Hi,
i have the following query.
a) (headset.c) headset_unlock
->headset_set_state(...HEADSET_CONNECTED),which in turn calls the
close_sco.
close_sco calls g_io_channel_shutdown().
I want to know whether g_io_channel_shutdown() triggers the sending of
HCI_Disconnect_Req(to remove SCO) to the LMP .
b) Also wanted to know,will the user mode BlueZ get an indication ,(if
so through which function),when the LMP sends a Disconnect Complete
Event to the Host.
I am asking the above as i see in the HCI dump, Disconnect &
Disconnect Complete messages, the issue i am facing is user mode BlueZ
calls close_sco & then calls headset_request_stream which again asks
for sco_connect(). Before the Disconnect Complete Evt is posted by
LMP. LMP reports Synchrnous Connection LImit to Device Exceeded(0X0A)
for the Synchrounous Setup Complete .
Snippet of hcidump is given below:
2009-05-08 13:43:47.540906 < HCI Command: Setup Synchronous Connection
(0x01|0x0028) plen 17
handle 42 voice setting 0x0060
2009-05-08 13:43:47.545632 > SCO data: handle 50 flags 0x00 dlen 48
0000: c1 fe ed fc f7 fb 4d fa ed f8 28 f9 cf fa d1 fd ......M...(.....
0020: 05 03 71 00 c4 fd fe fc 77 fe 54 00 ef 01 8d 03 ..q.....w.T.....
2009-05-08 13:43:47.554646 > HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2009-05-08 13:43:47.554705 < HCI Command: Disconnect (0x01|0x0006) plen 3
handle 50 reason 0x13
Reason: Remote User Terminated Connection
2009-05-08 13:43:47.565632 > SCO data: handle 50 flags 0x00 dlen 48
0000: 3a 06 4b 07 a3 05 bc 01 e7 fe 48 ff 5f ff e7 fc :.K.......H._...
0020: 2b 00 aa 04 0e 09 b6 08 ce 03 92 fb 53 f5 fb f6 +...........S...
2009-05-08 13:43:47.566646 > HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 0
0020: 62 fd e0 ff d3 00 e1 00 f3 01 eb 05 46 0a 42 0c b...........F.B.
2009-05-08 13:43:47.597617 > HCI Event: Synchronous Connect Complete
(0x2c) plen 17
status 0x0a handle 42 bdaddr 00:13:17:71:FD:88 type SCO
Error: Synchronous Connection to a Device Exceeded
2009-05-08 13:43:47.605629 > SCO data: handle 50 flags 0x00 dlen 48
0000: a7 0b 36 09 f4 05 0e 04 89 04 4e 04 ec 03 52 03 ..6.......N...R.
0010: d6 00 85 fe 01 fd 08 fc ad fb 6d fa 21 f8 3f f5 ..........m.!.?.
2009-05-08 13:43:47.607631 > HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
2009-05-08 13:43:47.615616 > SCO data: handle 50 flags 0x00 dlen 48
0000: 1f f7 44 f9 32 fb ed fc bd fd d2 fe 32 01 19 04 ..D.2.......2...
0020: 20 07 19 04 4b 02 bf 01 d7 00 d8 fd 77 fa 2a f9 ...K.......w.*.
2009-05-08 13:43:47.635626 > SCO data: handle 50 flags 0x00 dlen 48
0000: e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 ................
0020: e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 e5 f8 ................
2009-05-08 13:43:47.638651 > HCI Event: Disconn Complete (0x05) plen 4
Regards,
Sreevani M