>> loaded, I'm guessing I should add them also?
> >> >>> insmod /system/lib/modules/rfcomm.ko
> >> >>> insmod /system/lib/modules/bnep.ko
> >> >>
> >> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
> >> >> (BT tethering).
> >> >>
> >> >>>
> >> >>> Thanks again for the help.
> >> >>> Keith
> >> >>>
> >> >>
> >> >> --
> >> >> BR
> >> >> Szymon Janc
> >> >
> >> >
> >> >
> >> > --
> >> > Keith Conger
> >> > keith DOT conger AT gmail DOT com
> >> > http://thecongers.org
> >>
> >>
> >>
> >> --
> >> Keith Conger
> >> keith DOT conger AT gmail DOT com
> >> http://thecongers.org
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> >> the body of a message to [email protected]
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
>
--
Best regards,
Szymon Janc
Thanks I'll try that, do you know which BoardConfig option triggers
its build? Eventually I'd like to send my work in getting Bluez in the
bbbandroid repo to its maintainer.
Thanks,
Keith
On Thu, Feb 19, 2015 at 9:02 AM, Andrei Emeltchenko
<[email protected]> wrote:
> Hi Keith,
>
> On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
>> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>>
>
> This depends on your Android board configuration.
>
> afaik you can still build it locally with "mm" and copy to target
>
> adb sync should be enough
>
> Best regards
> Andrei Emeltchenko
>
>
>> It seems almost like its not even trying to start bluetoothd. I
>> wrapped it with strace, and it didn't create a trace log.
>>
>> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
>> > Ok I added the additional kernel modules.
>> >
>> > Here is a logcat from boot to turning on bluetooth in the UI.
>> >
>> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
>> >
>> > Thanks,
>> > Keith
>> >
>> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
>> >> Hi Keith,
>> >>
>> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
>> >>> Actually I had tried through the UI first and got the above logcat
>> >>> messages. I then tried HAL test.
>> >>>
>> >>> Just for some additional background I'm running kernel 3.8.13 and
>> >>> bluetooth modules from backports-3.18.1-1
>> >>
>> >> If haltest is working that means kernel is configured properly.
>> >>
>> >>> I have them at the bottom of "on boot" in the init.rc. I have
>> >>> attached my kernel config and init.rc.
>> >>
>> >> Could you attach full logcat starting from boot?
>> >>
>> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
>> >> BT enable but is needed for music streaming over BT).
>> >>
>> >>>
>> >>> I noticed in the mako example the following additional modules are
>> >>> loaded, I'm guessing I should add them also?
>> >>> insmod /system/lib/modules/rfcomm.ko
>> >>> insmod /system/lib/modules/bnep.ko
>> >>
>> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
>> >> (BT tethering).
>> >>
>> >>>
>> >>> Thanks again for the help.
>> >>> Keith
>> >>>
>> >>
>> >> --
>> >> BR
>> >> Szymon Janc
>> >
>> >
>> >
>> > --
>> > Keith Conger
>> > keith DOT conger AT gmail DOT com
>> > http://thecongers.org
>>
>>
>>
>> --
>> Keith Conger
>> keith DOT conger AT gmail DOT com
>> http://thecongers.org
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Hi Keith,
On Thu, Feb 19, 2015 at 08:39:51AM -0700, Keith Conger wrote:
> Can't seem to figure out why audio.a2dp.default.so isn't being built.
>
This depends on your Android board configuration.
afaik you can still build it locally with "mm" and copy to target
adb sync should be enough
Best regards
Andrei Emeltchenko
> It seems almost like its not even trying to start bluetoothd. I
> wrapped it with strace, and it didn't create a trace log.
>
> On Wed, Feb 18, 2015 at 3:21 PM, Keith Conger <[email protected]> wrote:
> > Ok I added the additional kernel modules.
> >
> > Here is a logcat from boot to turning on bluetooth in the UI.
> >
> > For some reason audio.a2dp.default.so didn't get built, I'm looking into that.
> >
> > Thanks,
> > Keith
> >
> > On Wed, Feb 18, 2015 at 1:37 PM, Szymon Janc <[email protected]> wrote:
> >> Hi Keith,
> >>
> >> On Wednesday 18 of February 2015 13:05:16 Keith Conger wrote:
> >>> Actually I had tried through the UI first and got the above logcat
> >>> messages. I then tried HAL test.
> >>>
> >>> Just for some additional background I'm running kernel 3.8.13 and
> >>> bluetooth modules from backports-3.18.1-1
> >>
> >> If haltest is working that means kernel is configured properly.
> >>
> >>> I have them at the bottom of "on boot" in the init.rc. I have
> >>> attached my kernel config and init.rc.
> >>
> >> Could you attach full logcat starting from boot?
> >>
> >> It looks like you are also missing audio.a2dp.default.so (it shouldn't affect
> >> BT enable but is needed for music streaming over BT).
> >>
> >>>
> >>> I noticed in the mako example the following additional modules are
> >>> loaded, I'm guessing I should add them also?
> >>> insmod /system/lib/modules/rfcomm.ko
> >>> insmod /system/lib/modules/bnep.ko
> >>
> >> Yes, rfcomm is needed for OBEX (PBAP, OPP, MAP etc). Bnep is needed for PAN
> >> (BT tethering).
> >>
> >>>
> >>> Thanks again for the help.
> >>> Keith
> >>>
> >>
> >> --
> >> BR
> >> Szymon Janc
> >
> >
> >
> > --
> > Keith Conger
> > keith DOT conger AT gmail DOT com
> > http://thecongers.org
>
>
>
> --
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html